Differential role of nanoscaled oxide dispersoids (Y2O3 vs Al2O3) in the high-temperature structural stability of NiCr alloys
Source abstract
Abstract
The effect of nanoscaled dispersoids in contributing to the high-temperature stability of nanograined NiCr alloys has been studied. Nanoscale yttria dispersoids were far more effective in contributing to the retention of a fine-grained microstructure in NiCr alloys (via the electron beam-physical vapor deposition (EB-PVD) route) as compared to the alumina particles. The fine yttria particles (<20 nm) shared a common orientation relationship with the matrix and exerted a Zener pinning force to inhibit rapid grain growth at elevated temperatures. Coarsening of yttria took place by diffusion of the metallic species through the NiCr matrix and was marginal compared to the alumina particles, which underwent a hierarchy of phase transformations (γ(spinel)→δ→α) as an outcome of coarsening. Phase selection at the nanoscale has been examined on the basis of free energies of formation of the metastable vs stable phases at the respective size ranges. The main factor responsible for the differential role of coarsening between the two types of dispersoids has been attributed to their relative free energies of formation, at these elevated temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. J.S. Benjamin: Metall. Trans., 1970, vol. 1 pp. 2943–51.10.1007/BF03037835 ↗
2. F.G. Wilson, B.R. Knott, and C.D. Desforges: Metall. Trans. A, 1978, vol. 9, pp. 275–82.10.1007/BF02646711 ↗
3. J.S. Benjamin and M.J. Bomford: Metall. Trans., 1974, vol. 5, pp. 615–21.10.1007/BF02644657 ↗
4. J.D. Whittenberger: Metall. Trans. A, 1984, vol. 5, pp. 1753–62.10.1007/BF02666358 ↗
5. R.C. Benn and S.K. Kang: Superalloys 1984, TMS-AIME, Warrendale, PA, 1984, pp. 319–26.
6. J.J. Stephens and W.D. Nix: Metall. Trans. A, 1986, vol. 17, pp. 281–93.10.1007/BF02643904 ↗
7. J. Rosler and E. Artz: Acta Metall., 1990, vol. 38, pp. 671–83.10.1016/0956-7151(90)90223-4 ↗
8. M. Heilmaier and B. Reppich: Metall. Mater. Trans. A, 1996, vol. 27, pp. 3861–70.10.1007/BF02595635 ↗
9. R. Joos and E. Artz: Z. Metallkd., 1998, vol. 89, pp. 653–60.
10. H.S. Ko, K.W. Paik, L.J. Park, Y.G. Kim, and J.H. Tundermann: J. Mater. Sci., 1998, vol. 33, pp. 3361–70.10.1023/A:1013293515482 ↗
11. V.C. Nardone and J.K. Tien: Scripta Metall., 1983, vol. 17, pp. 467–70.10.1016/0036-9748(83)90333-2 ↗
12. D.J. Srolovitz, M.J. Luton, R. Petkovik-Luton, D.M. Barnett, and W.D. Nix: Acta Metall., 1984, vol. 32, pp. 1079–88.10.1016/0001-6160(84)90011-7 ↗
13. R.S. Herrick, J.R. Weertman, R. Petkovik-Luton, and M.G. Luton: Scripta Metall., 1988, vol. 22, pp. 1879–84.10.1016/S0036-9748(88)80230-8 ↗
14. J. Rosler and E. Artz: Acta Metall., 1988, vol. 36, pp. 1043–51.10.1016/0001-6160(88)90158-7 ↗
15. R. Behr, J. Mayer, and E. Artz: Intermetallics, 1999, vol. 7, pp. 423–36.10.1016/S0966-9795(98)00108-3 ↗
16. D. Haussler, B. Reppich, M. Bartsch, and U. Messerschmidt: Mater. Sci. Eng. A., 2001, vols 309–10, pp. 500–04.10.1016/S0921-5093(00)01642-7 ↗
17. D. Haussler, M. Bartsch, U. Messerschmidt, and B. Reppich: Acta Mater., 2001, vol. 49, pp. 3649–57.10.1016/S1359-6454(01)00285-3 ↗
18. B.A. Wilcox and A.H. Clauer: Acta Metall., 1972, vol. 20, pp. 743–57.10.1016/0001-6160(72)90103-4 ↗
19. E. Artz and R.F. Singer: Superalloys 1984, TMS-AIME, Warrendale, PA, 1984, pp. 367–76.
20. J.J. Stephens and W.D. Nix: Metall. Trans. A, 1985, vol. 16, pp. 1307–24.10.1007/BF02670335 ↗
21. D.M. Elzey and E. Artz: in Superalloys 1988, S. Reichman, D.N. Duhl, G. Maurer, S. Antolovich, and C. Lund, eds., TMS-AIME, Warrendale, PA, 1988, pp. 595–604.
22. B. De Mestral, G. Eggeler, and H.J. Klam, Metall. Mater. Trans. A, 1996, vol. 27, pp. 879–90.10.1007/BF02649755 ↗
23. L.J. Park, Y.G. Kim, R.M. Haeberle, and A.S. Watwe, J. Mater. Sci. Lett., 1996, vol. 15, pp. 93–95.10.1007/BF00291435 ↗
24. Y. Estrin, H. Heilmaier, and G. Drew: Mater. Sci. Eng., A. 1999, vol. 272, pp. 163–73.10.1016/S0921-5093(99)00455-4 ↗
25. R.W. Lund and W.D. Nix: Acta Metall., 1976, vol. 24, pp. 469–81.10.1016/0001-6160(76)90068-7 ↗
26. R.D. Kane and L.J. Ebert: Metall. Trans., 1974, vol. 5, pp. 615–23.10.1007/BF02644657 ↗
27. C.G. Oca, M.A. Munoz Morris, and D.G. Morris: Intermetallics, 2003, vol. 11, pp. 425–34.10.1016/S0966-9795(03)00017-7 ↗
28. G.B. Schaffer, M.H. Loretto, R.E. Smallman., and J.W. Brooks: Acta Metall., 1989, vol. 37, pp. 2551–58.10.1016/0001-6160(89)90053-9 ↗
29. H.H. Fukubayashi: Proc. Int. Thermal Spray Conf., Osaka, Japan. May 2004.
30. M. Oksa, E. Turunen and T. Varis: Proc. Int. Thermal Spray Conf., Osaka, Japan, May 2004.
31. D. Srinivasan and P.R. Subramanian: J. Mater. Res., 2007, in press.
32. C. Zener: Private communication to C.S. Smith: Trans. Am. Inst. Min. Metall. Eng., 1949, vol. 175, pp. 15–22.
33. C.Z. Wagner: Z. Elektrochem., 1961, vol. 65, pp. 581–83.
34. J.M. Lifschitz and V.V. Slyozov: Phys. Chem. Solids, 1961, vol. 19, p. 35.10.1016/0022-3697(61)90054-3 ↗
35. P.K. Footner and C.B. Alcock: Metall. Trans., 1972, vol. 3, pp. 2633–37.10.1007/BF02644239 ↗
36. S.K. Battacharyya and K.C. Russell: Metall. Trans. A, 1976, vol. 7, pp. 453–62.10.1007/BF02642843 ↗
37. D.M. Schwartz and B. Ralph: Philos. Mag., 1969, vol. 19, pp. 1069–74.10.1080/14786436908225871 ↗
38. A. Youle, D.M. Schwartz, and B. Ralph: Met. Sci. J., 1971, vol. 5, pp. 131–34.10.1016/0036-9748(71)90044-5 ↗
39. V. Jayaram and C.G. Levi: Acta Metall., 1989, vol. 37, pp. 569–78.10.1016/0001-6160(89)90240-X ↗
40. C.G. Levi, V. Jayaram, J.J. Valencia, and R.J. Mehrabian: J. Mater. Res., 1988, vol. 3, pp. 969–83.10.1557/JMR.1988.0969 ↗
41. Smithells Metals Reference Book, E.A. Brandes and G.B. Brook, eds., 1998, pp. 13(12).
42. O. Kubaschewski and C.B. Alcock: Metallurgical Thermochemistry. Pergamon Press, Oxford, 1979, p. 378.