journal article·2021-05

Strengthening Mechanisms in Nano Oxide Dispersion-Strengthened Fe-18Cr Ferritic Steel at Different Temperatures

Rajesh Jarugula, Samartha Channagiri, S. Ganesh Sundara Raman, G. Sundararajan

Publisher page

Abstract

The objective of the present work is to evaluate isothermal uniaxial compressive deformation behavior of nano oxide dispersion-strengthened (n-ODS)-18Cr ferritic steel over a range of temperatures RT—1173 K and range of strain rates 10−4 to 10−2 s−1. Irrespective of temperature, the influence of the strain rate on the yield strength is insignificant up to 673 K. It is found that the plot of variation of yield strength as a function of temperature exhibits three regimes, which indicates that different deformation mechanisms are governing the yield strength of n-ODS-18Cr steel. Transmission electron microscopic analysis of a sample deformed at the highest temperature of 1173 K and the lowest strain rate of 10−4 s−1 demonstrates no significant change in the grain size and nanoprecipitate size. Also, it confirms the interaction between dislocations and nanoprecipitates. Different deformation mechanisms governing the yield strength of n-ODS-18Cr steel are identified in all three regimes and their contributions are quantified.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fusion materials and technologies · Microstructure and mechanical properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. S. Ukai, M. Harada, H. Okada, M. Inoue, S. Nomura, S. Shikakura, K. Asabe, T. Nishida, and M. Fujiwara: J. Nucl. Mater., 1993, vol. 204, pp. 65–73.10.1016/0022-3115(93)90200-I ↗
2. C. Zakine, C. Prioul, and D. François: Mater. Sci. Eng. A, 1996, vol. 219, pp. 102–8.10.1016/S0921-5093(96)10415-9 ↗
3. M.J. Alinger, G.R. Odette, and G.E. Lucas: J. Nucl. Mater., 2002, vol. 311, pp. 484–9.10.1016/S0022-3115(02)01220-5 ↗
4. R.L. Klueh, P.J. Maziasz, I.S. Kim, L. Heatherly, D.T. Hoelzer, N. Hashimoto, E.A. Kenik, and K. Miyahara: J. Nucl. Mater., 2002, vol. 307–311, pp. 773–7.10.1016/S0022-3115(02)01046-2 ↗
5. D.T. Hoelzer, J. Bentley, M. A. Sokolov, M.K. Miller, G.R. Odette, and M.J. Alinger: J. Nucl. Mater., 2007, vol. 367–370, pp. 166–72.10.1016/j.jnucmat.2007.03.151 ↗
6. A. Hirata, T. Fujita, Y.R. Wen, J.H. Schneibel, C.T. Liu, and M.W. Chen: Nat. Mater., 2011, vol. 10, pp. 922–6.10.1038/nmat3150 ↗
