journal article·2016-07

Microstructural Evolution and Wear Resistance of Friction Stir-Processed AISI 52100 Steel

R. A. Seraj, A. Abdollah-zadeh, M. Hajian, F. Kargar, R. Soltanalizadeh

Publisher page

Abstract

Friction stir processing (FSP) was successfully applied on AISI 52100 steel. The influence of process parameters on the microstructure and mechanical properties of the material was evaluated. It was observed that the initial ferritic-pearlitic microstructure of the base metal is transformed to the martensitic microstructure with retained austenite in the stir zone. The results also showed that microhardness and wear resistance of the FSP samples are, respectively, at least 2 and 15 times higher than those of the base metal. The improvement of the mechanical properties of FSP samples was attributed to their microstructural characteristics. The mechanisms controlling the wear behavior of the base metal and FSP samples were also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. A.M. Elwazri, P. Wanjara, S. Yue, Mater. Sci. Eng.: A, 2005, vol. 404, pp. 91-98.10.1016/j.msea.2005.05.051 ↗
2. C. Lorenzo-Martin, O.O. Ajayi: Wear, 2015, vol. 332-33, pp. 962-970.10.1016/j.wear.2015.01.052 ↗
3. Y.S. Sato, H. Yamanoi, H. Kokawa, T. Furuhara: Scripta Mater.,2007, vol. 57, pp. 557-560.10.1016/j.scriptamat.2007.04.050 ↗
4. M.I. Costa, D. Verdera, M.T. Vieira, D.M. Rodrigues: Appl. Surf. Sci., 2014, vol. 296, 214-220.10.1016/j.apsusc.2014.01.094 ↗
5. K. Dai, L. Shaw: Mater. Sci. Eng.: A, 2007, vol. 463, pp. 46-53.10.1016/j.msea.2006.07.159 ↗
6. R.S. Mishra, Z.Y. Ma: Mater. Sci. Eng., R: Reports,2005, vol. 50, pp. 1-78.10.1016/j.mser.2005.07.001 ↗
7. Z.Y. Ma: Metall. Mater. Trans. A,2008, vol. 39, pp. 642-658.10.1007/s11661-007-9459-0 ↗
8. M. St. Węglowski, A. Pietras: Arch. Metall. Mater., 2011, vol. 56, p. 779–88.10.2478/v10172-011-0086-9 ↗
9. H. Arora, H. Singh, B. Dhindaw: Int. J. Adv. Manuf. Tech.,2012, vol. 61, pp. 1043-1055.10.1007/s00170-011-3758-8 ↗
10. Y. Kitamura, Y. Morisada, T. Mizuno, G. Abe, T. Nagaoka, Y. Kimoto, M. Fukusumi, H. Fujii: in Proceedings of the 1st International Joint Symposium on Joining and Welding, H. Fujii, ed., Woodhead Publishing, Cambridge. 2013, pp. 377–81.10.1533/978-1-78242-164-1.377 ↗
11. D.H. Choi, C.Y. Lee, B.W. Ahn, J.H. Choi, Y.M. Yeon, K. Song, S.G. Hong, W.B. Lee, K.B. Kang, S.B. Jung: J. Mater. Sci. Tech.,2011, vol. 27, pp. 127-130.10.1016/S1005-0302(11)60037-6 ↗
12. S.H. Aldajah, O.O. Ajayi, G.R. Fenske, S. David: Wear, 2009, vol. 267, pp. 350-355.10.1016/j.wear.2008.12.020 ↗
13. H.H. Cho, S.T. Hong, J.H. Roh, H.S. Choi, S.H. Kang, R.J. Steel, H.N. Han: Acta Mater.,2013, vol. 61, pp. 2649-2661.10.1016/j.actamat.2013.01.045 ↗
14. Y.C. Chen, K. Nakata: Mater. Charact.,2009, vol. 60, pp. 1471-1475.10.1016/j.matchar.2009.07.004 ↗
15. S. Dodds, A.H. Jones, S. Cater: Wear,2013, vol. 302, pp. 863-877.10.1016/j.wear.2013.01.007 ↗
16. Y. Yano, Y.S. Sato, Y. Sekio, S. Ohtsuka, T. Kaito, R. Ogawa, H. Kokawa: J. Nucl. Mater.,2013, vol. 442, pp. S524-S528.10.1016/j.jnucmat.2012.10.038 ↗
17. S.A. Khodir, Y. Morisada, R. Ueji, H. Fujii: Mater. Sci. Eng.: A, 2012, vol. 558, pp. 572-578.10.1016/j.msea.2012.08.052 ↗
18. Y.F. Sun, J.M. Shen, Y. Morisada, H. Fujii: Mater. Design, 54 (2014) 450-457.10.1016/j.matdes.2013.08.071 ↗
19. L. Cui, H. Fujii, N. Tsuji, K. Nogi: Scripta Mater., 2007, vol. 56, pp. 637-640.10.1016/j.scriptamat.2006.12.004 ↗
20. V. Manvatkar, A. De, L.E. Svensson, T. DebRoy: Scripta Mater., 2015, vol. 94, pp. 36-39.10.1016/j.scriptamat.2014.09.012 ↗
21. J.D. Verhoeven: Steel Metallurgy for the Non-metallurgist. (ASM International, Materials Park 2007).10.31399/asm.tb.smnm.9781627082648 ↗
22. G. Krauss: Mater, Sci, Eng, A., 1999, Vol. 273-275, pp. 40-57.10.1016/S0921-5093(99)00288-9 ↗
23. Griffiths B. J.: J. Tribol.,1985, vol. 107, pp. 165-171.10.1115/1.3261015 ↗
24. D. Umbrello, G. Rotella: Mater. Sci. Tech.,2012, vol. 28, pp. 205-212.10.1179/1743284711Y.0000000020 ↗
25. Chung F., J. Appl. Cryst., 1974, vol. 7, pp. 519-525.10.1107/S0021889874010375 ↗
26. H. Pashazadeh, J. Teimournezhad and A. Masoumi: Mater. Design, 2014, vol. 55, pp. 619-632.10.1016/j.matdes.2013.09.028 ↗
27. S. M. Shamakhsudov: Met. Sci. Heat Treat.,1983, vol. 25, pp. 365–67.10.1007/BF00795698 ↗
28. Y. Wang, T. Lei and J. Liu: Wear,1999, vol. 231, pp. 12-19.10.1016/S0043-1648(99)00116-7 ↗
29. N. Ojala, K. Valtonen, V. Heino, M. Kallio, J. Aaltonen, P. Siitonen and V. T. Kuokkala: Wear,2014, vol. 317, pp. 225-232.10.1016/j.wear.2014.06.003 ↗
30. R. Colaço and R. Vilar: Wear,2005, vol. 258, pp. 225-231.10.1016/j.wear.2004.09.029 ↗
31. J. Rendón and M. Olsson: Wear,2009, vol. 267, pp. 2055-2061.10.1016/j.wear.2009.08.005 ↗
32. In Tribology Series, ed. K-H Zum Gahr (Elsevier, Amsterdam: 1987), pp 80-131. -->
33. S. Ahmad Alidokht, A. Abdollah-zadeh, S. Soleymani, T. Saeid and H. Assadi: Mater. Charact., 2012, vol. 63, pp. 90-97.10.1016/j.matchar.2011.11.007 ↗
34. P. Mukhopadhyay, P. S. Kannaki, M. Srinivas and M. Roy: Wear,2014, vol. 315, pp. 31-37.10.1016/j.wear.2014.03.010 ↗