journal article·2019-05-15

Microstructural Evaluation and Mechanical Properties of Al1050/TiO2-Graphite Hybrid Nanocomposite Produced Via Friction Stir Processing

Mohammad Farshbaf Ahmadipour, Mojtaba Movahedi, Amir Hossein Kokabi

Publisher page

Abstract

Production of Al1050/TiO2-graphite hybrid nanocomposite via friction stir processing (FSP) was studied. The effect of graphite-to-TiO2 volume fraction ratio (Gr/TiO2), at a constant rotational speed (ω) and three levels of tool traverse speed (ν), on the microstructural evolution and mechanical properties of the nanocomposites was investigated. While TiO2 is supposed to enhance the strength and hardness, graphite is believed to improve the tribological behavior. Furthermore, formation of intermetallic compounds (IMCs) through the solid-state reactions between the reinforcements and aluminum matrix may also promote the mechanical properties. To assess these assumptions, longitudinal and transverse tensile strength, Vickers microhardness, and pin-on-disk wear tests were performed. Microstructural changes and formation of compounds were explored using optical microscopy and field-emission–scanning electron microscopy (FE-SEM) as well as X-ray diffraction (XRD). ω/ν and Gr/TiO2 ratios were introduced as the main parameters to obtain the desirable material flow and particle distribution. The hardness of the nanocomposites increased by superior distribution of the reinforcements throughout the matrix. The yield strength of the nanocomposites increased up to ~82 and ~50 pct compared to the as-received and friction-stir-processed Al1050 with no reinforcement, respectively. The tribological behavior of nanocomposites improved by the presence of the graphite acting as a solid lubricant on the sliding surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. R.S. Mishra and Z. Ma: Mater. Sci. Eng. R, 2005, vol. 50 (1–2), pp. 1–78.10.1016/j.mser.2005.07.001 ↗
2. S. Sahraeinejad, H. Izadi, M. Haghshenas, and A.P. Gerlich: Mater. Sci. Eng. A, 2015, vol. 626, pp. 505–13.10.1016/j.msea.2014.12.077 ↗
3. J.L. Dossett and G.E. Totten, eds.: ASM Handbook: Steel Heat Treating, Fundamentals and Processes, ASM International, Materials Park, OH, 2013, vol. 4A, pp. 1948–62.10.31399/asm.hb.v04a.9781627081658 ↗
4. M. Gui and S.B. Kang: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2383–92.10.1007/s11661-001-0212-9 ↗
5. N. Saito, I. Shigematsu, T. Komaya, T. Tamaki, G. Yamauchi, and M. Nakamura: J. Mater. Sci. Lett., 2001, vol. 20 (20), pp. 1913–15.10.1023/A:1012882413401 ↗
6. A. Pilchak, M. Juhas, and J. Williams: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 401–08.10.1007/s11661-006-9061-x ↗
7. I. Charit and R.S. Mishra: Acta Mater., 2005, vol. 53 (15), pp. 4211–23.10.1016/j.actamat.2005.05.021 ↗
8. J. Qian, J. Li, J. Xiong, F. Zhang, and X. Lin: Mater. Sci. Eng. A, 2012, vol. 550, pp. 279–85.10.1016/j.msea.2012.04.070 ↗
9. R.S. Mishra, Z.Y. Ma, and I. Charit: Mater. Sci. Eng. A, 2003, vol. 341, pp. 307–10.10.1016/S0921-5093(02)00199-5 ↗
10. M. Bahrami, M.K.B. Givi, K. Dehghani, and N. Parvin: Mater. Des., 2014, vol. 53, pp. 519–27.10.1016/j.matdes.2013.07.049 ↗