7. G. Sundararajan, R. Vijay, and A.V. Reddy: Curr. Sci., 2013, vol. 105, pp. 1100-6.
8. Dadé, J. Malaplate, J. Garnier, F. Barcelo, F. Mompiou, P. Wident, and A. Deschamps: Materialia, 2018, vol. 4, pp. 585–94.10.1016/j.mtla.2018.11.016 ↗
9. C.P. Massey, D.T. Hoelzer, P.D. Edmondson, A. Kini, B. Gault, K.A. Terrani, and S.J. Zinkle: Scr. Mater., 2019, vol. 170, pp. 134–9.10.1016/j.scriptamat.2019.06.001 ↗
10. J.H. Schneibel, M. Heilmaier, W. Blum, G. Hasemann, and T. Shanmugasundaram: Acta Mater., 2011, vol. 59, pp. 1300–8.10.1016/j.actamat.2010.10.062 ↗
11. J.H. Schneibel, C.T. Liu, M.K. Miller, M.J. Mills, P. Sarosi, M. Heilmaier, and D. Sturm: Scr. Mater., 2009, vol. 61, pp. 793–6.10.1016/j.scriptamat.2009.06.034 ↗
12. Y. Li, T. Nagasaka, T. Muroga, A. Kimura, and S. Ukai: Fusion Eng. Des., 2011, vol. 86, pp. 2495–9.10.1016/j.fusengdes.2011.03.004 ↗
13. F. Siska, L. Stratil, H. Hadraba, S. Fintova, I. Kubena, V. Hornik, R. Husak, D. Bartkova, and T. Zalezak: Mater. Sci. Eng. A, 2018, vol. 732, pp. 112–9.10.1016/j.msea.2018.06.109 ↗
14. S. Ukai, T. Kaito, S. Ohtsuka, T. Narita, M. Fujiwara, and T. Kobayashi: ISIJ Int., 2003, vol. 43, pp. 2038–45.10.2355/isijinternational.43.2038 ↗
15. S. Ukai, S. Ohtsuka, T. Kaito, H. Sakasegawa, N. Chikata, S. Hayashi, and S. Ohnuki: Mater. Sci. Eng. A, 2009, vol. 510–511, pp. 115–20.10.1016/j.msea.2008.04.126 ↗
16. M. Nagini, R. Vijay, M. Ramakrishna, a. V. Reddy, and G. Sundararajan: Mater. Sci. Eng. A, 2015, vol. 620, pp. 490–9.10.1016/j.msea.2014.10.050 ↗
17. A. Steckmeyer, M. Praud, B. Fournier, J. Malaplate, J. Garnier, J.L. Béchade, I. Tournié, A. Tancray, A. Bougault, and P. Bonnaillie: J. Nucl. Mater., 2010, vol. 405, pp. 95–100.10.1016/j.jnucmat.2010.07.027 ↗
18. M. Dadé, J. Malaplate, J. Garnier, F. De Geuser, F. Barcelo, P. Wident, and A. Deschamps: Acta Mater., 2017, vol. 127, pp. 165–77.10.1016/j.actamat.2017.01.026 ↗
19. J.H. Kim, T.S. Byun, and D.T. Hoelzer: J. Nucl. Mater., 2010, vol. 407, pp. 143–50.10.1016/j.jnucmat.2010.09.054 ↗
20. M. Serrano, M. Hernández-Mayoral, and A. García-Junceda: J. Nucl. Mater., 2012, vol. 428, pp. 103–9.10.1016/j.jnucmat.2011.08.016 ↗
21. S.F. Li, Z.J. Zhou, P.H. Wang, H.Y. Sun, M. Wang, and G.M. Zhang: Mater. Des., 2016, vol. 90, pp. 318–29.10.1016/j.matdes.2015.10.138 ↗
22. Y. de Carlan, J.-L. Bechade, P. Dubuisson, J.-L. Seran, P. Billot, A. Bougault, T. Cozzika, S. Doriot, D. Hamon, J. Henry, M. Ratti, N. Lochet, D. Nunes, P. Olier, T. Leblond, and M.H. Mathon: J. Nucl. Mater., 2009, vol. 386–388, pp. 430–2.10.1016/j.jnucmat.2008.12.156 ↗
23. A. Kimura, R. Kasada, N. Iwata, H. Kishimoto, C.H. Zhang, J. Isselin, P. Dou, J.H. Lee, N. Muthukumar, T. Okuda, M. Inoue, S. Ukai, S. Ohnuki, T. Fujisawa, and T.F. Abe: J. Nucl. Mater., 2011, vol. 417, pp. 176–9.10.1016/j.jnucmat.2010.12.300 ↗
