Effect of Rolling Temperature and Ultrafast Cooling Rate on Microstructure and Mechanical Properties of Steel Plate
Source abstract
Abstract
Microstructure can vary significantly through thickness after ultrafast cooling of rolled steel plates, impacting their mechanical properties. This study examined the microstructure, microstructural banding at centerline, and mechanical properties through thickness for different ultrafast cooling conditions and rolling temperatures. One set of steels (UC1 and UC2) were ultrafast-cooled (UFC) at 40 K/s after finish rolling at 1223 K and 1193 K (950 °C and 910 °C), respectively, while the second set (LC) was cooled by laminar cooling at 17 K/s after finish rolling at 1238 K (965 °C). UFC produced microstructural variation through thickness; highly dislocated lath-type bainitic ferrite was formed near the surface, whereas the primary microstructure was acicular ferrite and irregular polygonal ferrite in the interior of UC1 and UC2 steels, respectively. However, UFC has the advantage of suppression of microstructural banding in centerline segregation regions. The ferrite grain size in both UFC-cooled steels was refined to ~5 μm, increasing strength and toughness. The optimum combination of properties was obtained in UC2 steel with appropriate low finish rolling temperature, being attributed to the distinct microstructure resulting from work-hardened austenite before UFC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. C. Ouchi: ISIJ Int., 2001, vol. 41(6), pp. 542–53.10.2355/isijinternational.41.542 ↗
2. K. Omata, H. Yoshimura, S. Yamamoto: NKK Tech Rev., 2003, vol. 88, pp. 73–80.
3. G.D. Wang: Shanghai Met. (China), 2008, vol. 30(3), pp. 1–4.10.1109/CICED.2008.5211769 ↗
4. G.D. Wang: J. Northeast. Univ. (China), 2009, vol. 30(7), pp. 913–22.
5. L. J. Xu: in Advanced Steels, Y. Weng, H. Dong, Y. Gan (Eds.), Springer, Berlin, 2011, pp. 9–14.
6. Y. Tian, S. Tang, B.X. Wang, Z.D. Wang, G.D. Wang: Sci. Chin. Ser. E: Technol. Sci., 2012, vol. 55(6), pp. 1566–71.10.1007/s11431-012-4744-6 ↗
7. M. Pietrzyk, C. Roucoules, P.D. Hodgson: ISIJ Int., 1995, vol. 35(5), pp. 531–41.10.2355/isijinternational.35.531 ↗
8. S. Tang, Z.Y. Liu, G.D. Wang, R. Misra: Mater. Sci. Eng. A, 2013, vol. 580, pp. 257–65.10.1016/j.msea.2013.05.016 ↗
9. J. Chen, M.Y. Lv, S. Tang, Z.Y. Liu, G.D. Wang: Mater. Sci. Eng. A, 2014, vol. 594, pp. 389–93.10.1016/j.msea.2013.09.086 ↗
10. D. Chae, D. Koss, A. Wilson, P. Howell: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 995–1005.10.1007/s11661-000-1017-y ↗
11. F. D’Errico: J. Fail. Anal. Prev., 2010, vol. 10(5), pp. 351–57.10.1007/s11668-010-9374-3 ↗
12. J.S. Kirkaldy, J. von Destinon-Forstmann, R.J. Brigham: Can. Metall. Q., 1962, vol. 1, p. 5981.10.1179/cmq.1962.1.1.59 ↗
13. R.A. Grange: Metall. Trans., 1971, vol. 2(2), pp. 417–26.10.1007/BF02663328 ↗
14. S.W. Thompson, P.R. Howell: Mater. Sci. Technol., 1992, vol. 8(9), pp. 777–84.10.1179/mst.1992.8.9.777 ↗
15. J.D. Verhoeven: J. Mater. Eng. Perform., 2000, vol. 9(3), pp. 286–96.10.1361/105994900770345935 ↗
16. S.E. Offerman, N.H. van Dijk, MTh Rekveldt, J. Sietsma, S. van der Zwaag: Mater. Sci. Technol., 2002, vol. 18, pp. 297–303.10.1179/026708301225000752 ↗
17. T.F. Majka, D.K. Matlock, G. Krauss: Metall. Mater. Trans. A, 2002, vol. 33A, 1627–37.10.1007/s11661-002-0172-8 ↗
18. G. Krauss: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 781–92.10.1007/s11663-003-0084-z ↗
19. F. Boratto, R. Barbosa, S. Yue, J. J. Jonas: in Proceedings of the International Conference of “Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals” (THERMEC-88), Vol. 1: ISIJ, Tokyo, Japan, 1988, pp. 383–90.
