journal article·2017-03

On the Prospects of Using Nanoindentation and Wear Test to Study the Mechanical Behavior of Fe-Based Metallic Glass Coating Reinforced by B4C Nanoparticles

Behrooz Movahedi

Publisher page

Abstract

In this study, Fe-based metallic glass was served as the matrix in which various ratios of hard B4C nanoparticles as reinforcing agents were prepared using a high-energy mechanical milling. The feedstock nanocomposite powders were transferred to the coatings using a high-velocity oxygen fuel process. The results showed that the microstructure of the nanocomposite coating was divided into two regions, namely a full amorphous phase region and homogeneous dispersion of B4C nanoparticles with a scale of 10 to 50 nm in a residual amorphous matrix. As the B4C content is increased, the hardness of the composite coatings is increased too, but the fracture toughness begins to be decreased at the B4C content higher than 20 vol pct. The optimal mechanical properties are obtained with 15 vol pct B4C due to the suitable content and uniform distribution of nanoparticles. The addition of 15 vol pct B4C to the Fe-based metallic glass matrix reduced the friction coefficient from 0.49 to 0.28. The average specific wear rate of the nanocomposite coating (0.48 × 10−5 mm3 Nm−1) was much less than that for the single-phase amorphous coating (1.23 × 10−5 mm3Nm−1). Consequently, the changes in wear resistance between both coatings were attributed to the changes in the brittle to ductile transition by adding B4C reinforcing nanoparticles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Material Properties and Applications · Polymer Science and Applications · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. J. Do, S. Jung, H-J. Lee, B-J. Lee, G-U. Cha, C.Y. Jo and S. Lee: Metall.Tranns. A, 2013, vol. 44, pp. 2573-80.10.1007/s11661-013-1615-0 ↗
2. C. Zhang, L. Liu, K.C. Chan, Q. Chen and C.Y. Tang: Intermetallics, 2012, vol. 29, pp. 80-5.10.1016/j.intermet.2012.05.004 ↗
3. D.J. Branagan: Computer Coupling of Phase Diagrams and Thermochemistry 2007, vol. 31, pp. 343-50.10.1016/j.calphad.2007.02.003 ↗
4. D.J. Branagan and Y. Tang: Composites A, 2002, vol. 33, pp. 855-59.10.1016/S1359-835X(02)00028-3 ↗
5. D.Z. Segu, J.H. Choi, S. Yi and S.S. Kim: Tribol Lett, 2012, vol. 47, pp. 131-38.10.1007/s11249-012-9969-9 ↗
6. S.F. Guo, L. Liu, N. Li and Y. Li: Scripta Materialia 2010, vol. 62, pp. 329-32.10.1016/j.scriptamat.2009.10.024 ↗
7. C. Suryanarayana and A. Inoue: BULK METALLIC GLASSES. (Taylor and Francis Group, LLC, 2011).
8. T. Terajima, F. Takeuchi, K. Nakata, S. Adachi, K. Nakashima and T. Igarashi: Journal of Alloys and Compounds 2010, vol. 504, pp. 288-91.10.1016/j.jallcom.2010.03.209 ↗
9. S. Yugeswaran, A. Kobayashi, K. Suresh and B. Subramanian: Journal of Alloys and Compounds, 2013, vol. 551, pp. 168–75.10.1016/j.jallcom.2012.09.111 ↗
10. B.Y. Fu, D.Y. He, L.D. Zhao and X.Y. Li: Surface Engineering, 2009, vol. 25, pp. 326-32.10.1179/026708409X364966 ↗
11. D.H. Kwon, E.S. Park, M.Y. Huh, H.J. Kim and J.C. Bae: Journal of Alloys and Compounds 2011, vol. 509S, pp. S105–S108.10.1016/j.jallcom.2010.12.108 ↗
12. T. Lampke, B. Wielage, H. Pokhmurska, C. Rupprecht, S. Schuberth, R. Drehmann and F. Schreiber: Surface and Coatings Technology 2011, vol. 205, pp. 3671–76.10.1016/j.surfcoat.2011.01.003 ↗
13. J.Y.Suh and D.H.Bae: Materials Science and Engineering A 2013, vol. 582, pp. 321-25.10.1016/j.msea.2013.06.057 ↗
14. H. Choi-Yim and W. L. Johnson: Appl. Phys. Lett 1997, vol. 71, pp. 3808-10.10.1063/1.120512 ↗
15. L. Liu and C. Zhang: Thin Solid Films 2014, vol. 561, pp. 70-86.10.1016/j.tsf.2013.08.029 ↗
16. Y. Cao, C. Huang, W. Liu, W. Zhang, L. Du, Journal of Thermal Spray Technology 2014, vol. 23, pp. 716-24.10.1007/s11666-014-0061-x ↗
