journal article·2021-02Open access

A Fast-Acting Method for Simulating Precipitation During Heat Treatment of Superalloy 718

S. L. Semiatin, J. S. Tiley, F. Zhang, T. M. Smith, R. Y. Zhang, H. B. Dong, P. Gadaud, J. Cormier

Abstract

A fast-acting, mean-field method for simulating precipitation of the γ′′ and γ′ phases during aging of superalloy 718 following super-delta-solvus solution treatment was formulated and validated using observations in the literature. The approach assumed classical (homogeneous) nucleation and diffusion-controlled growth (N&G) of disk/ellipsoidal-shaped-γ′′ and spherical-γ′ particles. For the γ′′ precipitates in particular, the evolution equations for both nucleation and growth incorporated corrections for the non-spherical shape, assuming a fixed aspect ratio. In addition, special attention was paid to the choice of input material properties for simulations. These parameters included the bulk free energies of transformation, particle-matrix (misfit) elastic strain energy (for γ′′), effective diffusivities, and the γ′′–γ and γ′–γ interface energies. The applicability of the diffusivities and interface energies chosen for the N&G simulations was established by their consistency in replicating previously measured rate constants for the diffusion-controlled coarsening of both γ′′ and γ′. The N&G formulation was discretized to obtain numerical (spreadsheet) solutions via the Kampmann–Wagner approach. Simulation results for the temporal evolution of volume fraction and average size of the precipitates showed good agreement with experimental measurements. The sensitivity of model predictions to various input parameters was also quantified.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. M. J. Donachie: Superalloys: Source Book, ASM International, Materials Park, OH, 1984.
2. Proc. 13th Inter. Symp. on Superalloys, M. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, and S. Tin, eds., TMS, Warrendale, PA, 2016.
3. Proc. 9th Inter. Symposium on Superalloy 718 and Derivatives, E. Ott, X. Liu, J. Andersson, Z. Bi, K. Bockenstedt, I. Dempster, J. Groh, K. Heck, P. Jablonski, M. Kaplan, D. Nagahama, and C. Sudbrack, eds., 2018, TMS, Pittsburgh, PA, 2018.
4. D. Paulonis and J.J. Schirra: in Superalloys 718, 625, 706, and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 2001, pp. 13–23.10.7449/2001/Superalloys_2001_13_23 ↗
5. R.E. Schafrik, D.D. Ward, and J.R. Groh: in Superalloys 718, 625, 706, and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 2001, pp. 1–11.10.7449/2001/Superalloys_2001_1_11 ↗
6. J.W. Brooks and P.J. Bridges: in Superalloys 1988, S. Reichman, D.N. Duhl, G. Mauer, S. Antolovich, and C. Lund, eds., TMS, Warrendale, PA, 1988, pp. 33–42.10.7449/1988/Superalloys_1988_33_42 ↗
7. Oradei-Basile and J.F. Radovich: in Superalloys 718, 625, and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1991, pp. 325–35.10.7449/1991/Superalloys_1991_325_335 ↗
8. C.I. Garcia, D.E. Camus, E.A. Loria, and A.J. DeArdo: in Superalloys 718, 625, and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1991, pp. 925–41.10.7449/1991/Superalloys_1991_925_941 ↗
9. C.I. Garcia, A.K. Lis, E.A. Loria, and A.J. DeArdo: in Superalloys 1992, S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, and D.L. Klarstrom, eds., TMS, Warrendale, PA, 1992, pp. 527–36.10.7449/1992/Superalloys_1992_527_536 ↗
10. H. Chandler: Heat Treater’s Guide: Practices and Procedures for Nonferrous Alloys, ASM International, Materials Park, OH, 1996.
11. C. Slama and G. Cizeron: J. de Physique III, 1997, vol. 7, pp. 665–688.
12. A. Thomas, M. El-Wahabi, J.M. Cabrera, and J.M. Prado: J. Mater. Proc. Technol., vol. 177, 2006, pp. 469–472.10.1016/j.jmatprotec.2006.04.072 ↗
13. R. Cozar and P. Pineau: Metall. Trans., 1973, vol. 4, pp. 47–59.10.1007/BF02649604 ↗
14. M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: Metall. Trans. A, 1992, vol. 23A, pp. 2015–2028.10.1007/BF02647549 ↗