11. A. Devaraju, A. Kumar, A. Kumaraswamy, and B. Kotiveerachari: Mater. Des., 2013, vol. 51, pp. 331–41.10.1016/j.matdes.2013.04.029 ↗
12. J.F. Guo, J. Liu, C.N. Sun, S. Maleksaeedi, G. Bi, M.J. Tan, and J. Wei: Mater. Sci. Eng. A, 2014, vol. 602, pp. 143–49.10.1016/j.msea.2014.02.022 ↗
13. C.M. Rejil, I. Dinaharan, S. Vijay, and N. Murugan: Mater. Sci. Eng. A, 2012, vol. 552, pp. 336–44.10.1016/j.msea.2012.05.049 ↗
14. F. Khodabakhshi, A. Simchi, A. Kokabi, M. Sadeghahmadi, and A. Gerlich: Mater. Sci. Technol., 2015, vol. 31 (4), pp. 426–35.10.1179/1743284714Y.0000000573 ↗
15. M. Eftekhari, M. Movahedi, and A.H. Kokabi: J. Mater. Eng. Perform., 2017, vol. 26 (7), pp. 3516–30.10.1007/s11665-017-2752-1 ↗
16. R. Bauri, D. Yadav, and G. Suhas: Mater. Sci. Eng. A, 2011, vol. 528 (13–14), pp. 4732–39.10.1016/j.msea.2011.02.085 ↗
17. V.K.S. Jain, J. Varghese, and S. Muthukumaran: Arab. J. Sci. Eng., 2019, vol. 44, pp. 949–57.10.1007/s13369-018-3312-1 ↗
18. R. Bauri: Trans. Ind. Inst. Met., 2009, vol. 62 (4–5), pp. 391–95.10.1007/s12666-009-0068-z ↗
19. M. Gui and S.B. Kang: Mater. Lett., 2001, vol. 51 (5), pp. 396–401.10.1016/S0167-577X(01)00327-5 ↗
20. M. Raaft, T. Mahmoud, H. Zakaria, and T. Khalifa: Mater. Sci. Eng. A, 2011, vol. 528 (18), pp. 5741–46.10.1016/j.msea.2011.03.097 ↗
21. R. Deaquino-Lara, N. Soltani, A. Bahrami, E. Gutiérrez-Castañeda, E. García-Sánchez, and M. Hernandez-Rodríguez: Mater. Des., 2015, vol. 67, pp. 224–31.10.1016/j.matdes.2014.11.045 ↗
22. K. Landry, S. Kalogeropoulou, and N. Eustathopoulos: Mater. Sci. Eng. A, 1998, vol. 254 (1–2), pp. 99–111.10.1016/S0921-5093(98)00759-X ↗
23. F. Akhlaghi and S. Pelaseyyed: Mater. Sci. Eng. A, 2004, vol. 385 (1–2), pp. 258–66.10.1016/S0921-5093(04)00876-7 ↗
24. H. Sarmadi, A. Kokabi, and S.S. Reihani: Wear, 2013, vol. 304 (1–2), pp. 1–12.10.1016/j.wear.2013.04.023 ↗
25. M. Ravichandran, A.N. Sait, and V. Anandakrishnan: Int. J. Miner. Metall. Mater., 2014, vol. 21 (2), pp. 181–89.10.1007/s12613-014-0883-z ↗
26. E.R. Mahmoud, M. Takahashi, T. Shibayanagi, and K. Ikeuchi: Wear, 2010, vol. 268 (9–10), pp. 1111–21.10.1016/j.wear.2010.01.005 ↗
27. T. Thirumalai, R. Subramanian, S. Kumaran, S. Dharmalingam, and S. Ramakrishnan: J. Sci. Ind. Res., 2013, vol. 73, pp. 667–70.
28. A. Sharma, V.M. Sharma, S. Mewar, S.K. Pal, and J. Paul: Mater. Manuf. Processes, 2018, vol. 33 (7), pp. 795–804.10.1080/10426914.2017.1401726 ↗
29. M. Mansumi, F. Madanisani, S. Kashani-Bozorg, and H.R. ZareieRajani: Mater. Sci. Eng. Adv. Technol., 2012, vol. 6 (1–2), pp. 29–45.
30. D. Aruri, K. Adepu, K. Adepu, and K. Bazavada: J. Mater. Res. Technol., 2013, vol. 2 (4), pp. 362–69.10.1016/j.jmrt.2013.10.004 ↗
31. S.J. Smith, R. Stevens, S. Liu, G. Li, A. Navrotsky, J. Boerio-Goates, and B.F. WoodField: Am. Mineral., 2009, vol. 94 (2–3), pp. 236–43.10.2138/am.2009.3050 ↗
32. A. Lutcov, V. Volga, and B. Dymov: Carbon, 1970, vol. 8 (6), pp. 753–60.10.1016/0008-6223(70)90100-4 ↗
33. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Oxford, United Kingdom, 2004, pp. 416–37.
