journal article·2023-06Open access

Influence of Grain Size and Volume Fraction of η/δ Precipitates on the Dwell Fatigue Crack Propagation Rate and Creep Resistance of the Nickel-Base Superalloy ATI 718Plus

A. Kirchmayer, M. Pröbstle, D. Huenert, S. Neumeier, M. Göken

Abstract

Abstract Recently, it was found that the orientation of theη/δplates in the Ni-base superalloys ATI 718Plus has a huge impact on the fatigue crack propagation behavior (Huenertet al.in Superalloys pp.781–792, 2016). However, the targeted alignment ofη/δprecipitates in components with complex geometry can be challenging in certain applications. Therefore, the effect of other microstructural features of ATI 718Plus, which are easier to manipulate, is tested with respect to their fatigue crack propagation behavior and creep strength. The grain size, theγ′ precipitate size, as well as theγ′ andη/δvolume fraction are varied by applying different heat treatments. An increase in theη/δvolume fraction as well as theγ′ volume fraction and precipitate size enhanced the crack growth resistance, but worsened the creep properties. On the contrary, increasing the grain size leads to better creep properties and better fatigue crack growth resistance. The impact of the different microstructures investigated in this study on the mechanical properties is smaller compared to microstructures with strongly alignedη/δplates. These results enable to design the desired microstructures that meet the particular demands of the given application regarding crack propagation and creep resistance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. D. Huenert, M. Proebstle, A. Casanova, R. Schluetter, R. Schluetter, R. Krakow, R. Krakow, M. Buescher, P. Randelzhofer, A. Evans, K. Loehnert, T. Witulski, S. Neumeier, and C. Rae: in Superalloys 2016, Mark Hardy, Eric Huron, Uwe Glatzel, Brian Griffin, Beth Lewis, Cathie Rae, Venkat Seetharaman, and Sammy Tin, eds., John Wiley & Sons, Inc., Hoboken, NJ, USA, 2016, pp. 781–92.10.1002/9781119075646.ch84 ↗
2. L. Viskari, Y. Cao, M. Norell, G. Sjöberg, and K. Stiller: Mater. Sci. Eng., A, 2011, vol. 528, pp. 2570–580.10.1016/j.msea.2010.11.080 ↗
3. K. Löhnert and F. Pyczak,: Superalloys, 2010.
4. G.A. Zickler, R. Schnitzer, R. Radis, R. Hochfellner, R. Schweins, M. Stockinger, and H. Leitner: Mater. Sci. Eng. A, 2009, vol. 523, pp. 295–303.10.1016/j.msea.2009.06.014 ↗
5. R.M. Kearsey, J. Tsang, S. Oppenheimer, and E. McDevitt: JOM, 2012, vol. 64, pp. 241–51.10.1007/s11837-012-0242-3 ↗
6. W.-D. Cao: Superalloys, 2005, vol. 718, pp. 166–77.
7. A. Kruk, G. Cempura, S. Lech, and A. Czyrska -Filemonowicz: Archives of Metallurgy and Materials, 2016, vol. 61, pp. 535–42.
8. A. Casanova, N. Martín-Piris, M. Hardy, and C. Rae: MATEC Web of Conferences, 2014, vol. 14, p. 09003.10.1051/matecconf/20141409003 ↗
9. B. Hassan and J. Corney: Mater. Sci. Technol., 2017, vol. 33, pp. 1879–889.10.1080/02670836.2017.1333222 ↗
10. E.J. Pickering, H. Mathur, A. Bhowmik, O.M.D.M. Messé, J.S. Barnard, M.C. Hardy, R. Krakow, K. Loehnert, H.J. Stone, and C.M.F. Rae: Acta Mater., 2012, vol. 60, pp. 2757–769.10.1016/j.actamat.2012.01.042 ↗
11. Robert Krakow, Duncan N. Johnstone, Alexander S. Eggeman, Daniela Hünert, Mark C. Hardy, Catherine M. F. Rae, and Paul A. Midgley: Acta Materialia, 2017, vol. 130, pp. 271–80.10.1016/j.actamat.2017.03.038 ↗