15. R.D. Doherty: in Physical Metallurgy, R.W. Cahn and P. Haasen, eds., North-Holland, Amsterdam, 1996, ch. 15.
16. T.P. Gabb, D.G. Backman, D.Y. Wei, D.P. Mourer, D.U. Furrer, A. Garg, and D.L. Ellis: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, and J.J. Schirra, eds., TMS, Warrendale, PA, 2000, pp. 405–14.10.7449/2000/Superalloys_2000_405_414 ↗
17. H.J. Jou, P.W. Voorhees, and G.B. Olson: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 877–86.10.7449/2004/Superalloys_2004_877_886 ↗
18. G.B. Olson, H.J. Jou, J. Jung, J.T. Sebastian, A. Misra, I. Locci, and D. Hull: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, and S.A. Woodard, eds., TMS, Warrendale, PA, 2008, pp. 923–32.10.7449/2008/Superalloys_2008_923_932 ↗
19. R. Radis, M. Schaffer, M. Albu, G. Kothleitner, P. Polt, and E. Kozeschnik: Acta Mater., 2009, vol. 57, pp. 5739–5747.10.1016/j.actamat.2009.08.002 ↗
20. B. Wang, F. Zhang, W. Cao, S. Chen, and S. Kou: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 115–122.10.1007/s11661-014-2617-2 ↗
21. S.L. Semiatin, S-L. Kim, F. Zhang, and J.S. Tiley: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 1715–1730.10.1007/s11661-015-2748-0 ↗
22. S.L. Semiatin, N.C. Levkulich, and J.S. Tiley: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 5281–5296.10.1007/s11661-019-05422-7 ↗
23. M.J. Anderson, F. Schulz, Y. Lu, H. Kitaguchi, P. Bowen, C. Argyrakis, and H.C. Basoalto: Acta Mater., 2020, vol. 161, pp. 81–100.10.1016/j.actamat.2020.03.058 ↗
24. J.P. Simmons, C. Shen, and Y. Wang: Scripta Mater., 2000, pp. 935–42.10.1016/S1359-6462(00)00517-0 ↗
25. Y.H. Wen, J.P. Simmons, C. Shen, C. Woodward, and Y. Wang: Acta Mater., 2003, vol. 51, pp. 1123–1132.10.1016/S1359-6454(02)00516-5 ↗
26. M. Fleck, F. Schleifer, M. Holzinger, and U. Glatzel: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4146–4157.10.1007/s11661-018-4746-5 ↗
27. I.J. Moore, M.G. Burke, and E.J. Palmiere: Acta Mater., 2016, vol. 119, pp. 157–166.10.1016/j.actamat.2016.08.027 ↗
28. R. Radis, G.A. Zickler, M. Stockinger, C. Sommitsch, and E. Kozeschnik: in Proc. 7th International Sympsium on Superalloy 718 and Derivatives, E.A. Ott, J.R. Groh, A. Banik, I. Dempster, T.P. Gabb, R. Helmink, X. Liu, A. Mitchell, G.P. Sjoberg, and A. Wusatowska-Sarnek, eds., TMS, Warrendale, PA, 2010, pp. 569–78.
29. D. Furrer, V. Venkatesh, F. Zhang, D. Gynther, T. Asare, D. Novikov, and S. Burlatsky: in Proc. 8th International Sympsium on Superalloy 718 and Derivatives, E.A. Ott, A. Banik, X. Liu, I. Dempster, K. Heck, J. Andersson, J. Groh, T. Gabb, R. Helmink, and A. Wusatowska-Sarnek, eds., TMS, Warrendale, PA, 2014, pp. 81–94.
