A Quantitative Study of Microsegregation in Aluminum–Copper Alloys
Source abstract
Abstract
This study quantitatively investigated the effects of a wide variety of solidification process conditions on the microsegregation behavior of Al–Cu binary and multi-component alloys. Quantitative measurements of microsegregation were conducted using electron probe micro-analysis (EPMA). The EPMA results systematically demonstrated the influences of solidification cooling rates and thermal gradients on the microsegregation behavior in these Al–Cu alloys. The effects of the cooling rate on the microstructure and volume fraction of eutectic phase were also quantitatively characterized. A comprehensive micro-model for microsegregation, which considers solid diffusion, non-equilibrium parameters, constitutional undercooling at the dendrite tip, and dendrite remelting during dendrite formation was applied to predict the microsegregation behavior over a wide range of cooling rates. The comprehensive micro-model is analytical, simple to implement and accurately predicts the microsegregation behavior in Al–Cu binary and multi-component alloys during both columnar and equiaxed dendritic solidification for a wide range of solidification conditions from laser surface remelting to near equilibrium conditions represented by equiaxed dendrites in thick cast sections.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. D.M. Stefanescu: Science and Engineering of Casting Solidification, 3rd ed. Springer, New York, 2015.10.1007/978-3-319-15693-4 ↗
2. J.A. Sarreal and G.J. Abbaschian: Metall. Trans. A, 1986, vol. 17, pp. 2063–73.10.1007/BF02645003 ↗
3. J.F. Grandfield, D.G. Eskin, and I.F. Bainbridge: Direct-Chill Casting of Light Alloys, Wiley, Hoboken, 2013.10.1002/9781118690734 ↗
4. Q. Du, D.G. Eskin, A. Jacot, and L. Katgerman: Acta Mater., 2007, vol. 55, pp. 1523–32.10.1016/j.actamat.2006.10.035 ↗
5. G. Kasperovich, T. Volkmann, L. Ratke, and D. Herlach: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1183–91.10.1007/s11661-008-9505-6 ↗
6. M. Ganesan, L. Thuinet, D. Dye, and P.D. Lee: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 557–66.10.1007/s11663-007-9071-0 ↗
7. T.D. Berman, Z. Yao, E. Deda, L. Godlewski, M. Li, and J.E. Allison: Metall. Mater. Trans. A, 2022.
8. T.D. Berman, M. Li, and J.E. Allison: Magnes. Technol., 2017, vol. 2017, pp. 73–78.
9. X. Yan, S. Chen, F. Xie, and Y.A. Chang: Acta Mater., 2002, vol. 50, pp. 2199–2207.10.1016/S1359-6454(01)00431-1 ↗
10. M. Ohno, M. Yamashita, and K. Matsuura: Int. J. Heat Mass Transf., 2019, vol. 132, p. 1004.10.1016/j.ijheatmasstransfer.2018.12.055 ↗
11. A. Mortensen: Metall. Trans. A, 1989, vol. 20, pp. 247–53.10.1007/BF02670250 ↗
12. V.R. Voller and C. Beckermann: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3016–19.10.1007/s11661-999-0141-6 ↗
13. V.R. Voller and C. Beckermann: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2183–89.10.1007/s11661-999-0030-z ↗
14. Y.M. Won and B.G. Thomas: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1755–67.10.1007/s11661-001-0152-4 ↗
15. R.-J. Su, R.A. Overfelt, and W.A. Jemian: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2375–81.10.1007/s11661-998-0113-2 ↗
16. I.L. Ferreira, C.A. Santos, A. Garcia, and V.R. Voller: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 285–97.10.1007/s11663-004-0030-8 ↗
17. M. Flemings, D. Poirier, R. Barone, and H.D. Brody: J. Iron Steel Inst. (Lond.), 1970, vol. 208, pp. 371–81.
18. M.N. Gungor: Metall. Trans. A, 1989, vol. 20, pp. 2529–33.10.1007/BF02666687 ↗
19. M. Ganesan, D. Dye, and P.D. Lee: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2191–2204.10.1007/s11661-005-0338-2 ↗
20. Z. Yao, W. Ren, and J.E. Allison: Available at Research Square with https://doi.org/10.21203/rs.3.rs-1002008/v1.10.21203/rs.3.rs-1002008/v1 ↗
21. Z. Yao, D. Montiel, K. Thornton, and J.E. Allison: Metall. Mater. Trans. A, 2022.
22. T.M. Pollock, J.E. Allison, and D.G. Backman: Integrated Computational Materials Engineering: A Transformational Discipline for Improved Competitiveness and National Security, National Academies Press, Washington, DC, 2008.
23. E. Scheil: Z. Metallkde, 1942, vol. 34, pp. 70–72.
24. H.D. Brody and M.C. Flemings: Trans. Metall. Soc. AIME, 1966, vol. 236, pp. 615–24.
25. T.W. Clyne and W. Kurz: Metall. Trans. A, 1981, vol. 12A, pp. 965–71.10.1007/BF02643477 ↗
26. B. Giovanola and W. Kurz: Metall. Trans. A, 1990, vol. 21, pp. 260–63.10.1007/BF02656445 ↗
27. M.J. Aziz: J. Appl. Phys., 1982, vol. 53, pp. 1158–68.10.1063/1.329867 ↗
28. Y.-J. Liang, X. Cheng, and H.-M. Wang: Acta Mater., 2016, vol. 118, pp. 17–27.10.1016/j.actamat.2016.07.008 ↗
29. Q. Shi, T.D. Berman, and J.E. Allison: Coupling Experiment and Simulation to Predict Microstructural Evolution and Yield Strength for Age-hardened Aluminum Alloys: Part I. Developing an ICME Methodology for a Casting Alloy, University of Michigan, 2021.
30. MAGMASOFT®—Simulation and virtual optimization casting process. https://www.magmasoft.com/en/. Accessed 2020.
31. JMATPRO®. Accessed 2020.
32. K.P. Young and D.H. Kerkwood: Metall. Trans. A, 1975, vol. 6, pp. 197–205.10.1007/BF02673688 ↗
33. PanAluminum Pandat database. Thermodynamic database for multi-component Aluminum-rich casting and wrought alloys. Accessed 2020.
34. Z.K. Liu and Y.A. Chang: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1081–95.10.1007/s11661-999-0160-3 ↗
35. A.T. Dinsdale: CALPHAD, 1991, vol. 15, pp. 317–425.10.1016/0364-5916(91)90030-N ↗
36. W. Kurz, B. Giovanola, and R. Trivedi: Acta Metall., 1986, vol. 34, pp. 823–30.10.1016/0001-6160(86)90056-8 ↗
37. P.M. Smith and M.J. Aziz: Acta Metall. Mater., 1994, vol. 42, pp. 3515–25.10.1016/0956-7151(94)90483-9 ↗
38. G. Horvay and J. Cahn: Acta Metall., 1961, vol. 9, pp. 695–705.10.1016/0001-6160(61)90008-6 ↗
39. K.A. Jackson and J.D. Hunt: Trans. Metall. Soc. AIME, 1966, vol. 236, pp. 1129–42.
40. Y. Du, Y.A. Chang, B. Huang, W. Gong, Z. Jin, H. Xu, Z. Yuan, Y. Liu, Y. He, and F.Y. Xie: Mater. Sci. Eng. A, 2003, vol. 363, pp. 140–51.10.1016/S0921-5093(03)00624-5 ↗