24. S. Li, Z. Zhou, M. Li, M. Wang, and G. Zhang: J. Alloys Compd., 2015, vol. 648, pp. 39–45.10.1016/j.jallcom.2015.06.248 ↗
25. M. Nagini, R. Vijay, and K. V Rajulapati: Metall. Mater. Trans. A, 2016, vol. 47, pp. 4197–209.10.1007/s11661-016-3583-7 ↗
26. Z. Oksiuta, P. Mueller, P. Spätig, and N. Baluc: J. Nucl. Mater., 2011, vol. 412, pp. 221–6.10.1016/j.jnucmat.2011.03.006 ↗
27. Q. Zhao, L. Yu, Z. Ma, H. Li, Z. Wang, and Y. Liu: Materials (Basel)., 2018, vol. 11, p. 1044.10.3390/ma11061044 ↗
28. X. Boulnat, D. Fabregue, M. Perez, M.-H. Mathon, and Y. de Carlan: Metall. Mater. Trans. A, 2013, vol. 44, pp. 2461–5.10.1007/s11661-013-1719-6 ↗
29. X. Boulnat, M. Perez, D. Fabregue, T. Douillard, M.H. Mathon, and Y. De Carlan: Metall. Mater. Trans. A., 2014, vol. 45, pp. 1485–97.10.1007/s11661-013-2107-y ↗
30. M. Praud, F. Mompiou, J. Malaplate, D. Caillard, J. Garnier, A. Steckmeyer, and B. Fournier: J. Nucl. Mater., 2012, vol. 428, pp. 90–97.10.1016/j.jnucmat.2011.10.046 ↗
31. A. Chauhan, F. Bergner, A. Etienne, J. Aktaa, Y. de Carlan, C. Heintze, D. Litvinov, M. Hernandez-Mayoral, E. Oñorbe, B. Radiguet, and A. Ulbricht: J. Nucl. Mater., 2017, vol. 495, pp. 6–19.10.1016/j.jnucmat.2017.07.060 ↗
32. M. Nagini, R. Vijay, K. V. Rajulapati, A. V. Reddy, and G. Sundararajan: Mater. Sci. Eng. A, 2017, vol. 708, pp. 451–9.10.1016/j.msea.2017.10.023 ↗
33. J. Shen, Y. Li, F. Li, H. Yang, Z. Zhao, S. Kano, Y. Matsukawa, Y. Satoh, and H. Abe: Mater. Sci. Eng. A, 2016, vol. 673, pp. 624–32.10.1016/j.msea.2016.07.030 ↗
34. J.H. Kim, T.S. Byun, D.T. Hoelzer, C.H. Park, J.T. Yeom, and J.K. Hong: Mater. Sci. Eng. A, 2013, vol. 559, pp. 111–8.10.1016/j.msea.2012.08.041 ↗
35. R. Rahmanifard, H. Farhangi, A.J. Novinrooz, and S. Moniri: Metall. Mater. Trans. A, 2012, vol. 44, pp. 990–8.
36. J. Ren, L. Yu, Y. Liu, C. Liu, H. Li, and J. Wu: Materials (Basel)., 2018, vol. 11, p. 118.10.3390/ma11010118 ↗
37. M.C. Brandes, L. Kovarik, M.K. Miller, G.S. Daehn, and M.J. Mills: Acta Mater., 2012, vol. 60, pp. 1827–39.10.1016/j.actamat.2011.11.057 ↗
38. J.H. Kim, T.S. Byun, D.T. Hoelzer, S.-W. Kim, and B.H. Lee: Mater. Sci. Eng. A, 2013, vol. 559, pp. 101–10.10.1016/j.msea.2012.08.042 ↗
39. R. Jarugula, P.S. Babu, S.G.S. Raman, and G. Sundararajan: Materialia, 2020, vol. 12, p. 100788.10.1016/j.mtla.2020.100788 ↗
40. A. Chauhan, D. Litvinov, Y. de Carlan, and J. Aktaa: Mater. Sci. Eng. A, 2016, vol. 658, pp. 123–34.10.1016/j.msea.2016.01.109 ↗
41. J. Rösler and E. Arzt: Acta Met. Mater., 1990, vol. 38, pp. 671–83.10.1016/0956-7151(90)90223-4 ↗
42. S. Seils, A. Kauffmann, F. Hinrichs, D. Schliephake, T. Boll, and M. Heilmaier: Mater. Sci. Eng. A, 2020, vol. 786, p. 139452.10.1016/j.msea.2020.139452 ↗
43. R. DiDomizio, S. Huang, L. Dial, J. Ilavsky, and M. Larsen: Metall. Mater. Trans. A, 2014, vol. 45, pp. 5409–18.10.1007/s11661-014-2521-9 ↗
