journal article·2022-07

Measuring and Modeling Microsegregation in High-Pressure Die Cast Mg–Al Alloys

Tracy D. Berman, Zhenjie Yao, Erin Deda, Larry Godlewski, Mei Li, John E. Allison

Publisher page

Abstract

This work provides a quantitative description of the microstructure and microsegregation behavior of high-pressure die-cast (HPDC) Mg–Al and Mg–Al–Mn alloys. Plate castings of these alloys were produced using Super Vacuum Die Casting. Electron probe microanalysis mapping demonstrates that the solute profiles are in good agreement with the Scheil solidification model at the plate interior but diverge from the Scheil model near the plate surface where the cooling rate is higher. A modified Scheil equation, which incorporates solidification front velocity-dependent partition coefficients (({k}_{ ext{v}})), provides a better description of both the microsegregation behavior and of the fraction of β-Mg17Al12 that forms during solidification. Agreement between the model and experimental results can be improved by considering the amount of externally solidified crystals that have been incorporated into the local microstructure. Integrated Computational Materials Engineering capabilities for HPDC Mg–Al and Mg–Al–Mn alloys will be improved by incorporating this modified Scheil relationship into solidification simulations to better predict how the Al solute is distributed throughout the casting.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. H. Gjestland and H. Westengen: Adv. Eng. Mater., 2007, vol. 9, pp. 769–76.10.1002/adem.200700168 ↗
2. M.J. Aziz and T. Kaplan: Acta Matall., 1988, vol. 36, pp. 2335–47.10.1016/0001-6160(88)90333-1 ↗
3. T. Pinomaa, A. Laukkanen, and N. Provatas: MRS Bull., 2020, vol. 45, pp. 910–15.10.1557/mrs.2020.274 ↗
4. T. Kraft, M. Rettenmayr, and H.E. Exner: Model. Simul. Mater. Sci. Eng., 1996, vol. 4, pp. 161–77.10.1088/0965-0393/4/2/004 ↗
5. X. Zheng, A.A. Luo, C. Zhang, J. Dong, and R.A. Waldo: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3239–48.10.1007/s11661-012-1159-8 ↗
6. M.I. Khan, A.O. Mostafa, M. Aljarrah, E. Essadiqi, and M. Medraj: J. Mater., 2014, vol. 2014, pp. 1–18.
7. C. Zhang, D. Ma, K.-S. Wu, H.-B. Cao, G.-P. Cao, S. Kou, Y.A. Chang, and X.-Y. Yan: Intermetallics, 2007, vol. 15, pp. 1395–1400.10.1016/j.intermet.2007.01.009 ↗
8. D. Mirković and R. Schmid-Fetzer: Metall. Mater. Trans. A, 2009, vol. 40, pp. 974–81.10.1007/s11661-009-9788-2 ↗
9. J.R. TerBush, N.D. Saddock, J.W. Jones, and T.M. Pollock: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2435–42.10.1007/s11661-010-0271-x ↗
10. M. Paliwal, D.H. Kang, E. Essadiqi, and I.H. Jung: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 3596–3608.10.1007/s11661-014-2288-z ↗
11. S. Liu, G. Yang, and W. Jie: Acta Metall. Sin. (Engl. Lett.), 2014, vol. 27, pp. 1134–43.10.1007/s40195-014-0151-2 ↗
12. P. Donnadieu, S. Benrhaiem, C. Tassin, F. Volpi, and J.J. Blandin: J. Alloys Compd., 2017, vol. 702, pp. 626–35.10.1016/j.jallcom.2017.01.294 ↗
13. J. Wang, J. Wang, and Z. Song: Rare Met Mater. Eng., 2017, vol. 46, pp. 12–16.10.1016/S1875-5372(17)30069-3 ↗
14. C. Zhang, J. Miao, S. Chen, F. Zhang, and A.A. Luo: J. Phase Equilibria Diffus., 2019, vol. 40, pp. 495–507.10.1007/s11669-019-00732-0 ↗
15. T.D. Berman, M. Li, and J.E. Allison: in Magnesium Technology 2017: Proc. TMS, N.R. Solanki, Kiran N., Orlov. Dmytro, Singh, Alok, Neelameggham, eds., Springer, Cham, 2017, pp. 73–78.
16. T.D. Berman, E. Deda, J. Miao, M. Li, and J.E. Allison: in Magnesium Technology 2016: Proc. TMS, A. Singh, K. Solanki, M.V. Manuel, and N.R. Neelameggham, eds., John Wiley & Sons, Ltd, Hoboken, New Jersey, 2016, pp. 47–51.10.1002/9781119274803.ch11 ↗
17. J. Lacaze, P. Benigni, and A. Howe: Adv. Eng. Mater., 2003, vol. 5, pp. 37–46.10.1002/adem.200390004 ↗