17. S. Yoon, J. Kim, B.D. Kim and C. Lee: Surface and Coatings Technology 2010, vol. 205, pp. 1962–68.10.1016/j.surfcoat.2010.08.078 ↗
18. G. Liu, Y. A.J. Chen, G. Hou and J. Chen: Tribol Lett 2012, vol. 46, pp. 131–38.10.1007/s11249-012-9929-4 ↗
19. H. J. KIM, K. M. LIM, B. G. SEONG and B. G. SEONG: JOURNAL OF MATERIALS SCIENCE 2001, vol. 36, pp. 49– 54.10.1023/A:1004878421908 ↗
20. W. Tillmann, P. S. Hollingsworth, G. Fischer, J. Nellesen and F. Beckmann: Journal of Thermal Spray Technology 2014, vol. 23, pp. 289-95.10.1007/s11666-013-0036-3 ↗
21. Y. Wu, P. Lin, G. Xie, J. Hu and M. Cao: Materials Science and Engineering A 2006, vol. 430, pp. 34-39.10.1016/j.msea.2006.05.095 ↗
22. B. Movahedi: in Advanced Plasma Spray Applications, H. Salimi Jazi, ed., InTech, Rijeka, 2012, pp 189–218.
23. J-B. Cheng, X-B. Liang, B-S. Xu and Y-X. Wu: Journal of Non-Crystalline Solids 2009, vol. 355, pp. 1673–78.10.1016/j.jnoncrysol.2009.06.024 ↗
24. B. Movahedi, M.H. Enayati and C.C. Wong, Journal of Thermal Spray Technology 2010, vol. 19, pp. 1093–99.10.1007/s11666-010-9507-y ↗
25. W. Guo, Y. Wu, J. Zhang, S. Hong, G. Li, G. Ying, J. Guo and Y. Qin: J. Therm. Spray Technol. 2014, vol. 23, pp. 1157-80.10.1007/s11666-014-0096-z ↗
26. B. Movahedi, M.H. Enayati and C.C. Wong: Materials Letters 2010, vol. 64, pp. 1055–58.10.1016/j.matlet.2010.02.008 ↗
27. B. Movahedi, M.H. Enayati and C.C. Wong: Materials Science and Engineering B 2010, vol. 172, pp. 50–54.10.1016/j.mseb.2010.04.016 ↗
28. B. Movahedi, Advanced Powder Technology 2014, vol. 25, pp. 871–78.10.1016/j.apt.2014.01.002 ↗
29. A.G. Evans and T.R. Wilshaw: Acta Metallurgica 1976, vol. 24, pp. 939–56.10.1016/0001-6160(76)90042-0 ↗
30. D.J. BRANAGAN, W.D. SWANK, D.C. HAGGARD and J.R. FINCKE, METALLURGICAL AND MATERIALS TRANSACTIONS A: 2001, vol. 32, pp. 2615-21.10.1007/s11661-001-0051-8 ↗
31. E. Salahinejad, R. Amini, E.A. Bajestani and M. Hadianfard: Journal of Alloys and Compounds 2010, vol. 497, pp. 369-72.10.1016/j.jallcom.2010.03.071 ↗
32. Y. Kim, K. Hiraga, A. Inoue, T. Masumoto and H. Jo: Mater. Trans. JIM 1994, vol. 35, pp. 293-302.10.2320/matertrans1989.35.293 ↗
33. Z. Zhou, L. Wang, D.Y. He, F.C. Wang and Y.B. Liu: Journal of Thermal Spray Technology 2010, vol. 19, pp. 1287–93.10.1007/s11666-010-9556-2 ↗
34. K. Wang, T. Fujita, D. Pan, T.G. Nieh, A. Inoue, D.H. Kim and M.W. Chen: Acta Mater 2008, vol. 56, pp. 3077–87.10.1016/j.actamat.2008.02.047 ↗
35. M. Iqbal, J.I. Akhter, H.F. Zhang and Z.Q. Hu: Journal of Non-Crystalline Solids 2008, vol. 354, pp. 5363–67.10.1016/j.jnoncrysol.2008.09.027 ↗
36. M. Iqbal, J.I. Akhter, H.F. Zhang and Z.Q. Hu: Journal of Non-Crystalline Solids 2008, vol. 354, pp. 3284–90.10.1016/j.jnoncrysol.2008.02.009 ↗
37. V. Keryvin, V.H. Hoang and J. Shen: Intermetallics 2009, vol. 19, pp. 211-7.10.1016/j.intermet.2008.08.017 ↗
38. P.A. Hess, S.J. Poon, G.J. Shiflet and R.H. Dauskardt: J. Mater. Res 2005, vol. 20, pp. 783-6.10.1557/JMR.2005.0104 ↗
39. B. Movahedi: Surface and Coatings Technology 2013, vol. 235, pp. 212–9.10.1016/j.surfcoat.2013.07.035 ↗
40. M. Aizenshtein, I. Mizrahi, N. Froumin, S. Hayun, M.P. Dariel and N. Frage: Materials Science and Engineering A 2008, vol. 495, pp. 70-4.10.1016/j.msea.2007.06.100 ↗
41. C-J. Li, Y-Y. Wang and H. Li: J. Vac. Sci. Technol. A 2004, vol. 22, pp. 2000-04.10.1116/1.1776183 ↗
42. A. Cavaleiro and J.T.M.D. Hosson: Nanostructured Coatings. (Springer, New York, 2006).10.1007/978-0-387-48756-4 ↗
43. H.W. Jin, R. Ayer, J.Y. Koo, R. Raghavan and U. Ramamurty: J. Mater. Res. 2007, vol. 22, pp. 264-73.10.1557/jmr.2007.0048 ↗
44. A. Leyland and A. Matthews: Surface and Coatings Technology 2004, vol. 177-178, pp. 317–24.10.1016/j.surfcoat.2003.09.011 ↗