journal article·2021-06

Understanding the Effects of CoAl2O4 Inoculant Additions on Microstructure in Additively Manufactured Inconel 718 Processed Via Selective Laser Melting

Dhruv Tiparti, I-Ting Ho, Kai-Chun Chang, Tzu-Hou Hsu, An-Chou Yeh, Sammy Tin

Publisher page

Abstract

The effect of varying amounts of CoAl2O4 inoculant ranging from 0 to 2 wt pct on the microstructure evolution of Inconel 718(IN718) fabricated by selective laser melting (SLM) was evaluated. Characterization of the as-built microstructure revealed that addition of CoAl2O4 resulted in a modest degree of grain refinement with a slight increase in microstructural anisotropy. Increasing the total CoAl2O4 content beyond 0.2 wt pct resulted in severe agglomeration of the non-metallic particles and the formation of slag inclusions measuring up to 100 μm in size present in the as-built microstructure. In addition to large agglomerates, the inoculant was chemically reduced to form a fine dispersion of submicron-sized Al2O3 particles throughout the IN718 matrix. The fine dispersion of oxides significantly hindered grain recrystallization during the post-fabrication heat treatment due to a Zener pinning effect. The findings from this study indicate in order to effectively utilize CoAl2O4 as a grain refining inoculant for additive manufacturing, the process parameters need to be optimized to avoid agglomeration of the non-metallic particles and other process-related defects.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. 1 T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, and W. Zhang: Progress in Materials Science, 2018, vol. 92, pp. 112–224.10.1016/j.pmatsci.2017.10.001 ↗
2. 2 T.M. Pollock and S. Tin: Journal of Propulsion and Power, 2006, vol. 22, pp. 361–74.10.2514/1.18239 ↗
3. 3 X. Wang and K. Chou: JOM, 2017, vol. 69, pp. 402–8.10.1007/s11837-016-2198-1 ↗
4. 4 M. Sadowski, L. Ladani, W. Brindley, and J. Romano: Additive Manufacturing, 2016, vol. 11, pp. 60–70.
5. 5 K.N. Amato, S.M. Gaytan, L.E. Murr, E. Martinez, P.W. Shindo, J. Hernandez, S. Collins, and F. Medina: Acta Materialia, 2012, vol. 60, pp. 2229–39.10.1016/j.actamat.2011.12.032 ↗
6. 6 P. Tao, H. Li, B. Huang, Q. Hu, S. Gong, and Q. Xu: Vacuum, 2019, vol. 159, pp. 382–90.10.1016/j.vacuum.2018.10.074 ↗
7. 7 S. Das: Advanced Engineering Materials, 2003, vol. 5, pp. 701–11.10.1002/adem.200310099 ↗
8. 8 S. Kou: Welding Metallurgy, 2nd ed., Wiley-Interscience, Hoboken, N.J, 2003. pp. 170-187
9. 9 F. Yan, W. Xiong, and E. Faierson: Materials, 2017, vol. 10, pp. 1260.10.3390/ma10111260 ↗
10. 10 M.J. Bermingham, D.H. StJohn, J. Krynen, S. Tedman-Jones, and M.S. Dargusch: Acta Materialia, 2019, vol. 168, pp. 261–74.10.1016/j.actamat.2019.02.020 ↗
11. 11 J.A. Spittle: International Materials Reviews, 2006, vol. 51, pp. 247–69.10.1179/174328006X102493 ↗
12. 12 W. Kurz, C. Bezençon, and M. Gäumann: Science and Technology of Advanced Materials, 2001, vol. 2, pp. 185–91.10.1016/S1468-6996(01)00047-X ↗
13. 13 J.H. Martin, B.D. Yahata, J.M. Hundley, J.A. Mayer, T.A. Schaedler, and T.M. Pollock: Nature, 2017, vol. 549, pp. 365–9.10.1038/nature23894 ↗
14. 14 P.C. Collins, D.A. Brice, P. Samimi, I. Ghamarian, and H.L. Fraser: Annual Review of Materials Research, 2016, vol. 46, pp. 63–91.10.1146/annurev-matsci-070115-031816 ↗
15. 15 I.-T. Ho, Y.-T. Chen, A.-C. Yeh, C.-P. Chen, and K.-K. Jen: Additive Manufacturing, 2018, vol. 21, pp. 465–71.10.1016/j.addma.2018.02.018 ↗
16. 16 I.-T. Ho, T.-H. Hsu, Y.-J. Chang, C.-W. Li, K.-C. Chang, S. Tin, K. Kakehi, and A.-C. Yeh: Additive Manufacturing, 2020, vol. 35, pp. 101328.10.1016/j.addma.2020.101328 ↗
17. 17 F. Jian and Y. Bin: High Temperature Alloys for Gas Turbines 1982, 1982, pp. 987-97
18. 18 M. Zielińska, K. Kubiak, and J. Sieniawski: Journal of Achievements in Materials and Manufacturing Engineering, 2009, vol. 35, pp. 55-62.
19. 19 F. Binczyk and J. Śleziona: Archives of Foundry Engineering, 2010, vol. 10, pp. 195–8.
20. 20 F. Binczyk, J. Śleziona, and P. Gradoń: Composites, 2011, vol. 1, pp. 49–55.
