Excess Solute Carbon and Retained Tetragonality in Tempered Fe-0.6C-1Mn Martensite and the Effect of Silicon Addition
Source abstract
Abstract
The tetragonality and carbon distribution in tempered Fe-0.6C-1Mn martensite were investigated by X-ray diffraction and atom probe tomography to elucidate strain relaxation in the tetragonal lattice during tempering and its relationship with the solubility of excess carbon in martensite. Even though tetragonality (c/a) decreased with an increase in the tempering temperature, it persisted at low levels up to 400 °C. Si addition suppressed the decrease in tetragonality at 400 °C by inhibiting recovery in the dislocated matrix. Such persistence implies that dislocation migration is crucial for the complete release of tetragonal lattice strain at such a temperature, in addition to the decrease in the amount of solute carbon in martensite. A low level of tetragonality was observed for martensite containing carbon in the solid solution below the critical value of ~ 0.2 mass pct, at which a bcc structure was predicted. The amount of solute carbon after tempering was linearly correlated with tetragonality in the solute carbon content range of 0.07 to 0.6 mass pct, and the correlation coefficient was similar to those for as-quenched auto-tempered martensite and bainitic ferrite; these results indicate that the amount of excess carbon is simply determined by the amount of tetragonal lattice distortions remaining after carbide precipitation and recovery.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. [1] G.R. Speich, W.C. Leslie: Metall. Trans., 1972, vol. 3, pp. 1043–1054.10.1007/BF02642436 ↗
2. [2] M. Kusunoki, S. Nagakura: J. Appl. Crystallogr., 1981, vol. 14, pp. 329–336.10.1107/S0021889881009485 ↗
3. K.A. Taylor, L.I. Chang, G.B. Olson, G.D.W. Smith, M. Cohen, J.B. VanderSande: Metall. Trans. A, 1989, vol. 20, pp. 2717–2737.10.1007/BF02670166 ↗
4. [4] M.K. Miller, P.A. Beaven, S.S. Brenner, G.D.W. Smith: Metall. Trans. A, 1983, vol. 14, pp. 1021–1024.
5. G.Krauss: in Phase transformations in steels, Diffusionless transformations, high strength steels, modelling and advanced analytical techniques, Woodhead Publishing, Cambridge, 2012, pp. 126-15010.1533/9780857096111.1.126 ↗
6. [6] K.H. Jack: J. Iron Steel Inst., 1951, vol. 169, pp. 26–36.
7. [7] Y. Hirotsu, S. Nagakura: Acta Metall., 1972, vol. 20, pp. 645–655.10.1016/0001-6160(72)90020-X ↗
8. [8] K. Shimizu, H. Okamoto: Trans. Jpn. Inst. Met., 1974, vol. 15, pp. 193–199.10.2320/matertrans1960.15.193 ↗
9. [9] D.L. Williamson, K. Nakazawa, G. Krauss: Metall. Trans. A, 1979, vol. 10, pp. 1351–1363.10.1007/BF02811991 ↗
10. [10] G. Miyamoto, J.C. Oh, K. Hono, T. Furuhara, T. Maki: Acta Mater., 2007, vol. 55, pp. 5027–5038.10.1016/j.actamat.2007.05.023 ↗
11. [11] A.G. Allten, P. Payson: Trans. Am. Soc. Met., 1953, vol. 45, pp. 498–532.
12. [12] C.J. Altstetter, M. Cohen, B.L. Averbach: Trans. Am. Soc. Met., 1962, vol. 55, pp. 287–300.
13. [13] R.A. Grange, C.R. Hribal, L.F. Porter: Metall. Trans. A, 1977, vol. 8, pp. 1775–1785.10.1007/BF02646882 ↗
14. S.J. Barnard, G.D.W. Smith, A.J. Garrat-Reed, J. VanderSande, Solid-Solid Phase Transformations. TMS-AIME, Warrendale, PA, 1981, pp. 881–885.
15. [15] C. Zhu, X.Y. Xiong, A. Cerezo, R. Hardwicke, G. Krauss, G.D.W. Smith: Ultramicroscopy, 2007, vol. 107, pp. 808–812.10.1016/j.ultramic.2007.02.033 ↗
16. B. Kim, E. Boucard, T. Sourmail, D. SanMartín, N. Gey, P.E.J. Rivera-Díaz-del-Castillo: Acta Mater., 2014, vol. 68, pp. 169–178.10.1016/j.actamat.2014.01.039 ↗
17. [17] K. Honda, Z. Nishiyama: Sci. Rep. Tohoku Imp. Univ., 1932, vol. 21, pp. 299–331.
