Elemental Inter-diffusions for the Transformation of δ/M23C6/γ Phases During Heat Treatment Processes in Heavy Gage 316H-Type Austenitic Stainless Steel
Source abstract
Abstract
The δ-ferrite and M23C6 carbide are easy to form and usually have detrimental effects on service performance in heavy gage 316H-type austenitic stainless steel. In order to clarify their transformation behavior in the austenite matrix, elemental inter-diffusions between δ/M23C6/γ phases were investigated by the in situ observation of heating and cooling processes and the concentration analysis of C, Cr, Mo and Ni elements. The M23C6-type carbides were found to precipitate preferentially along the interface between austenite and retained δ-ferrite with cooling rate of less than 100 °C/s, where the Mo, Cr and C elements were measured to be enriched and Ni element was depleted. The decomposition of M23C6 during heating at above 950 °C, on the other hand, could enhance the enrichments of Mo and Cr on the δ-ferrite side, and thus increase the difficulty of δ-ferrite dissolution. The nano-indentation tests indicated that nano-hardness values were increased sequentially for austenite, δ-ferrite and M23C6 phases with the increase of Mo, Cr and C concentrations among them. Moreover, the relative concentration difference of Mo and Cr between two phases could easily cause electrochemical corrosion, leading to preferentially corrosion in the phase with lower Mo and Cr concentration. Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. A. Kazumi, D. Philippe, H.Y. Yang, P.G. Jean, and U. Nariaki: Prog. Nucl. Energ., 2014, vol. 77, pp. 247–65.10.1016/j.pnucene.2014.05.008 ↗
2. Q.A. Wang, B. Long, X.T. Wang, Y.C. Fang, D.H. Zhang, and P.D. Zhou: J. Iron Steel Res., 2014, vol. 26, pp. 1–6.
3. S.G. Kalyakin, F.A. Kozlov, A.P. Sorokin, G.P. Bogoslovskaya, A.P. Ivanov, M.A. Konovalov, A.V. Morozov, and VYu. Stogov: Nucl. Eng. Technol., 2016, vol. 2, pp. 282–86.10.1016/j.nucet.2016.11.016 ↗
4. X. Li, F. Gao, J.H. Jiao, G.M. Cao, Y. Wang, Z.Y. Liu, Mater. Charact., 2021, vol. 174, pp. 111029.10.1016/j.matchar.2021.111029 ↗
5. J.W. Fu and Y.S. Yang: Mater. Lett., 2013, vol. 93, pp. 18–20.10.1016/j.matlet.2012.11.035 ↗
6. T.G. Gooch: W. J., 1980, vol. 59, pp. 233s–41s.
7. F. Shigeo F, O. Toshimitsu, U. Takateru, K. Wilfried, ISIJ Int., 2000, vol. 40, pp. 677–84.10.2355/isijinternational.40.677 ↗
8. J. Qian, C. Chen, H. Yu, F. Liu, Y. Yang, and Z. Yang: Corros. Sci., 2016, vol. 111, pp. 352–61.10.1016/j.corsci.2016.05.021 ↗
9. J. Verma and R.V. Taiwade: J. Manuf. Process, 2016, vol. 24, pp. 1–10.10.1016/j.jmapro.2016.07.001 ↗
10. A.B. Rhouma, T. Amadou, H. Sidhom, and C. Braham: J. Alloys Compd., 2017, vol. 708, pp. 871–86.10.1016/j.jallcom.2017.02.273 ↗
11. H. Inoue and T. Koseki: Acta Mater., 2017, vol. 124, pp. 430–36.10.1016/j.actamat.2016.11.030 ↗
12. T. Koseki and M.C. Flemings: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3226–40.10.1007/BF02663873 ↗
13. A.F. Padilha, C.F. Tavares, and M.A. Martorano: Mater. Sci. Forum, 2013, vol. 732, pp. 733–38.
14. H.M. Lee, J.S. Bae, and J.R. Soh: Mater. T. Jim, 2007, vol. 39, pp. 633–39.10.2320/matertrans1989.39.633 ↗
15. S.H. Kim, H.K. Moon, T. Kang, and C.S. Lee: Mater. Sci. Eng. A, 2003, vol. 356, pp. 390–98.10.1016/S0921-5093(03)00152-7 ↗
16. A. Spaccarotella, M.R. Ridolfi, G. Picht, and P.R. Scheller: Steel Res. Int., 2003, vol. 74, pp. 693–99.10.1002/srin.200300252 ↗