21. 21 F. Binczyk: Archives of Foundry Engineering, 2009, vol. 9, pp. 105–8.
22. 22 B.L. Bramfitt: Metallurgical Transactions, 1970, vol. 1, pp. 1987–95.10.1007/BF02642799 ↗
23. 23 D. Qiu, M.-X. Zhang, H.-M. Fu, P.M. Kelly, and J.A. Taylor: Philosophical Magazine Letters, 2007, vol. 87, pp. 505–14.10.1080/09500830701253151 ↗
24. Y. Xiong, X. YingWei, J. Du, A. Yang, L. Liu, and D. Zeng: Metallurgical and Materials Transactions A, 2004, vol. 35, pp. 2111–4.10.1007/s11661-004-0159-8 ↗
25. 25 M. Li, J. Li, D. Qiu, Q. Zheng, G. Wang, and M.-X. Zhang: Philosophical Magazine, 2016, vol. 96, pp. 1556–78.10.1080/14786435.2016.1171413 ↗
26. 26 C. Hong, D. Gu, D. Dai, A. Gasser, A. Weisheit, I. Kelbassa, M. Zhong, and R. Poprawe: Optics & Laser Technology, 2013, vol. 54, pp. 98–109.10.1016/j.optlastec.2013.05.011 ↗
27. 27 P. Yuan and D. Gu: J. Phys. D: Appl. Phys., 2015, vol. 48, pp. 035303.10.1088/0022-3727/48/3/035303 ↗
28. 28 A.L. Greer, A.M. Bunn, A. Tronche, P.V. Evans, and D.J. Bristow: Acta Materialia, 2000, vol. 48, pp. 2823–35.10.1016/S1359-6454(00)00094-X ↗
29. 29 A.L. Greer, P.S. Cooper, M.W. Meredith, W. Schneider, P. Schumacher, J.A. Spittle, and A. Tronche: Advanced Engineering Materials, 2003, vol. 5, pp. 81–91.10.1002/adem.200390013 ↗
30. 30 Z. Liu: Metallurgical and Materials Transactions A, 2017, vol. 48, pp. 4755–76.10.1007/s11661-017-4275-7 ↗
31. 31 C. Ma, L. Chen, C. Cao, and X. Li: Nature Communications, 2017, vol. 8, pp.1-7.10.1038/s41467-016-0009-6 ↗
32. 32 C. Ma, J. Zhao, C. Cao, T.C. Lin, and X. Li: Journal of Manufacturing Science and Engineering, 2016, vol. 138, pp. 12100210.1115/1.4033446 ↗
33. 33 R. Prasher, D. Song, J. Wang, and P. Phelan: Appl. Phys. Lett., 2006, vol. 89, p. 133108.10.1063/1.2356113 ↗
34. 34 I.M. Mahbubul, R. Saidur, and M.A. Amalina: International Journal of Heat and Mass Transfer, 2012, vol. 55, pp. 874–85.10.1016/j.ijheatmasstransfer.2011.10.021 ↗
35. 35 D.H. StJohn, M. Qian, M.A. Easton, and P. Cao: Acta Materialia, 2011, vol. 59, pp. 4907–21.10.1016/j.actamat.2011.04.035 ↗
36. D.H. StJohn, S.D. McDonald, M.J. Bermingham, S. Mereddy, A. Prasad, and M. Dargusch: KEM, 2018, vol. 770, pp. 155–64.10.4028/www.scientific.net/KEM.770.155 ↗
37. 37 M. Bermingham, D. StJohn, M. Easton, L. Yuan, and M. Dargusch: JOM, 2020, vol. 72, pp. 1065–73.10.1007/s11837-020-04019-5 ↗
38. 38 D. Dai and D. Gu: International Journal of Machine Tools and Manufacture, 2016, vol. 100, pp. 14–24.10.1016/j.ijmachtools.2015.10.004 ↗
39. 39 P. Yuan, D. Gu, and D. Dai: Materials & Design, 2015, vol. 82, pp. 46–55.10.1016/j.matdes.2015.05.041 ↗
40. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier, Amsterdam; 2012. pp. 343-48
41. 41 A.O.F. Hayama, H.R.Z. Sandim, J.F.C. Lins, M.F. Hupalo, and A.F. Padilha: Materials Science and Engineering: A, 2004, vol. 371, pp. 198–209.10.1016/j.msea.2003.11.052 ↗
42. 42 H.R.Z. Sandim, A.O.F. Hayama, and D. Raabe:Materials Science and Engineering:A, 2006, vol. 430, pp. 172-78.10.1016/j.msea.2006.05.110 ↗
43. 43 Z. Oksiuta, P. Kozikowski, M. Lewandowska, M. Ohnuma, K. Suresh, and K.J. Kurzydlowski: J Mater Sci, 2013, vol. 48, pp. 4620–5.10.1007/s10853-013-7255-3 ↗
44. 44 F.J. Humphreys: Acta Materialia, 1997, vol. 45, pp. 5031–9.10.1016/S1359-6454(97)00173-0 ↗
45. 45 S. Sui, H. Tan, J. Chen, C. Zhong, Z. Li, W. Fan, and W. Huang: Acta Materialia, 2019,vol. 164, pp. 413-27.10.1016/j.actamat.2018.10.032 ↗
46. 46 W.M. Tucho, P. Cuvillier, A. Sjolyst-Kverneland, and V. Hansen: Materials Science and Engineering: A, 2017, vol. 689, pp. 220–32.10.1016/j.msea.2017.02.062 ↗
47. 47 N. Kouraytem, J. Varga, B. Amin-Ahmadi, H. Mirmohammad, R.A. Chanut, A.D. Spear, and O.T. Kingstedt: Materials & Design, 2021, vol. 198, pp. 109228.10.1016/j.matdes.2020.109228 ↗
48. 48 W.M. Tucho and V. Hansen: J Mater Sci, 2019, vol. 54, pp. 823–39.10.1007/s10853-018-2851-x ↗
49. 49 E. Chlebus, K. Gruber, B. Kuźnicka, J. Kurzac, and T. Kurzynowski: Materials Science and Engineering: A, 2015, vol. 639, pp. 647–55.10.1016/j.msea.2015.05.035 ↗