12. Daniel Hausmann, Andreas Förner, Martin Pröbstle, Daniela Hünert, Peter Felfer, Mathias Göken, and Steffen Neumeier: Advanced Engineering Materials, 2021, p. 2100558.10.1002/adem.202100558 ↗
13. Wei-Di Cao and Richard L. Kennedy: ATI Allvac, 2006.
14. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat Methods, 2012, vol. 9, pp. 671–75.10.1038/nmeth.2089 ↗
15. I. Arganda-Carreras, V. Kaynig, C. Rueden, K.W. Eliceiri, J. Schindelin, A. Cardona, and H. Sebastian Seung: Bioinformatics, 2017, vol. 33, pp. 2424–26.
16. D. Blavette, P. Caron, and T. Khan: in Superalloys: Sixth International Symposium. TMS, 1988, vol. 1988, pp. 305–14.
17. Andreas Kirchmayer, Hao Lyu, Martin Pröbstle, Frédéric Houllé, Andreas Förner, Daniela Huenert, Mathias Göken, Peter Johann Felfer, Erik Bitzek, and Steffen Neumeier: Advanced Engineering Materials, 2020, p. 2000149.10.1002/adem.202000149 ↗
18. ASTM E647-13a: ASTM Int., 2014, vol. 13, pp. 1–50.
19. N.C. Eurich and P.D. Bristowe: Scr. Mater., 2014, vol. 77, pp. 37–40.10.1016/j.scriptamat.2014.01.012 ↗
20. F. Long, Y.S. Yoo, C.Y. Jo, S.M. Seo, Y.S. Song, T. Jin, and Z.Q. Hu: Mater. Sci. Eng. A, 2009, vol. 527, pp. 361–69.10.1016/j.msea.2009.09.016 ↗
21. X. Liu, S. Rangararan, E. Barbero, K.-M. Chang, W.-D. Cao, R. Kennedy, and T. Cameiro: Superalloys 718, 625, 706 and Various Derivatives. TMS, 2001, vol. 2001, pp. 283–90.
22. S. Li, J. Yang, J. Zhuang, Q. Deng, J. Du, X. Xie, B. Li, Z. Xu, Z. Cao, Z. Su, and C. Jiang: in Superalloys 718, 625, 706 and Various Derivatives. TMS, 1994, vol. 1994, pp. 545–55.
23. K. Sadananda and P. Shahinian: Metall. Trans. A, 1977, vol. 8, pp. 439–49.10.1007/BF02661754 ↗
24. M. Hörnqvist, T. Månsson, and D. Gustafsson: Procedia Eng., 2011, vol. 10, pp. 147–52.10.1016/j.proeng.2011.04.027 ↗
25. W.J. Evans, J.P. Jones, and S. Williams: Int. J. Fatigue, 2005, vol. 27, pp. 1473–484.10.1016/j.ijfatigue.2005.06.029 ↗
26. Timothy P Gabb, Jack Telesman, Anita Garg, Peter Lin, Virgil Provenzano, Robert Heard, and Herbert M Miller: in 7th International Symposium on Superalloy 718 and Derivatives, 2010, p. 26.
27. K.-M. Chang, M.F. Henry, and M.G. Benz: JOM, 1990, vol. 42, pp. 29–35.10.1007/BF03220467 ↗
28. J.P. Pédron and A. Pineau: Mater. Sci. Eng., 1982, vol. 56, pp. 143–56.10.1016/0025-5416(82)90167-7 ↗
29. Lee A James: Eng. Fract. Mech., 1986, vol. 25, pp. 305–14.10.1117/12.7973781 ↗
30. P Lin, V Provenzano, G Palumbo, T Gabb, and J Telesman: 7th International Symposium on Superalloy 718 and Derivates, 2010, pp. 243–53.10.1002/9781118495223.ch18 ↗
31. X. Liu, B. Kang, and K.-M. Chang: Mater. Sci. Eng. A, 2003, vol. 340, pp. 8–14.10.1016/S0921-5093(02)00074-6 ↗
32. H.Y. Li, J.F. Sun, M.C. Hardy, H.E. Evans, S.J. Williams, T.J.A. Doel, and P. Bowen: Acta Mater., 2015, vol. 90, pp. 355–69.10.1016/j.actamat.2015.02.023 ↗
33. Y.J. Oh, J.H. Hong, and S.W. Nam: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1761–75.10.1007/s11661-998-0327-3 ↗
34. R.C. Reed: The Superalloys: Fundamentals and Applications, 1st ed. Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
35. I.S. Kim, B.G. Choi, H.U. Hong, J. Do, and C.Y. Jo: Mater. Sci. Eng. A, 2014, vol. 593, pp. 55–63.10.1016/j.msea.2013.11.031 ↗