18. [18] L. Cheng, A. Böttger, Th.H. de Keijser, E.J. Mittemeijer: Scripta Metall. Mater.,1990, vol. 24, pp. 509–514.10.1016/0956-716X(90)90192-J ↗
19. [19] L. Xiao, Z. Fan, Z. Jinxiu, Z. Mingxing, K. Mokuang, G. Zhenqi: Phys. Rev. B, 1995, vol. 52, pp. 9970–9978.10.1103/PhysRevB.52.9970 ↗
20. [20] O.D. Sherby, J. Wadsworth, D.R. Lesuer, C.K. Syn: Mater. Trans., 2008, vol. 49, pp. 2016–2027.10.2320/matertrans.MRA2007338 ↗
21. [21] B. Hutchinson, J. Hagström, O. Karlsson, D. Lindell, M. Tornberg, F. Lindberg, M. Thuvander: Acta Mater., 2011, vol. 59, pp. 5845–5858.10.1016/j.actamat.2011.05.061 ↗
22. [22] Y. Lu, H. Yu, R.D. Sisson Jr.: Mater. Sci. Eng. A, 2017, vol. 700, pp. 592–597.10.1016/j.msea.2017.05.094 ↗
23. [23] N. Maruyama, S. Tabata, H. Kawata: Metall. Mater. Trans. A, 2020, vol. 51, pp. 1085–1097.10.1007/s11661-019-05617-y ↗
24. [24] C.S. Roberts, B.L. Averbach, M. Cohen: Trans. Am. Soc. Met., 1953, vol. 45, pp. 576–604.
25. [25] G.V. Kurdjumov: J. Iron Steel Inst., 1960, vol. 195, pp. 26–48.
26. [26] P.C. Chen, B.O. Hall, P.G. Winchell: Metall. Trans. A, 1980, vol. 11, pp. 1323–1331.10.1007/BF02653486 ↗
27. [27] P.C. Chen and P.G. Winchell: Metall. Trans. A, 1980, vol. 11, pp. 1333–133910.1007/BF02653487 ↗
28. [28] L. Cheng, N.M. van der Pers, A. Böttger, Th.H. de Keijser, E.J. Mittemeijer: Metall. Trans. A, 1991, vol. 22, pp. 1957–1967.10.1007/BF02669863 ↗
29. [29] C. Zener: Trans. AIME, 1946, vol. 167 pp. 550–595.
30. [30] G.V. Kurdjumov, A.G. Khachaturyan: Metall. Trans., 1972, vol. 3, pp. 1069–1076.10.1007/BF02642438 ↗
31. [31] G.V. Kurdjumov, A.G. Khachaturyan: Acta Metall., 1975, vol. 23, pp. 1077–1088.10.1016/0001-6160(75)90112-1 ↗
32. [32] Z. Fan, L. Xiao, Z. Jinxiu, K. Mokuang, G. Zhenqi: Phys. Rev. B, 1995, vol. 52, pp. 9979–9987.10.1103/PhysRevB.52.9979 ↗
33. [33] A. Udyansky, J. von Pezold, A. Dick, J. Neugebauer: Phys. Rev. B, 2011, vol. 83, pp. 184112.10.1103/PhysRevB.83.184112 ↗
34. [34] A. Perlade, O. Bouaziz, Q. Furnémont: Mater. Sci. Eng. A, 2003, vol. 356, pp. 145–152.10.1016/S0921-5093(03)00121-7 ↗
35. [35] H.M. Rietveld: J. Appl. Crystallogr., 1969, vol. 2, pp. 65–71.10.1107/S0021889869006558 ↗
36. [36] G.K. Williamson, R.E. Smallman: Philos. Mag., 1956, vol. 1, pp. 34–46.10.1080/14786435608238074 ↗
37. [37] W. Sha, L. Chang, G.D.W. Smith, L. Cheng, E.J. Mittemeijer: Surf. Sci., 1992, vol. 266, pp. 416–423.10.1016/0039-6028(92)91055-G ↗
38. D.J. Larson, T.J. Prosa, R.M. Ulfig, B.P. Geiser, T.F. Kelly (2013) Local Electrode Atom Probe Tomography - A User’s Guide. Springer, Berlin, pp. 17810.1007/978-1-4614-8721-0 ↗
39. S. Morito, J. Nishikawa and T. Maki: ISIJ International, vol. 43, 2003, pp. 1475–147710.2355/isijinternational.43.1475 ↗
40. [40] J.C. Swartz: Trans. Met. Soc. AIME, 1969, vol. 245, pp. 1083–1092.
