journal article·2015-03

The Influence of ZrO2 Concentration in an Yttria-Based Face Coat for Investment Casting a Ti-45Al-2Mn-2Nb-0.2TiB Alloy Using a Sessile Drop Method

Xu Cheng, Chen Yuan, Stuart Blackburn, Paul A. Withey

Publisher page

Abstract

Investment casting is widely used to cast near-net shape components, reducing material waste and process cost. Due to the high reactivity of titanium and its alloys, in order to reduce the interaction between the mold and molten titanium, very costly materials are used in the mold face coat. In order to reduce the material cost while maintaining the chemical inertness of the face coat, ZrO2 was added into an yttria-based face coat in different concentrations in this study. The face coat properties of the different systems were analyzed using dilatometry and XRD. The chemical inertness of the different face coat systems were tested using a sessile drop test using a Ti-45Al-2Mn-2Nb-0.2TiB alloy, and the interactions between the face coat and the alloy were analyzed by the interfacial microstructures, contact angle, and hardness changes. The results showed that small amounts of ZrO2 can be added into yttria without changing the chemical inertness of the face coat. High amounts of ZrO2 in the face coat can interact with TiAl alloy to form different interaction products. Meanwhile, both Y2O3 and ZrO2 filler materials were observed to dissolve in molten TiAl during the sessile drop test.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. X.H.Wu: Intermetallics, 2006, vol.14, pp.1114-22.10.1016/j.intermet.2005.10.019 ↗
2. R. Saha, T. Nandy, R. Misra and K. Jacob: Bull. Mater. Sci., 1989, vol.12, pp.481-93.10.1007/BF02744918 ↗
3. R. Saha, T. Nandy, R. Misra and K. Jacob: Metall. Mater. Trans. B, 1990, vol.21B, pp. 559-66.10.1007/BF02667869 ↗
4. M. Lamirand, J. Bonnentien, S. Guérin, G. Ferrière and J. Chevalier: Metall. Mater. Trans. A, 2006, vol.37A, pp.2369-78.10.1007/BF02586211 ↗
5. R. Horton: US Patent No. 4947927, 1990.
6. J. Barbosa, H. Puga, C. S. Ribeiro, O.M.N.D. Teodoro and A.C. Monteiro: Int. J. Cast Met. Res., 2006, vol.19, pp.331-38.10.1179/136404606X163497 ↗
7. J. Barbosa, C.S. Ribeiro and A.C. Monteiro: Intermetallics, 2007, vol.15, pp.945-55.10.1016/j.intermet.2006.11.004 ↗
8. J.P. Kuang, R.A. Harding, and J. Campbell: Int. J. Cast Met. Res., 2001, vol. 13, pp. 277–92.10.1080/13640461.2001.11819409 ↗
9. E.S. Lassow and P.R. Johnson: US Patent No. 4703806, 1987.
10. Yasrebi, M., Ziomek-Moroz, M., Kemp, W.,Sturgis, D.H: J. Am. Ceram. Soc.,1996, vol.79, pp.1223-27.10.1111/j.1151-2916.1996.tb08576.x ↗
11. Cheng, X., Yuan, C., Blackburn, S., Withey. P.A. (2014) J. Eur. Ceram. Soc., vol 34, pp. 3061-68.10.1016/j.jeurceramsoc.2014.03.005 ↗
12. M. Pourbaix, Atlas of Chemical Equilibria, Pergamon Press, London, U.K., 1964.
13. A. Kostov and B. Friedrich: Comput. Mater. Sci., 2006, vol.38, pp.374-85.10.1016/j.commatsci.2006.03.006 ↗
14. M.-G. Kim, S.-Y. Sung and Y.-J. Kim: Mater. Trans., 2004, vol.45, pp.536–41.10.2320/matertrans.45.536 ↗
15. M.-G. Kim and Y.-J. Kim: Met. Mater. Int., 2002, vol.8, pp.289-93.10.1007/BF03186098 ↗
16. M. Yasrebi and W. Kemp: US Patent No. 5464797, 1995.
17. M. Yasrebi, M.E. Springgate, D.G. Nikolas, W. Kemp, D.H. Sturgis and J.M. McCarthy: J. Am. Ceram. Soc., 1997, vol.80, pp.1615-18.10.1111/j.1151-2916.1997.tb03028.x ↗
18. X. Cheng, X.D. Sun, C. Yuan, N.R. Green and P.A. Withey: Intermetallics, 2012, vol.29, pp.61-69.10.1016/j.intermet.2012.05.005 ↗
19. N. Eustathopoulos: Acta Mater., 1998, vol.46, pp.2319-27.
20. A. Contreras: J. Colloid Metal/Shell Interface Sci., 2007, vol. 311, pp. 159-70.10.1016/j.jcis.2007.02.041 ↗
21. A. Contreras, E. Bedolla and R. Pérez: Acta Mater., 2004, vol.52, pp.985-94.10.1016/j.actamat.2003.10.034 ↗
22. A. Contreras, V.H. López and E. Bedolla: Scripta Mater., 2004, vol.51, pp.249-53.10.1016/j.scriptamat.2004.04.007 ↗
23. Cheng, X., Yuan, C., Green, N.R., Withey, P.A.: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 888-98.10.1007/s11661-012-1455-3 ↗
24. B.S. Li, A.-H. Liu, H. Nan, W.-S. Bi, J.-J. Guo and H.-Z. Fu: Trans. Nonferrous Met. Soc. China, 2008, vol.18, pp.518-22.10.1016/S1003-6326(08)60091-6 ↗
25. R. Cui, M. Gao, H. Zhang and S. Gong: J. Mater. Process. Technol., 2010, vol. 210, pp. 1190-96.10.1016/j.jmatprotec.2010.03.003 ↗
26. X.F. Ding, J.P. Lin, L.Q. Zhang, Y.Q. Su and G.L. Chen: Acta Mater., 2012, vol.60, pp.498-506.10.1016/j.actamat.2011.10.009 ↗
27. Kim, M.-G. and Y.-J. Kim (2002) Met. Mater. Int., vol 8, pp. 289-93.10.1007/BF03186098 ↗
28. R.A. Swalin, Thermodynamics of Solids, 2 ed., Wiley, New York, 1972.
29. J. Zollinger, J. Lapin, D. Daloz and H. Combeau: Intermetallics, 2007, vol.15, pp.1343-50.10.1016/j.intermet.2007.04.002 ↗
30. S. Becker, A. Rahmel, M. Schorr and M. Schütze: Oxid. Met., 1992, vol.38, pp.425-64.10.1007/BF00665663 ↗
31. Y. Zhishang, R. Libun, Z. Fuzhong, Z. Rongzhang and Y. Zongsen: J. Univ. Sci. Technol., 1995, vol. 6, pp. 512–16.
32. J. Lapin and Z. Gabalcová: Intermetallics, 2011, vol.19, pp.797-804.10.1016/j.intermet.2010.11.021 ↗
33. F. Gomes, H. Puga, J. Barbosa and C. Ribeiro: J. Mater. Sci., 2011, vol.46, pp. 4922-36.10.1007/s10853-011-5405-z ↗
34. Q. Jia, Y. Y. Cui and R. Yang: Int. J. Cast Met. Res., 2004, vol.17, pp.23-28.10.1179/136404604225014800 ↗