30. F. Zhang, W. Cao, C. Zhang, S. Chen, J. Zhu, and D. Lv; in Proceedings, 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications, E. Ott, ed., TMS, Pittsburgh, 2018, pp. 147–61.10.1007/978-3-319-89480-5_8 ↗
31. A. Drexler, B. Oberwinkler, S. Primig, C. Turk, E. Povoden-Karadeniz, A. Heinemann, W. Ecker, and M. Stockinger: Mater. Sci. Eng. A, 2018, vol. A723, pp. 314–323.10.1016/j.msea.2018.03.013 ↗
32. Z.K. Low, T. Chaise, D. Bardel, S. Cazottes, P. Chaudet, M. Perez, and D. Nelias: Acta Mater., 2018, vol. 156, pp. 31–42.10.1016/j.actamat.2018.06.005 ↗
33. H.I. Aaronson and F.K. LeGoues: Metall. Trans. A, 1992, vol. 23, pp. 1915–1945.10.1007/BF02647541 ↗
34. S.Q. Xiao and P. Haasen: Acta Metall. et Mater., 1991, vol. 39, pp. 651–659.10.1016/0956-7151(91)90133-L ↗
35. J.W. Christian: Acta Metall., 1958, vol. 6, pp. 377–379.10.1016/0001-6160(58)90077-4 ↗
36. K.S. Chan, J.K. Lee, G.J. Shiflet, K.C. Russell, and H.I. Aaronson: Metall. Trans. A, 1978, vol. 9A, pp. 1016–1017.10.1007/BF02649849 ↗
37. L. Kampmann and M. Kahlweit: Berichte der Bunsen-Gesellschaft Physikalische Chemie, 1970, vol. 94, pp. 456–462.10.1002/bbpc.19700740508 ↗
38. C. Zener: J. Appl Phys., 1949, vol. 20, pp. 950–953.10.1063/1.1698258 ↗
39. H.B. Aaron, D. Fainstein, and G.R. Kotler: J. Appl. Physics, 1970, vol. 41, pp. 4404–4410.10.1063/1.1658474 ↗
40. O. Grong and H.R. Shercliff: Progress in Materials Science, 2002, vol. 47, pp. 163–282.10.1016/S0079-6425(00)00004-9 ↗
41. F.S. Ham: J. Phys. Chem. Solids, 1958, vol. 6, pp. 335–351.10.1016/0022-3697(58)90053-2 ↗
42. G. Horvay and J.W. Cahn: Acta Metall., 1961, vol. 9, pp. 695–705.10.1016/0001-6160(61)90008-6 ↗
43. M. Ferrante and R.D. Doherty: Acta Metall., 1979, vol. 27, pp. 1603–1614.10.1016/0001-6160(79)90043-9 ↗
44. S.L. Semiatin, T.M. Lehner, J.D. Miller, R.D. Doherty, and D.U. Furrer: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 910–921.10.1007/s11661-007-9088-7 ↗
45. M. Perez: Scripta Mater., 2005, vol. 52, pp. 709–712.10.1016/j.scriptamat.2004.12.026 ↗
46. I.M. Lifshitz and V.V. Slyozov: J. Phys. Chem. Solids, 1961, vol. 19, pp. 35–51.10.1016/0022-3697(61)90054-3 ↗
47. C. Wagner: Zeit. Elektrochem., 1961, vol. 65, pp. 581–591.
48. H. A. Calderon, P.W. Voorhees, J.L. Murray, and G. Kostorz: Acta Metall. et Mater., 1994, vol. 42, pp. 991–1000.10.1016/0956-7151(94)90293-3 ↗