41. [41] J. Chipman: Metall. Mater. Trans. B, 1972, vol. 3, pp. 55–64.10.1007/BF02680585 ↗
42. [42] L. Morsdorf, C.C. Tasan, D. Ponge, D. Raabe: Acta Mater., 2015, vol. 95, pp. 366–377.10.1016/j.actamat.2015.05.023 ↗
43. [43] J.R.G. da Silva, R.B. McLellan: Mater. Sci. Eng., 1976, vol. 26, pp. 83–87.10.1016/0025-5416(76)90229-9 ↗
44. D. Löhe, O. Vöhringer (2002) Handbook of Residual Stress and Deformation, ASM International, Materials Park, pp. 54–69.
45. [45] L. Cheng, N.M. van der Pers, A. Böttger, Th.H. de Keijser, E.J. Mittemeijer: Metall. Trans. A, 1990, vol. 21, pp. 2857–2867.10.1007/BF02647206 ↗
46. [46] T. Tanaka, N. Maruyama, N. Nakamura, A.J. Wilkinson: Acta Mater., 2020, vol. 195, pp. 728–738.10.1016/j.actamat.2020.06.017 ↗
47. [47] H. Abe: Scand. J. Metall., 1984, vol. 13, pp. 226–239.
48. [48] J.H. Jang, H.K.D.H. Bhadeshia, D.-W. Suh: Scripta Mater., 2013, vol. 68, pp. 195–198.10.1016/j.scriptamat.2012.10.017 ↗
49. [49] C.N. Hulme-Smith, I. Lonardelli, A.C. Dippel, H.K.D.H. Bhadeshia: Scripta Mater., 2013, vol. 69, pp. 409–412.10.1016/j.scriptamat.2013.05.035 ↗
50. [50] C. Garcia-Mateo, J.A. Jiménez, H.-W. Yen, M.K. Miller, L. Morales-Rivas, M. Kuntz, S.P. Ringer, J.-R. Yang, F.G. Caballero: Acta Mater., 2015, vol. 91, pp. 162–173.10.1016/j.actamat.2015.03.018 ↗
51. [51] H. Ohtsuka, V.A. Dinh, T. Ohno, K. Tsuzaki, K. Tsuchiya, R. Sahara, H. Kitazawa, T. Nakamura: J. Iron Steel Inst. Japan, 2014, vol. 100, pp. 1329–1338.10.2355/tetsutohagane.100.1329 ↗
52. [52] R. Rementeria, J.D. Poplawsky, M.M. Aranda, W. Guo, J.A. Jimenez, C. Garcia-Mateo, F.G. Caballero: Acta Mater., 2017, vol. 125, pp. 359–368.10.1016/j.actamat.2016.12.013 ↗
53. [53] F. Archie, M.Z. Mughal, M. Sebastiani, E. Bemporad, S. Zaefferer: Acta Mater., 2018, vol. 150, pp. 327–338.10.1016/j.actamat.2018.03.030 ↗
54. [54] D. Griffiths, J.N. Riley: Acta Metall., 1966, vol. 14, pp. 755–773.10.1016/0001-6160(66)90123-4 ↗
55. [55] M. Tomita, T. Inaguma, H. Sakamoto, K. Ushioda: ISIJ Int., 2017, vol. 57, pp. 921–928.10.2355/isijinternational.ISIJINT-2016-634 ↗
56. [56] N. Sugiura, N. Yoshinaga, K. Kawasaki, Y. Yamaguchi, J. Takahashi, T. Yamada: J. Iron Steel Inst. Japan, 2008, vol. 94, pp. 179–187.10.2355/tetsutohagane.94.179 ↗
57. [57] T. Ogawa, N. Sugiura, N. Maruyama, N. Yoshinaga: Mater. Sci. Eng. A, 2013, vol. 564, pp. 42–45.10.1016/j.msea.2012.11.083 ↗
58. G. Miyamoto, Doctoral thesis, Kyoto University, 2006, p. 49.
59. [59] H. Sawada, N. Maruyama, S. Tabata, K. Kawakami: ISIJ Int., 2019, vol. 59, pp. 1128–1135.10.2355/isijinternational.ISIJINT-2018-695 ↗
60. [60] B. Gault, M.D. Moody, J.M. Cairney, S.P. Ringer, Atom Probe Microscopy, Springer, New York, 2012.10.1007/978-1-4614-3436-8 ↗
61. [61] M.K. Miller, M.G. Hetherington: Surf. Sci., 1991, vol. 246, pp. 442–449.10.1016/0039-6028(91)90449-3 ↗
62. [62] W. Lu, M. Herbig, C.H. Liebscher, L. Morsdorf, R.K.W. Marceau, G. Dehm, D. Raabe: Acta Mater., 2018, vol. 158, pp. 297–312.10.1016/j.actamat.2018.07.071 ↗