Effect of Yttrium Additions in Relation to Oxygen Content on Glass Formation in the Zr50Cu40Al10 Alloy
Source abstract
Abstract
Abstract The effect of yttrium additions on the glass formation of the Zr50Cu40Al10 alloy with high oxygen content was investigated. Unlike other reports showing the positive effect of alloying Zr-based alloys with a few percent of rare earth elements, we examined the Y-to-oxygen ratios. As calculated, a stoichiometric amount of yttrium (2808 at ppm) is required to bind all the oxygen (4212 at ppm) to form the Y2O3. Additionally, the influence of half (1404 at ppm) and double stoichiometric (5616 at ppm) levels of yttrium, with respect to the measured oxygen content to be bound was evaluated. The Y-doped alloys were synthesized by arc melting, followed by suction casting into copper molds with conical and rod cavities. The critical diameter of the undoped alloy was below 3 mm, while stoichiometric and double stoichiometric yttrium concentrations allowed to obtain 5 and 7 mm diameter glassy samples, respectively. Microstructure observations confirmed the scavenging effect of yttrium, leading to the formation of a cubic ($$ Ia\bar{3} $$ space group) yttrium sesquioxide. The glass forming ability of the alloys was additionally determined based on differential thermal analysis, allowing to propose the best indicator for the studied Zr-Cu-Al alloys.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. [1] A. Inoue and A. Takeuchi: Acta Mater., 2011, vol. 59, pp. 2243–67.10.1016/j.actamat.2010.11.027 ↗
2. [2] E. Axinte: Mater. Des., 2012, vol 35, pp. 518–56.10.1016/j.matdes.2011.09.028 ↗
3. [3] J. Schroers, G. Kumar, T.M. Hodges, S. Chan and T.R. Kyriakides: JOM., 2009, vol 61, pp. 21–29.10.1007/s11837-009-0128-1 ↗
4. [4] K. Pajor, T. Kozieł, G. Cios, P. Błyskun, P. Bała and A. Zielińska-Lipiec: J. Non. Cryst. Solids., 2018, vol 496, pp. 42–47.10.1016/j.jnoncrysol.2018.05.034 ↗
5. [5] X.H. Lin, W.L. Johnson and W.K. Rhim: Mater. Trans. JIM., 1997, vol 38, pp. 473–77.10.2320/matertrans1989.38.473 ↗
6. [6] P. Błyskun, T. Kozieł, K. Pajor, P. Maj and T. Kulik: J. Non. Cryst. Solids., 2019, vol 509, pp. 80–87.10.1016/j.jnoncrysol.2019.01.026 ↗
7. N.D. De Campos Neto, F.S. Pereira, S.G. Antonio, Y. Guo, A.J. Clarke, M.J. Kaufman and M.F. De Oliveira (2019) Mater. Charact., vol 158, pp. 1-7.10.1016/j.matchar.2019.109932 ↗
8. [8] C.A. Teixeira, R.V. da Silva, L.T. Pereira, M.F. de Oliveira: J. Non. Cryst. Solids., 2020, vol 535, art. no. 119966.10.1016/j.jnoncrysol.2020.119966 ↗
9. [9] C.T. Liu, M.F. Chisholm and M.K. Miller: Intermetallics, 2002, vol 10, pp. 1105–12.10.1016/S0966-9795(02)00131-0 ↗
10. [10] Z.H. Han, L. He, Y.L. Hou, J. Feng and J. Sun: Intermetallics, 2009, vol 17, pp. 553–61.10.1016/j.intermet.2009.01.011 ↗
11. [11] J.L. Cheng, G. Chen, Z.W. Zhang, Z.Z. Wang, Z.Y. Wang and X.Q. Li: Intermetallics, 2014, vol 49, pp. 149-53.10.1016/j.intermet.2014.01.002 ↗
12. [12] Y. Yokoyama, T. Shinohara, K. Fukaura and A. Inoue: Mater. Trans., 2004, vol 45, pp. 1819–23.10.2320/matertrans.45.1819 ↗
13. [13] J.P. Abriata, J. Garces and R. Versaci: Bull. Alloy Phase Diagrams, 1986, vol 7, pp. 116–24.10.1007/BF02881546 ↗
14. [14] H. Bo, J. Wang, S. Jin, H.Y. Qi, X.L. Yuan, L.B. Liu and Z.P. Jin: Intermetallics, 2010, vol 18, pp. 2322–27.10.1016/j.intermet.2010.08.002 ↗
15. [15] K.T. Park, T.H. Lee, N.C. Jo, H.H. Nersisyan, B.S. Chun, H.H. Lee and J.H. Lee: J. Nucl. Mater., 2013, vol 436, pp. 130–38.10.1016/j.jnucmat.2013.01.310 ↗
16. [16] Y. Zhang, M.X. Pan, D.Q. Zhao, R.J. Wang and W.H. Wang: Mater. Trans. JIM., 2000, vol 41, pp. 1410–14.10.2320/matertrans1989.41.1410 ↗
17. [17] W.H. Wang: Prog. Mater. Sci., 2007, vol 52, pp. 540–96.10.1016/j.pmatsci.2006.07.003 ↗
18. [18] X.I.E. Zhiwei, Z. Yongzhang, Y. Yuanzheng, C. Xianzhao, T.A.O. Pingjun, Z. Xie, Y. Zhang, Y. Yang, X. Chen and P. Tao: Rare Met., 2010, vol 29, pp. 444–50.10.1007/s12598-010-0147-7 ↗
19. [19] A.A. Kündig, D. Lepori, A.J. Perry, S. Rossmann, A. Blatter, A. Dommann and P.J. Uggowitzer: Mater. Trans., 2002, vol 43, pp. 3206–10.10.2320/matertrans.43.3206 ↗
20. [20] J. Luo, H. Duan, C. Ma, S. Pang and T. Zhang: Mater. Trans., 2006, vol 47, pp. 450–53.10.2320/matertrans.47.450 ↗
21. [21] J. Zhu, C. Wang, J. Han, S. Yang, G. Xie, H. Jiang, Y. Chen and X. Liu: Intermetallics, 2018, vol 92, pp. 55–61.10.1016/j.intermet.2017.08.018 ↗
22. [22] J. Chen, Y. Zhang, J.P. He, K.F. Yao, B.C. Wei and G.L. Chen: Scr. Mater., 2006, vol 54, pp. 1351–55.10.1016/j.scriptamat.2005.12.002 ↗
23. F. Sikan, B. Yasar and I. Kalay: Metall. Mater. Trans. A 2018, vol 49A, pp. 1328-35.10.1007/s11661-018-4482-x ↗
24. [24] M. Malekan, R. Rashidi and S.G. Shabestari: Vacuum, 2020, vol 174, art. no. 109223.10.1016/j.vacuum.2020.109223 ↗
25. [25] S.W. Neale, R. Neelameggham, S. Alam, H. Oosterhof, A.A. Jha and D. Dreisinger, Rare Metal Technology, Wiley, Hoboken, 2014.
26. R.A. Robie, B.S. Hemingway, and J.R. Fisher: Thermodynamic properties of minerals and related substances at 298.15 K and 1 Bar pressure and at higher temperatures, United States Government Printing Office, Washington, 1978.
27. [27] M. Zinkevich: Prog. Mater. Sci., 2007, vol 52, pp. 597–647.10.1016/j.pmatsci.2006.09.002 ↗
28. [28] I. Halevy, R. Carmon, M.L. Winterrose, O. Yeheskel, E. Tiferet and S. Ghose: J. Phys. Conf. Ser., 2010, vol 215, pp. 1–8.
29. K.J. Laws, B. