journal article·2015-10

Ignition Desensitization of PBX via Aluminization

Seokpum Kim, Yasuyuki Horie, Min Zhou

Publisher page

Abstract

The ignition behavior of aluminized HMX/Estane PBX under impact loading is analyzed through meso-scale simulations which account for constituent elasticity, viscoelasticity, elasto-viscoplasticity, fracture, internal contact, frictional heating, and heat conduction. The analyses involve explicit tracking of hotspot development and focuses on the probability of ignition, accounting for stochastic variations in microstructures which have HMX grain sizes ranging from 50 to 400 μm, binder-grain bonding strength of 35 MPa, and binder-grain interface bonding energy on the order of 81 J/m2. For the microstructure configuration studied, it is found that aluminization with particles 50 μm in diameter delays the initiation of chemical reaction in the material. The mean time to ignition (t50) for cases with 6 to 18 pct Al by volume is 1 to 1.7 μs longer (24 to 60 pct delay) as compared to that for the corresponding unaluminized PBX. To understand the mechanisms leading to the ignition delay, the differences in overall internal stresses, dissipations due to fracture and inelasticity, and hotspot field characteristics are quantified.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Energetic Materials and Combustion · Thermal and Kinetic Analysis · Combustion and Detonation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. P. P. Vadhe, R. B. Pawar, R. K. Sinha, S. N. Asthana, and A. S. Rao: Combust. Explos. Shock Waves, vol. 44, pp. 461–77, 2008.10.1007/s10573-008-0073-2 ↗
2. Y. Horie: in Personal Communication with J. Leathy of Leathy Consulting, J. Leathy of Leathy Consulting ed.
3. G. Antić and V. Džingalašević: Sci. Tech. Rev., vol. 56, pp. 52–58, 2006.
4. V. Prakash, V. K. Phadke, R. K. Sinha, and H. Singh: Def. Sci. J., vol. 54, pp. 475–82, 2004.10.14429/dsj.54.2061 ↗
5. M. Radwan: in 32nd Int’l Annual Conference of ICT, Karlsruhe, Germany, p. 44, 2001.
6. A. Barua, Y. Horie, and M. Zhou: J. Appl. Phys., vol. 111, 054902, 2012.10.1063/1.3688350 ↗
7. A. Barua, Y. Horie, and M. Zhou: Proc. R Soc. a-Math. Phys. Eng. Sci., vol. 468, pp. 3725–44, 2012.10.1098/rspa.2012.0279 ↗
8. A. Barua, S. Kim, Y. Horie, and M. Zhou: J. Appl. Phys., vol. 113, 064906, 2013.10.1063/1.4792001 ↗
9. A. Barua, S. Kim, Y. Horie, and M. Zhou: J. Appl. Phys., vol. 113, 184907, 2013.10.1063/1.4804251 ↗
10. A. Barua and M. Zhou: Modell. Simul. Mater. Sci. Eng., vol. 19, 055001, 2011.10.1088/0965-0393/19/5/055001 ↗
11. W. A. Trzcinski, S. Cudzilo, and L. Szymanczyk: Propellants Explos. Pyrotech., vol. 32, pp. 392–400, 2007.10.1002/prep.200700201 ↗
12. M. F. Gogulya, A. Y. Dolgoborodov, and M. A. Brazhnikov: Chem. Phys. Rep., vol. 17, pp. 51–54, 1998.
13. A. S. Kumar, V. B. Rao, R. K. Sinha, and A. S. Rao: Propellants Explos., Pyrotech., vol. 35, pp. 359–64, 2010.10.1002/prep.200800048 ↗
14. S. Kim, A. Barua, Y. Horie, and M. Zhou: J. Appl. Phys., vol. 115, 174902, 2014.10.1063/1.4874915 ↗
15. Y. L. Zhu, H. Huang, H. Ren, and Q. J. Jiao: J. Energ. Mater., vol. 31, pp. 178–91, 2013.10.1080/07370652.2012.688788 ↗
16. A. M. Grishkin, L. V. Dubnov, V. Y. Davidov, Y. A. Levshina, and T. N. Mikhailova: Combust. Explos. Shock Waves, vol. 29, pp. 239–45, 1993.10.1007/BF00755887 ↗
17. C. G. Rumchik and J. L. Jordan: AIP Conf. Proc., vol. 955, pp. 795–98, 2007.
18. D. J. Benson and P. Conley: Modell. Simul. Mater. Sci. Eng., vol. 7, pp. 333–54, 1999.10.1088/0965-0393/7/3/304 ↗
19. M. Zhou, A. Needleman, and R. J. Clifton: J. Mech. Phys. Solids, vol. 42, pp. 423–58, 1994.10.1016/0022-5096(94)90026-4 ↗
20. N.S. Brar, V.S. Joshi, and B.W. Harris: Shock Compress. Condens. Matter, Pts 1 and 2, 2009, vol. 1195, pp. 945–48.
21. J. Liu, M. K. Chaudhury, D. H. Berry, J. E. Seebergh, J. H. Osborne, and K. Y. Blohowiak: J. Adhes. Sci. Technol., vol. 20, pp. 277–305, 2006.10.1163/156856106776381811 ↗
22. J. Schultz, A. Carré, and C. Mazeau: Int. J. Adhes. Adhes., vol. 4, pp. 163–68, 1984.10.1016/0143-7496(84)90024-1 ↗
23. V. Sundararaman and S.K. Sitaraman: J. Electron. Packag., vol. 121, pp. 275–81, 1999.10.1115/1.2793852 ↗
24. C. M. Tarver, S. K. Chidester, and A. L. Nichols: J. Phys. Chem., vol. 100, pp. 5794–99, 1996.10.1021/jp953123s ↗
25. T. L. J. John F. Moxnes, Erik Unneberg: Adv. Stud. Theor. Phys., vol. 7, pp. 1051–69, 2013.10.12988/astp.2013.39103 ↗
26. Y. Li and M. Zhou: J. Mech. Phys. Solids, vol. 61, pp. 472–88, 2013.10.1016/j.jmps.2012.09.013 ↗
27. K. Terao: Irreversible Phenomena: Ignitions, Combustion and Detonation Waves (Chap. 3), Springer, New York, 2007.
28. M. F. Gogulya, M. N. Makhov, A. Y. Dolgoborodov, M. A. Brazhnikov, V. I. Arkhipov, and V. G. Shchetinin: Combust. Explos. Shock Waves, vol. 40, pp. 445–57, 2004.10.1023/B:CESW.0000033568.39812.2c ↗
29. L. Orth-Farrell and H. Krier: Combust. Sci. Technol., vol. 161, pp. 69–88, 2000.10.1080/00102200008935812 ↗
30. S. Chakravarthy, K. A. Gonthier, and R. Panchadhara: Modell. Simul. Mater. Sci. Eng., vol. 21, 055016, 2013.10.1088/0965-0393/21/5/055016 ↗
31. J. K. Dienes, Q. H. Zuo, and J. D. Kershner: J. Mech. Phys. Solids, vol. 54, pp. 1237–75, 2006.10.1016/j.jmps.2005.12.001 ↗