20. D.Q. Bai, S. Yue, W.P. Sun, J.J. Jonas: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 2151–59.10.1007/BF02648589 ↗
21. W.S. Rasband: ImageJ, US National Institutes of Health, Bethesda, Maryland, http://imagej.nih.gov/ij/. Accessed 1997–2015.
22. ASTM Standard E112: Test Methods for Determining Average Grain Size, 2013.
23. ASTM Standard E8/E8M-13a: Standard Test Methods for Tension Testing of Metallic Materials, 2013.
24. ASTM Standard E23: Standard Test Methods for Notched Bar Impact testing of Metallic Materials, 2012.
25. IACS UR W: Unified Requirements Concerning Materials and Welding, 2014.
26. A.J. DeArdo: Ironmak. Steelmak., 2001, vol. 28(2), pp. 138–144.10.1179/030192301678055 ↗
27. T. Tanaka: Int. Mater. Rev., 1981, vol. 26(1), pp. 185–21210.1179/imr.1981.26.1.185 ↗
28. G. Krauss, S.W. Thompson: ISIJ Int., 1995, vol. 35(8), pp. 937–45.10.2355/isijinternational.35.937 ↗
29. Q.B. Ye, Z.Y. Liu, and G.D. Wang: in HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015 Conference Proceedings, WILEY & TMS, Hangzhou, China, Nov, 11th–13th, pp. 365–70
30. R.L. Bodnar, S.S. Hansen: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 665–7510.1007/BF02665443 ↗
31. H.K.D.H. Bhadeshia: Bainite in Steels: Transformations, Microstructure and Properties, 2nd Edition, IOM Communications Ltd., London, 2001, p. 26.
32. T. Tanaka: in Accelerated Cooling of Rolled Steel, G.E. Ruddle, A.F. Crawley (Eds.), Pergamon, Oxford, 1988: pp. 187–208.
33. I. Tamura, H. Sekine, T. Tanaka, C. Ouchi: Thermomechanical Processing of High-Strength Low-Alloy Steels, Butterworths, London, 1988
34. M.C. Flemings, K. Toshihiko: Making, Shaping and Treating of Steel, 11th Edition, Vol. Casting Volume, Ch. 6: Solidification of Steel, The AISE Steel Foundation, Pittsburgh, PA., 2003, pp. 6.1–6.21.
35. P.E.J. Rivera-Diaz-Del-Castillo, J. Sietsma, S. Van Der Zwaag: Metall. Mater. Trans. A, 2004, vol. 35, pp. 425–33.10.1007/s11661-004-0353-8 ↗
36. Thermo-Calc Software TCFE6 Steels/Fe-Alloys Database Version 6, 2009. (Accessed 23 Aug 2013).
37. H.K.D.H. Bhadeshia, J.W. Christian: Metall. Trans. A , 1990, 21, 767–9710.1007/BF02656561 ↗
38. G.I. Rees, H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1994, vol. 10, pp. 353–58.10.1179/mst.1994.10.5.353 ↗
39. C.L. Davis, M. Strangwood: Mater. Sci. Technol., 2009, vol. 25(9), pp. 1126–3310.1179/174328409X453262 ↗
40. A.J. DeArdo: Can. Metall. Q., 1988, vol. 27(2), pp. 141–5410.1179/cmq.1988.27.2.141 ↗
41. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, 1997, p. 45.
42. K. Shibata, K. Asakura: ISIJ Int., 1995, vol. 35(8), pp. 982–91.10.2355/isijinternational.35.982 ↗
43. J. Heslop, N.J. Petch, Philos. Mag. 3(34), 1128–36 (1958)10.1080/14786435808237043 ↗
44. T. Yamane, K. Hisayuki, Y. Kawazu, T. Takahashi, Y. Kimura, S. Tsukuda: J. Mater. Sci., 2002, vol. 37(18), pp. 3875–7910.1023/A:1019695104094 ↗
45. F.G. Caballero, M.K. Miller, C. Garcia-Mateo, J. Cornide, M.J. Santofimia: Scr. Mater., 2012, vol. 67(10), pp. 846–4910.1016/j.scriptamat.2012.08.007 ↗
46. C. Garcia-Mateo, J.A. Jimenez, H.W. Yen, M.K. Miller, L. Morales-Rivas, M. Kuntz, S.P. Ringer, J.R. Yang, F.G. Caballero: Acta. Mater. , 2015, vol. 91, pp. 162–7310.1016/j.actamat.2015.03.018 ↗