Origins of Non-random Particle Distributions and Implications to Abnormal Grain Growth in an Al-3.5 Wt Pct Cu Alloy
Source abstract
Abstract
The mechanisms of abnormal grain growth (AGG) in particle-containing systems have long been a mystery. Recently, we reported that a non-random particle distribution can induce a grain size advantage and trigger AGG. However, the processing conditions leading to a non-random particle distribution are far from being understood. Here, we investigate the particle distribution and concomitant grain growth behavior at different annealing temperatures and times in an Al-3.5 wt pct Cu alloy by scanning electron microscopy (SEM). At high temperatures and long times, the particle distribution evolves from random to non-random, with an accompanying transition from normal grain growth (NGG) to AGG. Analytical calculations suggest that a non-random particle distribution is introduced by residual Cu segregation even after homogenization. In short, the corresponding fluctuation of θ-Al2Cu phase distribution is amplified at elevated temperatures via particle dissolution. We quantify the spatial inhomogeneity of particles through the Gini coefficient and link this important parameter to the critical grain size necessary for AGG. The trends are conveyed succinctly in a temperature–time–(structural) transformation (TTT) diagram, which identifies the onset of AGG in an Al-3.5 wt pct Cu alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. E.O. Hall, Proc. Phys. Soc. B 64, 747–753 (1951)10.1088/0370-1301/64/9/303 ↗
2. N.J. Petch, J. Iron Steel Inst. 173, 25–28 (1953)
3. G.S. Rohrer, Metall. Mater. Trans. A 41A, 1063–1100 (2010)10.1007/s11661-010-0215-5 ↗
4. P.A. Manohar, M. Ferry, T. Chandra, ISIJ Int. 38, 913–924 (1998)10.2355/isijinternational.38.913 ↗
5. J.E. Burke, AIME Trans. 180, 73–91 (1949)
6. J.E. Burke, D. Turnbull, Prog. Met. Phys. 3, 220–292 (1952)10.1016/0502-8205(52)90009-9 ↗
7. J. Humphreys, G.S. Rohrer, A. Rollett, in Recrystallization and Related Annealing Phenomena, 3rd edn., ed. by J. Humphreys, G.S. Rohrer, A. Rollett (Elsevier, Oxford, 2017), pp. 375–42910.1016/B978-0-08-098235-9.00011-2 ↗
8. I.M. Lifshitz, V.V. Slyozov, J. Phys. Chem. Solids 19, 35–50 (1961)10.1016/0022-3697(61)90054-3 ↗
9. C. Wagner, Z. Elektrochem. Ber. Bunsenges. Phys. Chem. 65, 581–591 (1961)
10. M. Hillert, Acta Metall. 13, 227–238 (1965)10.1016/0001-6160(65)90200-2 ↗
11. D. Duly, G.J. Baxter, H.R. Shercliff, J.A. Whiteman, C.M. Sellars, M.F. Ashby, Acta Mater. 44, 2947–2962 (1996)10.1016/1359-6454(95)00392-4 ↗
12. J.E. May, D. Turnbull, Trans. Metall. Soc. AIME 212, 769 (1958)
13. J. Calvet and C. Renon: Mém. Sci. Rev. Métall., 1960, vol. 57.10.1051/jcp/1960570593 ↗
14. A. Gangulee, F.M. D’Heurle, Thin Solid Films 12, 399–402 (1972)10.1016/0040-6090(72)90103-4 ↗
15. T. Gladman, Mater. Sci. Forum 94–96, 113–128 (1992)10.4028/www.scientific.net/MSF.94-96.113 ↗
16. I.-J. Bae, S. Baik, J. Am. Ceram. Soc. 80, 1149–1156 (1997)10.1111/j.1151-2916.1997.tb02957.x ↗
17. J. Dennis, P.S. Bate, J.F. Humphreys, Mater. Sci. Forum 558–559, 717–722 (2007)10.4028/www.scientific.net/MSF.558-559.717 ↗
18. J. Dennis, P.S. Bate, F.J. Humphreys, Acta Mater. 57, 4539–4547 (2009)10.1016/j.actamat.2009.06.018 ↗
19. E.A. Holm, T.D. Hoffmann, A.D. Rollett, C.G. Roberts, IOP Conf. Ser. Mater. Sci. Eng. 89, 012005 (2015)10.1088/1757-899X/89/1/012005 ↗