44. R. Jarugula, S. Raman, and G. Sundararajan: Materialia, 2019, vol. 6, p. 100257.10.1016/j.mtla.2019.100257 ↗
45. D. Brunner and J. Diehl: Phys. status solidi, 1987, vol. 104, pp. 145–55.10.1002/pssa.2211040110 ↗
46. M.M. Hutchison: Philos. Mag., 1963, vol. 8, pp. 121–7.10.1080/14786436308212493 ↗
47. C.E. Lacy and M. Gensamer: Trans. AsM, 1944, vol. 32, pp. 88–110.
48. G.I. Taylor: Proc. R. Soc. Lond. A, 1934, vol. 145, pp. 362–87.10.1098/rspa.1934.0106 ↗
49. B. Mouawad, X. Boulnat, D. Fabrègue, M. Perez, and Y. De Carlan: J. Nucl. Mater., 2015, vol. 465, pp. 54–62.10.1016/j.jnucmat.2015.05.053 ↗
50. J. Bentley and D. Hoelzer: Microsc. Microanal., 2008, vol. 14, pp. 1416–7.10.1017/S1431927608088296 ↗
51. A. Steckmeyer, V.H. Rodrigo, J.M. Gentzbittel, V. Rabeau, and B. Fournier: J. Nucl. Mater., 2012, vol. 426, pp. 182–8.10.1016/j.jnucmat.2012.03.016 ↗
52. E.O. Hall: Proc. Phys. Soc. Sect. B, 1951, vol. 64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
53. J.H. Schneibel and M. Heilmaier: Mater. Trans., 2015, vol. 55, pp. 44–51.10.2320/matertrans.MA201309 ↗
54. J.W. Martin: Micromechanisms in Particle-Hardened Alloys, Cambridge University Press, Cambridge, 1980.
55. U.F. Kocks, A.S. Argon, and M.F. Ashby: Prog. Mater. Sci., 1975, vol. 19, pp. 1–291.10.1016/0079-6425(75)90005-5 ↗
56. E. Nembach: Acta Met. mater., 1992, vol. 40, pp. 3325–30.10.1016/0956-7151(92)90045-G ↗
57. J. Lu, O. Omotoso, J.B. Wiskel, D.G. Ivey, and H. Henein: Metall. Mater. Trans. A, 2012, vol. 43, pp. 3043–61.10.1007/s11661-012-1135-3 ↗
58. J.B. Ferguson, B.F. Schultz, D. Venugopalan, H.F. Lopez, P.K. Rohatgi, K. Cho, and C.S. Kim: Met. Mater. Int., 2014, vol. 20, pp. 375–88.10.1007/s12540-014-2017-6 ↗
59. C.E. Carlton and P.J. Ferreira: Acta Mater., 2007, vol. 55, pp. 3749–56.10.1016/j.actamat.2007.02.021 ↗
60. W. Blum and X.H. Zeng: Acta Mater., 2009, vol. 57, pp. 1966–74.10.1016/j.actamat.2008.12.041 ↗
61. W. Blum and X.H. Zeng: Acta Mater., 2011, vol. 59, pp. 6205–6.10.1016/j.actamat.2011.05.032 ↗
62. J.H. Kim, T.S. Byun, and D.T. Hoelzer: J. Nucl. Mater., 2012, vol. 425, pp. 147–55.10.1016/j.jnucmat.2011.06.040 ↗
63. D. Srolovitz, R. Petkovic-Luton, and M.J. Luton: Scr. Metall., 1982, vol. 16, pp. 1401–6.10.1016/0036-9748(82)90436-7 ↗
64. E. Arzt and D.S. Wilkinson: Acta Metall., 1986, vol. 34, pp. 1893–8.10.1016/0001-6160(86)90247-6 ↗
65. E. Arzt and J. Rösler: Acta Metall., 1988, vol. 36, pp. 1053–60.10.1016/0001-6160(88)90159-9 ↗
66. Y.J. Li, X.H. Zeng, and W. Blum: Acta Mater., 2004, vol. 52, pp. 5009–18.10.1016/j.actamat.2004.07.003 ↗
67. W. Blum, Y.J. Li, J. Chen, X.H. Zeng, and K. Lu: Int. J. Mater. Res., 2006, vol. 97, pp. 1661–6.10.3139/146.101398 ↗
68. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, 1982.
69. F.S. Buffington, K. Hirano, and K. Cohen: Acta Metall., 1961, vol. 9, pp. 434–9.10.1016/0001-6160(61)90137-7 ↗