17. C. Chen and G. Cheng: Metall. Mater. Trans. B, 2017, vol. 48, pp. 2324–33.10.1007/s11663-017-1026-5 ↗
18. C.C. Hsieh and W. Wu: Rivista Italiana della Saldatura, 2014, vol. 66, pp. 361–81.
19. C.C. Hsieh, D.Y. Lin, and T.C. Chang: Mater. Sci. Eng. A, 2008, vol. 475, pp. 128–35.10.1016/j.msea.2007.04.028 ↗
20. Y. Zhao, W.N. Zhang, Z.Y. Liu, and G.D. Wang: Mater. Sci. Eng. A, 2017, vol. 702, pp. 279–88.10.1016/j.msea.2017.07.020 ↗
21. M. Kajihara, C.B. Lim, and M. Kikuchi: Acta Metall. Mater., 1993, vol. 41, pp. 2045–59.10.1016/0956-7151(93)90374-2 ↗
22. A.D. Warren, I.J. Griffiths, and F. Lewitt: J. Mater. Sci., 2018, vol. 53, pp. 6183–97.10.1007/s10853-017-1748-4 ↗
23. X.F. Zhang and Y. Komizo: Philt. Mag. Lett., 2011, vol. 91, pp. 491–97.10.1080/09500839.2011.587464 ↗
24. M. Kajihara and M. Kikuchi: Acta Metall. Mater., 1995, vol. 43, pp. 807–20.10.1016/0956-7151(94)00283-N ↗
25. M. Kajihara, C.B. Lim, and M. Kikuchi: ISIJ Int., 1993, vol. 33, pp. 498–507.10.2355/isijinternational.33.498 ↗
26. Y. Yang and J.T. Busby: J. Nucl. Mater., 2014, vol. 448, pp. 282–93.10.1016/j.jnucmat.2014.02.008 ↗
27. Y.S. Hao, J. Li, X. Li, W.C. Liu, G.M. Cao, C.G. Li, Z.Y. Liu, J. Mater. Process Tech., 2020, vol. 275, pp. 116326.10.1016/j.jmatprotec.2019.116326 ↗
28. Y. Zhao, X. Liu, X. Li, Y. Wang, W.N. Zhang, and Z.Y. Liu: J. Mater. Sci., 2018, vol. 53, pp. 824–36.10.1007/s10853-017-1516-5 ↗
29. J.S. Lee, I.S. Kim, and A. Kimura: J. Nucl. Sci. Technol., 2003, vol. 40, pp. 664–71.10.1080/18811248.2003.9715404 ↗
30. K.H. Lo, C.H. Shek, and J. Lai: Mater. Sci. Eng. R, 2009, vol. 65, pp. 39–104.10.1016/j.mser.2009.03.001 ↗
31. T.P.S. Gill, V. Sharkar, M.G. Pujar, and P. Rodriguez: Scr. Metal. Mater., 1995, vol. 32, pp. 1595–1600.10.1016/0956-716X(95)00242-N ↗
32. K. Guan, X. Xu, X. Hong, and Z. Wang: Nucl. Eng. Des., 2005, vol. 235, pp. 2485–94.10.1016/j.nucengdes.2005.06.006 ↗
33. T.H. Chen and J.R. Yang: Mater. Sci. Eng. A, 2001, vol. 311, pp. 28–41.10.1016/S0921-5093(01)00911-X ↗
34. J.T. Gow and O.E. Harder: Trans. Am. Soc. Met., 1942, vol. 30, pp. 855–935.
35. J. Lai and M. Meshkat: Met. Sci., 2013, vol. 12, pp. 415–20.10.1179/030634578790434061 ↗
36. M. Taneike, K. Sawada, and F. Abe: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1255–62.10.1007/s11661-004-0299-x ↗
37. S.C. Zhang, H.B. Li, Z.H. Jiang, B.B. Zhang, Z.X. Li, J.X. Wu, S.P. Fan, H. Feng, and H.C. Zhu: Mater. Charact., 2019, vol. 152, pp. 141–50.10.1016/j.matchar.2019.04.010 ↗
38. M. Terada, D.M. Escriba, I. Costa, E. Morris, and A.F. Padilha: Mater. Charact., 2008, vol. 59, pp. 663–68.10.1016/j.matchar.2007.05.017 ↗
39. M. Cabibbo: Mater. Sci. Eng. A, 2013, vol. 560, pp. 413–32.10.1016/j.msea.2012.09.086 ↗
40. F.R.N. Nabarro: Philos. Mag., 1977, vol. 35, pp. 613–22.10.1080/14786437708235994 ↗
41. Q. Lu, W. Xu, and S. Zwaag: Comput. Mater. Sci., 2014, vol. 84, pp. 198–205.10.1016/j.commatsci.2013.12.009 ↗
42. Y. Jang, J.N. Son, S.S. Kim, J. Lee, and B. Choi: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3431–38.10.1007/s11661-004-0179-4 ↗
43. Y. Jang, S. Kim, and J. Lee: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1229–36.10.1007/s11661-005-0215-z ↗
44. Q.L. Yong: Secondary Phases in Steels, Metallurgical Industry Press, Beijing, 2006, pp. 1–17.
45. S.X. Li, L. Li, S.R. Yu, R. Akid, and H.B. Xia: Corros. Sci., 2011, vol. 53, pp. 99–104.10.1016/j.corsci.2010.09.027 ↗
46. Y. Zhao, Y. Wang, Z. Zhu, and Z.Y. Liu: Steel Res. Int., 2018, vol. 89, p. 1800187.10.1002/srin.201800187 ↗