34. M.S. Khorrami, S. Samadi, Z. Janghorban, and M. Movahedi: Mater. Sci. Eng. A, 2015, vol. 641, pp. 380–90.10.1016/j.msea.2015.06.071 ↗
35. N. Hansen and B. Bay: Acta Metall., 1981, vol. 29 (1), pp. 65–77.10.1016/0001-6160(81)90087-0 ↗
36. Z. Zhang and D. Chen: Scripta Mater., 2006, vol. 54 (7), pp. 1321–26.10.1016/j.scriptamat.2005.12.017 ↗
37. W. Arbegast and P. Hartley: 5th Int. Conf. on Trends in Welding Research, Pine Mountain, GA, 2002, pp. 541–46.
38. M.S. Węglowski and S. Dymek: Archfgd. CivilgfgfMech. Eng., 2013, 13(2), pp. 186–91.10.1016/j.acme.2013.01.003 ↗
39. R. Nandan, T. DebRoy, and H. Bhadeshia: Progr. Mater. Sci., 2008, vol. 53 (6), pp. 980–1023.10.1016/j.pmatsci.2008.05.001 ↗
40. Ø. Frigaard, Ø. Grong, and O. Midling: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1189–1200.10.1007/s11661-001-0128-4 ↗
41. M. Đurđanović, M. Mijajlović, D. Milčić, and D. Stamenković: Tribol. Ind., 2009, vol. 31, pp. 8–14.
42. R. Miranda, T.G. Santos, J. Gandra, N. Lopes, and R. Silva: J. Mater. Process. Technol., 2013, vol. 213 (9), pp. 1609–15.10.1016/j.jmatprotec.2013.03.022 ↗
43. S.T. Chiou, H.L. Tsai, and W.S. Lee: Mater. Trans., 2007, vol. 48 (9), pp. 2525–33.10.2320/matertrans.MRA2007607 ↗
44. C. Hsu, C. Chang, P. Kao, N. Ho, and C. Chang: Acta Mater., 2006, vol. 54 (19), pp. 5241–49.10.1016/j.actamat.2006.06.054 ↗
45. Y. Kwon, I. Shigematsu, and N. Saito: Scripta Mater., 2003, vol. 49 (8), pp. 785–89.10.1016/S1359-6462(03)00407-X ↗
46. S. Ahmadifard, S. Kazemi, and A. Heidarpour: J. Mater. Des. Appl., 2018, vol. 232 (4), pp. 287–93.
47. D. Lloyd: Int. Mater. Rev., 1994, vol. 39 (1), pp. 1–23.10.1179/imr.1994.39.1.1 ↗
48. C. Yu, P. Kao, and C. Chang: Acta Mater., 2005, vol. 53 (15), pp. 4019–28.10.1016/j.actamat.2005.05.005 ↗
49. C.F. Chen, P.W. Kao, L.W. Chang, and N.J. Ho: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 513–22.10.1007/s11661-009-0115-8 ↗
50. Q. Zhang, B. Xiao, Q. Wang, and Z. Ma: Mater. Lett., 2011, vol. 65 (13), pp. 2070–72.10.1016/j.matlet.2011.04.030 ↗
51. D. Ying, D. Zhang, and M. Newby: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2115–25.10.1007/s11661-004-0160-2 ↗
52. R. Pretorius, A. Vredenberg, F. Saris, and R. De Reus: J. Appl. Phys., 1991, vol. 70 (7), pp. 3636–46.10.1063/1.349211 ↗
53. S.H. Meng, X.H. Zhang, and W.F. Zhang: Key Eng. Mater., 2007, vol. 336, pp. 2340–43.10.4028/www.scientific.net/KEM.336-338.2340 ↗
54. Q. Zhang, B. Xiao, W. Wang, and Z. Ma: Acta Mater., 2012, vol. 60 (20), pp. 7090–7103.10.1016/j.actamat.2012.09.016 ↗
55. M.Z. Mehrizi, R. Beygi, H. Mostaan, M. Raoufi, and A. Barati: Ceram. Int., 2016, vol. 42 (15), pp. 17089–17090.10.1016/j.ceramint.2016.07.219 ↗
56. J.Q. Su, T. Nelson, R. Mishra, and M. Mahoney: Acta Mater., 2003, vol. 51 (3), pp. 713–29.10.1016/S1359-6454(02)00449-4 ↗