49. P.W. Voorhees and M.E. Glicksman: Acta Metall., 1984, vol. 32, pp. 2013–2030.10.1016/0001-6160(84)90181-0 ↗
50. J.D. Boyd and R.B. Nicholson: Acta Metall., 1971, vol. 19, pp. 1379–1391.10.1016/0001-6160(71)90076-9 ↗
51. C.J. Kuehmann and P.W. Voorhees: Metall. and Mater. Trans A, 1996, vol. 27A, pp. 937–943.10.1007/BF02649761 ↗
52. Y.F. Han: M.S. Thesis, University of Manitoba, Winnipeg, Canada, 1981.
53. Y.F. Han, P. Deb, M.C. Chaturvedi: Metal Sci., 1983, vol, 16, pp. 555–561.10.1179/030634582790427118 ↗
54. R.B. Li, M. Yao, W.C. Liu, and X.C. He: Scripta Mater., 2002, vol. 46, pp. 635–638.10.1016/S1359-6462(02)00041-6 ↗
55. X. Xie, J. Dong, G. Wang, and W You: in Superalloys 718, 625, 706, and Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 2005, pp. 287–98.10.7449/2005/Superalloys_2005_287_298 ↗
56. T.M. Smith, N.M. Senanayake, C.K. Sudbrack, P. Bonacuse, R.B. Rogers, P. Chao, and J. Carter: Mater. Characterization, 2019, vol. 148, pp. 17810.1016/j.matchar.2018.12.018 ↗
57. R.Y. Zhang, H.L. Qin, Z.N. Bi, J. Li, S. Paul, T.L. Lee, B. Nenchev, J. Zhang, S. Kabra, J.F. Kelleher, and H.B. Dong: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 5421–5432.10.1007/s11661-019-05393-9 ↗
58. R. Lawitzki, S. Hassan, L. Karge J. Wagner, D. Wang, J. von Kobylinski, C. Krempaszky, M. Hofmann, R. Gilles, and G. Schmitz: Acta Mater., 2019, vol. 163, pp. 28–39.10.1016/j.actamat.2018.10.014 ↗
59. M.K. Miller, S.S. Babu, and M.G. Burke: Mater. Sci. Eng. A, 2002, vol. A327, pp. 84–88.10.1016/S0921-5093(01)01881-0 ↗
60. A. Devaux, L. Naze, R. Molins, A. Pineau, A. Organista, J.Y. Guedou, J.F. Uginet, and P. Heritier: Mater. Sci. Eng. A, 2008, vol. A486, pp. 117–122.10.1016/j.msea.2007.08.046 ↗
61. R.Y. Zhang, H.L. Qin, Z.N. Bi, J. Li, S. Paul, T.L. Lee, S.Y. Zhang, J. Zhang, and H.B. Dong: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 1860–1873.10.1007/s11661-020-05627-1 ↗
62. C.E. Campbell, J.C. Zhao, and M.F. Henry: J. Phase Equilibria and Diffusion, 2004, vol. 25, pp. 6–15.10.1007/s11669-004-0167-9 ↗
63. M.S.A. Karunaratne, D.C. Cox, P. Carter, and R.C. Reed: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, and J.J. Schirra, eds., TMS, Warrendale, PA, 2000, pp. 263–72.10.7449/2000/Superalloys_2000_263_272 ↗
64. S.L. Semiatin, N.C. Levkulich, A.R.C. Gerlt, E.J. Payton, J.S. Tiley, F. Zhang, R.A. MacKay, R.V. Miner, and T.P. Gabb: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 2289–2301.10.1007/s11661-018-05104-w ↗
65. M. Dayananda: Mater. Sci. Eng. A, 1989, vol. A121, pp. 351–359.10.1016/0921-5093(89)90787-9 ↗
66. G. Xu, Y. Liu, and Z. Kang: Metall. Mater. Trans. B, 2016, vol. 47B, pp. 3126–3133.10.1007/s11663-016-0726-6 ↗
67. J.A. Nesbitt and R.W. Heckel: Metall. Trans. A, 1987, vol. 18A, pp. 2061–2073.10.1007/BF02647078 ↗
68. K. Kulkarni, G.P.S. Chauhan: AIP Advances, 2015, vol. 5 (097162), pp. 1–7.
69. C.K. Sudbrack, R.D. Noebe, D.N. Seidman: Acta Mater. 2007, vol. 55, pp. 119–130.10.1016/j.actamat.2006.08.009 ↗
70. S.L. Semiatin, F. Zhang, R. Larsen, L.A. Chapman, and D.U. Furrer: Integrating Mater. Mfg. Innovation, 2016, vol. 5, no. 3, pp. 1–20.
71. R. Wagner and R. Kampmann: in Materials Science and Technology, Vol. 5, P. Haasen, ed., VCH, Weinheim, Germany, 1991, pp. 213–303.
72. M. Perez, M. Dumont, and D. Acevedo-Reyes: Acta Mater., 2008, vol. 56, pp. 2119–2132.10.1016/j.actamat.2007.12.050 ↗
73. J. Cormier, P. Gadaud, M. Czaplicki, R.Y. Zhang, H.B. Dong, T.M. Smith, F. Zhang, J.S. Tiley, and S.L. Semiatin: Metall. Mater. Trans. A, 2020, in press.
74. D. Bardel, M. Perez, D. Nelias, A. Deschamps, C.R. Hutchinson, D. Maisonette, T. Chaise, J. Garnier, and F. Bourlier: Acta Mater., 2014, vol. 62, pp. 129–140.10.1016/j.actamat.2013.09.041 ↗
75. D. den Ouden, L. Zhao, C. Vuik, J. Sietsma, and F.J. Vermolen: Comp. Mater. Sci., 2013, vol.79, pp. 933–43.10.1016/j.commatsci.2013.07.047 ↗