18. M. Ganesan, L. Thuinet, D. Dye, and P.D. Lee: Metall. Mater. Trans. B Process Metall. Mater. Process. Sci., 2007, vol. 38B, pp. 557–66.10.1007/s11663-007-9071-0 ↗
19. M.C. Flemings, D.R. Poirier, R. Barone, and H. Brody: J. Iron Steel Inst, 1970, vol. 208, pp. 371–81.
20. M.N. Gungor: Metall. Trans. A, 1989, vol. 20A, pp. 2529–33.10.1007/BF02666687 ↗
21. Z.-P. Guo, S.-M. Xiong, B.-C. Liu, M. Li, and J. Allison: Metall. Mater. Trans. A, 2008, vol. 39, pp. 2896–2905.10.1007/s11661-008-9640-0 ↗
22. Z.P. Guo, S.M. Xiong, B.C. Liu, M. Li, and J.E. Allison: Int. J. Cast Met. Res., 2011, vol. 24, pp. 151–57.10.1179/136404611X13001912813825 ↗
23. H. Meco and R.E. Napolitano: Mater. Sci. Forum, 2007, vol. 539–543, pp. 2810–15.10.4028/www.scientific.net/MSF.539-543.2810 ↗
24. M.J. Aziz: J. Appl. Phys., 1982, vol. 53, pp. 1158–68.10.1063/1.329867 ↗
25. H.I. Laukli: Ph.D Thesis, Norwegian University of Science and Technology, 2004.
26. E. Deda, T.D.T.D. Berman, and J.E. Allison: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 1999–2014.10.1007/s11661-017-3958-4 ↗
27. C. Labrecque, R. Angers, R. Tremblay, and D. Dubé: Can. Metall. Q., 1997, vol. 36, pp. 169–75.10.1179/cmq.1997.36.3.169 ↗
28. K. Pettersen, O. Lohne, and N. Ryum: Metall. Trans. A, 1990, vol. 21A, pp. 221–30.10.1007/BF02656439 ↗
29. C.H. Caceres, C.J. Davidson, J.R. Griffiths, and C.L. Newton: Mater. Sci. Eng. A, 2002, vol. 325, pp. 344–55.10.1016/S0921-5093(01)01467-8 ↗
30. S.J.B. Reed and J.V.P. Long: in 3rd Int Symp on X-ray Optics and X-ray Microanalysis, H.H. Pattee, V.E. Cosslett, and A. Engstrom, eds., Academic Press, New York, 1963, pp. 317–27.
31. T.M. Pollock, J.E. Allison, D.G. Backman, M.C. Boyce, M. Gersh, E.A. Holm, R. LeSar, M. Long, I. Powell, Adam C., J.J. Schirra, D. Demania Whitis, and C. Woodward: Integrated Computational Materials Engineering: A Transformational Discipline for Improved Competitiveness and National Security, The National Academies Press, Washington, DC, 2008.
32. J. Allison, M. Li, C. Wolverton, and X. Su: JOM, 2006, vol. 58, pp. 28–35.10.1007/s11837-006-0224-4 ↗
33. M. Carrard, M. Gremaud, M. Zimmermann, and W. Kurz: Acta Metall. Mater., 1992, vol. 40, pp. 983–96.10.1016/0956-7151(92)90076-Q ↗
34. M.J. Aziz and W.J. Boettinger: Acta Metall. Mater., 1994, vol. 42, pp. 527–37.10.1016/0956-7151(94)90507-X ↗
35. A. Monas, O. Shchyglo, S.J. Kim, C.D. Yim, D. Höche, and I. Steinbach: JOM, 2015, vol. 67, pp. 1805–11.10.1007/s11837-015-1418-4 ↗
36. Pierre Villars (Chief Editor), PAULING FILE in: Inorganic Solid Phases, SpringerMaterials (online database), Springer, Heidelberg
37. M.E. Glicksman: Principles of Solidification, 2011.10.1007/978-1-4419-7344-3 ↗
38. A.A. Luo: J. Magnes. Alloy., 2013, vol. 1, pp. 2–22.10.1016/j.jma.2013.02.002 ↗
39. H.D. Brody and M.C. Flemings: Trans. Metall. Soc. AIME, 1966, vol. 236, pp. 615–24.
40. T.W. Clyne and W. Kurz: Metall. Trans. A, 1981, vol. 12A, pp. 965–71.10.1007/BF02643477 ↗
41. W. Kurz, B. Giovanola, and R. Trivedi: Acta Metall., 1986, vol. 34, pp. 823–30.10.1016/0001-6160(86)90056-8 ↗
42. B. Giovanola and W. Kurz: Metall. Trans. A, 1990, vol. 21, pp. 260–63.10.1007/BF02656445 ↗
43. Z. Yao: Ph.D Thesis, University of Michigan, Ann Arbor, MI 2021.
44. Y.-J. Liang, X. Cheng, and H.-M. Wang: Acta Mater., 2016, vol. 118, pp. 17–27.10.1016/j.actamat.2016.07.008 ↗
45. C.M. Gourlay, H.I. Laukli, and a. K. Dahle: Metall. Mater. Trans. A, 2007, vol. 38, pp. 1833–44.10.1007/s11661-007-9243-1 ↗
46. S.G. Lee, G.R. Patel, and A.M. Gokhale: Mater. Charact., 2005, vol. 55, pp. 219–24.10.1016/j.matchar.2005.05.009 ↗
47. M.C. Flemings: Solidification Processing, McGraw-Hill, New York, NY, 1974.10.1007/BF02643923 ↗
48. J.P. Weiler, J.T. Wood, R.J. Klassen, R. Berkmortel, and G. Wang: Mater. Sci. Eng. A, 2006, vol. 419, pp. 297–305.10.1016/j.msea.2006.01.034 ↗
49. A.K. Dahle, S. Sannes, D.H. St. John, and H. Westengen: J. Light Met., 2001, vol. 1, pp. 99–103.10.1016/S1471-5317(01)00002-5 ↗