Effect of Temper Condition on Stress Relaxation Behavior of an Aluminum Copper Lithium Alloy
Source abstract
Abstract
Deformation behavior of an Al-Cu-Li alloy in different temper conditions (solutionized and T8) is investigated using stress relaxation tests. Fundamental parameters such as the apparent and physical activation volume, strain rate sensitivity, effective stress, and exhaustion rate of mobile dislocation density are determined from single and multiple relaxation tests. It was found that dislocation–dislocation interaction controls the kinetics of plastic deformation in the solutionized sample, whereas dislocation–precipitate interaction is the overriding factor in the presence of T1 precipitates. The apparent activation volume was found to be significantly lower in the presence of T1 precipitates compared with solutionized samples. Strain rate sensitivity and effective stress were found to be higher in the presence of T1 precipitates. In addition, multiple relaxation tests showed that irrespective of microstructural features (solutes, semi-coherent precipitates), the mobile dislocation density reduces during the relaxation period. Further evidence regarding reduction in mobile dislocation density is obtained from uniaxial tensile tests carried out after stress relaxation tests, where both solutionized and T8 samples show an increase in strength. Additional discussion on relaxation strain is included to provide a complete overview regarding the time-dependent deformation behavior of the Al-Cu-Li alloy in different temper conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. C. Giummarra, B. Thomas and R.J. Rioja: in Proceedings of the Light Metals Technology Conference, 2007.
2. [2] R.J. Rioja and J. Liu: Metall. Trans. A, 2012, vol. 43, pp. 3325-3337.10.1007/s11661-012-1155-z ↗
3. [3] T. Warner: Mater. Sci. Forum, 2012, vol. 519-521, pp. 1271-1278.
4. [4] J. Davies: Aluminium and Aluminium Alloys, ASM international, Ohio, 1993, pp. 121-142.
5. [5] B. Gable, A. Zhu, A. Csontos and E. Starke: J. Light Met., 2001, vol. 1, pp. 1-14.10.1016/S1471-5317(00)00002-X ↗
6. [6] W. Cassada, G. Shiflet and E. Starke: Metall. Trans. A, 1991, vol. 22, pp. 299-306.10.1007/BF02656799 ↗
7. [7] S. Ringer, B. Muddle and I. Polmear: Metall. Trans. A, 1995, vol. 26, pp. 1659-1671.10.1007/BF02670753 ↗
8. [8] R. Yoshimura, T.J. Konno, E. Abe and K. Hiraga: Acta Mater., 2003, vol. 51, pp. 4251-4266.10.1016/S1359-6454(03)00253-2 ↗
9. [9] R. Yoshimura, T.J. Konno, E. Abe and K. Hiraga: Acta Mater., 2003, vol. 51, pp. 2891-2903.10.1016/S1359-6454(03)00104-6 ↗
10. [10] A. Khan and J. Robinson: Mater. Sci. Technol., 2008, vol. 24, pp. 1369-1377.10.1179/174328408X262391 ↗
11. [11] B. Huang, Z.Q. Zheng, D. Yin and Z. Mo: Mater. Sci. Forum, 1996, vol. 217-222, pp. 1239-1244.10.4028/www.scientific.net/MSF.217-222.1239 ↗
12. [12] B. Rodgers and P. Prangnell: Acta Mater., 2016, vol. 108, pp. 55-67.10.1016/j.actamat.2016.02.017 ↗
13. [13] B. Noble and G. Thompson: Met Sci, 1972, vol. 6, pp. 167-174.10.1179/030634572790445975 ↗
14. [14] P. Donnadieu, Y. Shao, F. De Geuser, G. Botton, S. Lazar, M. Cheynet, M. De Boissieu and A. Deschamps: Acta Mater, 2011, vol. 59, pp. 462-472.10.1016/j.actamat.2010.09.044 ↗
15. [15] W. Cassada, G. Shiflet and E. Starke: Metall. Trans. A, 1991, vol. 22, pp. 287-297.10.1007/BF02656798 ↗
16. [16] K. Kumar, S. Brown and J.R. Pickens: Acta Mater., 1996, vol. 44, pp. 1899-1915.10.1016/1359-6454(95)00319-3 ↗
17. J. Huang and A. Ardell: J. Phys. Colloq., 1987, vol. 48 (C3), pp. C3-373–C3-383.10.1051/jphyscol:1987343 ↗
18. [18] J.F. Nie, B.C. Muddle and I.J. Polmear: Mater. Sci. Forum, 1996, vol. 217-222, pp. 1257-1262.10.4028/www.scientific.net/MSF.217-222.1257 ↗
19. [19] A. Zhu and E. Starke: Acta Mater., 1999, vol. 47, pp. 3263-3269.10.1016/S1359-6454(99)00179-2 ↗
20. [20] A. Deschamps, B. Decreus, F. De Geuser, T. Dorin and M. Weyland: Acta Mater., 2013, vol. 61, pp. 4010-4021.10.1016/j.actamat.2013.03.015 ↗
21. [21] T. Dorin, A. Deschamps, F.D. Geuser and C. Sigli: Acta Mater., 2014, vol. 75, pp. 134-146.10.1016/j.actamat.2014.04.046 ↗
22. 22.D. Caillard and J.L. Martin: Thermally Activated Mechanisms in Crystal Plasticity. Elsevier, Amsterdam, 2003.