20. T. Omori, T. Kusama, S. Kawata, I. Ohnuma, Y. Sutou, Y. Araki, K. Ishida, R. Kainuma, Science 341, 1500 (2013)10.1126/science.1238017 ↗
21. S. Jin, M. Huang, Y. Kwon, L. Zhang, B.-W. Li, S. Oh, J. Dong, D. Luo, M. Biswal, B.V. Cunning, P.V. Bakharev, I. Moon, W.J. Yoo, D.C. Camacho-Mojica, Y.-J. Kim, S.H. Lee, B. Wang, W.K. Seong, M. Saxena, F. Ding, H.-J. Shin, R.S. Ruoff, Science 362, 1021–1025 (2018)10.1126/science.aao3373 ↗
22. I. Andersen, Ø. Grong, N. Ryum, Acta Metall. Mater. 43, 2689–2700 (1995)10.1016/0956-7151(94)00489-5 ↗
23. M.A. Razzak, M. Perez, T. Sourmail, S. Cazottes, M. Frotey, ISIJ Int. 52, 2278–2282 (2012)10.2355/isijinternational.52.2278 ↗
24. G.C. Abbruzzese, C. Forzanti, Mater. Sci. Forum 706–709, 1355–1360 (2012)10.4028/www.scientific.net/MSF.706-709.1355 ↗
25. G.C. Abbruzzese, J. Phys. Conf. Ser. 1270, 012036 (2019)10.1088/1742-6596/1270/1/012036 ↗
26. P.R. Rios, Acta Mater. 45, 1785–1789 (1997)10.1016/S1359-6454(96)00284-4 ↗
27. N. Lu, J. Kang, N. Senabulya, R. Keinan, N. Gueninchault, A.J. Shahani, Acta Mater. 195, 1–12 (2020)10.1016/j.actamat.2020.04.049 ↗
28. C. Gini, Riv. polit. econ. 87, 769–790 (1997)
29. C. Gini: Variabilità e mutabilità (1912).
30. W.J. Carrington, K.R. Troske, J. Bus. Econ. Stat. 15, 402–409 (1997)10.1080/07350015.1997.10524718 ↗
31. S.J. Rey, R.J. Smith, Lett. Spat. Resour. Sci. 6, 55–70 (2013)10.1007/s12076-012-0086-z ↗
32. Z.I. Botev, J.F. Grotowski, D.P. Kroese, Ann. Stat. 38, 2916–2957 (2010)10.1214/10-AOS799 ↗
33. R.W. Balluffi, Kinetics of Materials (Wiley, Hoboken, NJ, 2005).10.1002/0471749311 ↗
34. S. Fujikawa, K. Hirano, J. Jpn Inst. Light Met. 20, 267–277 (1970)10.2464/jilm.20.267 ↗
35. E. Nes, N. Ryum, O. Hunderi, Acta Metall. 33, 11–22 (1985)10.1016/0001-6160(85)90214-7 ↗
36. A.W. Bowen, M.G. Ardakani, J.F. Humphreys, Mater. Sci. Forum 157–162, 919–926 (1994)10.4028/www.scientific.net/MSF.157-162.919 ↗
37. J. Humphreys, G.S. Rohrer, A. Rollett, in Recrystallization and Related Annealing Phenomena, 3rd edn., ed. by J. Humphreys, G.S. Rohrer, A. Rollett (Elsevier, Oxford, 2017), pp. 109–14310.1016/B978-0-08-098235-9.00004-5 ↗
38. S.-J.L. Kang, in Sintering. ed. by S.-J.L. Kang (Butterworth-Heinemann, Oxford, 2005), pp. 117–13510.1016/B978-075066385-4/50009-1 ↗
39. J.O. Andersson, T. Helander, L. Höglund, P. Shi, B. Sundman, CALPHAD 26, 273–312 (2002)10.1016/S0364-5916(02)00037-8 ↗
40. W.F. Smith, J. Hashemi, F. Presuel-Moreno, Foundations of Materials Science and Engineering (McGraw-Hill Publishing, New York, 2006).
41. V. Bezák, Metall. Trans. 3, 1235–1237 (1972)10.1007/BF02642457 ↗
42. H. Fredriksson, U. Åkerlind, Materials Processing During Casting (Wiley, Hoboken, NJ, 2006), pp. 227–25310.1002/9780470017920 ↗
43. S. Nag, Y. Zheng, R.E.A. Williams, A. Devaraj, A. Boyne, Y. Wang, P.C. Collins, G.B. Viswanathan, J.S. Tiley, B.C. Muddle, R. Banerjee, H.L. Fraser, Acta Mater. 60, 6247–6256 (2012)10.1016/j.actamat.2012.07.033 ↗
44. E.M. Lifshitz, L.P. Pitaevskii, Statistical Physics: Theory of the Condensed State (Elsevier, Amsterdam, 2013).
45. X. Wang, Z. Huang, B. Cai, N. Zhou, O. Magdysyuk, Y. Gao, S. Srivatsa, L. Tan, L. Jiang, Acta Mater. 168, 287–298 (2019)10.1016/j.actamat.2019.02.012 ↗
46. S. Birosca, A. Nadoum, D. Hawezy, F. Robinson, W. Kockelmann, Acta Mater. 185, 370–381 (2020)10.1016/j.actamat.2019.12.023 ↗