57. M. Fine and J. Conley: Metall. Mater. Trans. A, 1990, vol. 21A, pp. 2609–10.10.1007/BF02647010 ↗
58. T. Akao, K. Tonoko, T. Onda, and Z.C. Chen: J. Sust. Res. Eng., 2015, vol. 2 (2), pp. 45–52.
59. J.W. Kim, J.M. Lee, J.H. Lee, and J.C. Lee: Met. Mater. Int., 2014, vol. 20 (6), pp. 1151–56.10.1007/s12540-014-6020-8 ↗
60. D. Zhang, D. Ying, and P. Munroe: J. Mater. Res., 2005, vol. 20 (2), pp. 307–13.10.1557/JMR.2005.0059 ↗
61. J. Shin, H. Choi, M. Cho, and D. Bae: J. Compos. Mater., 2014, vol. 48 (1), pp. 99–106.10.1177/0021998312469238 ↗
62. J.J. Payyapilly: Ph.D. Dissertation, Virginia Tech, Blacksburg, VA, 2008, pp. 76–79.
63. H. Liu, H. Fujii, M. Maeda, and K. Nogi: J. Mater. Process. Technol., 2003, vol. 142 (3), pp. 692–96.10.1016/S0924-0136(03)00806-9 ↗
64. M.S. Khorrami, M. Kazeminezhad, Y. Miyashita, and A. Kokabi: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 188–97.10.1007/s11661-016-3812-0 ↗
65. E. Hall: Proc. Phys. Soc., 1951, Sect. B, vol. 64 (9), p. 742–47.10.1088/0370-1301/64/9/302 ↗
66. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25–28.
67. J. Eshelby, F. Frank, and F. Nabarro: London, Edinburgh, Dublin Philos. Mag. J. Sci., 1951, vol. 42 (327), pp. 351–64.10.1080/14786445108561060 ↗
68. Y.S. Sato, M. Urata, H. Kokawa, and K. Ikeda: Mater. Sci. Eng. A, 2003, vol. 354 (1–2), pp. 298–305.10.1016/S0921-5093(03)00008-X ↗
69. H. Fujita and T. Tabata: Acta Metall., 1973, vol. 21 (4), pp. 355–65.10.1016/0001-6160(73)90191-0 ↗
70. N. Hansen: Acta Metall., 1977, vol. 25 (8), pp. 863–69.10.1016/0001-6160(77)90171-7 ↗
71. T. Shanmugasundaram, M. Heilmaier, B. Murty, and V.S. Sarma: Mater. Sci. Eng. A, 2010, vol. 527 (29–30), pp. 7821–25.10.1016/j.msea.2010.08.070 ↗
72. N. Hansen: Scripta Mater., 2004, vol. 51 (8), pp. 801–06.10.1016/j.scriptamat.2004.06.002 ↗
73. S. Hsu, M. Shen, and A. Ruff: Tribol. Int., 1997, vol. 30 (5), pp. 377–83.10.1016/S0301-679X(96)00067-9 ↗
74. M.R. Rosenberger, E. Forlerer, and C. Schvezov: Wear, 2009, vol. 266 (1–2), pp. 356–59.10.1016/j.wear.2008.06.007 ↗
75. M. Rosenberger, C. Schvezov, and E. Forlerer: Wear, 2005, vol. 259 (1–6), pp. 590–601.10.1016/j.wear.2005.02.003 ↗
76. F. Gul and M. Acilar: Compos. Sci. Technol., 2004, vol. 64 (13–14), pp. 1959–70.10.1016/j.compscitech.2004.02.013 ↗
77. A.M. Asl and S.T. Khandani: J. Mater. Sci. Eng. A, 2013, vol. 559, pp. 549–57.10.1016/j.msea.2012.08.140 ↗
78. B. Bhushan: Modern Tribology Handbook, CRC Press, Boca Raton, FL, 2001, pp. 787–825.