23. [23] L. Lu, T. Zhu, Y. Shen, M. Dao, K. Lu and S. Suresh: Acta Mater., 2009, vol. 51, pp. 5165-5173.10.1016/j.actamat.2009.07.018 ↗
24. [24] R. Bonadé and P. Spätig: Mater Sci Eng A, 2008, vol. 483-484, pp. 203-206.10.1016/j.msea.2006.10.196 ↗
25. [25] I. Gupta and J.C. Li: Metall. Trans. B, 1970, vol. 1, pp. 2323-2330.10.1007/BF02643451 ↗
26. [26] D. Lee and E. Hart: Metall. Trans. B, 1971, vol. 2, pp. 1245-1248.10.1007/BF02664258 ↗
27. [27] M.S. Mohebbi, A. Akbarzadeh, Y.O. Yoon and S.K. Kim: Mech. Mater., 2015, vol. 89, pp. 23-34.10.1016/j.mechmat.2015.06.001 ↗
28. [28] X. Wu, X. San, Y. Gong, L. Chen, C. Li and X. Zhu: Mater. Des, 2013, vol. 47, pp. 295-299.10.1016/j.matdes.2012.12.020 ↗
29. [29] X.S. Yang, Y.J. Wang, G.Y. Wang, H.R. Zhai, L.H. Dai and T.Y. Zhang: Acta Mater., 2016, vol. 108, pp. 252-263.10.1016/j.actamat.2016.02.021 ↗
30. [30] T. Kruml, O. Coddet and J. Martin: Acta Mater., 2008, vol. 56, pp. 333-340.10.1016/j.actamat.2007.09.027 ↗
31. [31] J. Kubát and M. Rigdahl: Phys. Status Solidi (a), 1976, vol. 35, pp. 173-180.10.1002/pssa.2210350119 ↗
32. [32] M.S. Mohebbi and A. Akbarzadeh: Int. J. Plast., 2017, vol. 90, pp. 167-176.10.1016/j.ijplas.2017.01.003 ↗
33. [33] S. Wang, N. Hashimoto and S. Ohnuki: Mater Sci Eng A, 2013, vol. 562, pp. 101-108.10.1016/j.msea.2012.10.100 ↗
34. [34] S. Wang, N. Hashimoto, Y. Wang and S. Ohnuki: Acta Mater., 2013, vol. 61, pp. 4734-4742.10.1016/j.actamat.2013.05.007 ↗
35. [35] S. Mishra, K. Kulkarni and N. P. Gurao: Mater. Des, 2015, vol. 87, pp. 507-519.10.1016/j.matdes.2015.08.008 ↗
36. [36] D. Lloyd and J. Embury: Phys. Status Solidi b, 1971, vol. 43, pp. 393-399.10.1002/pssb.2220430141 ↗
37. [37] H.J. Harun and P.G. McCormick: Acta Metall., 1979, vol. 27, pp. 155-159.10.1016/0001-6160(79)90067-1 ↗
38. [38] H. Gleiter and E. Hornbogen: Mater Sci Eng, 1968, vol. 2, pp. 285-302.10.1016/0025-5416(68)90047-5 ↗
39. [39] D.M. Riley and P.G. McCormick: Acta Metall., 1977, vol. 25, pp. 181-185.10.1016/0001-6160(77)90121-3 ↗
40. [40] J.P. Hirth: Metall. Trans. B, 1972, vol. 3, pp. 3047-3067.10.1007/BF02661312 ↗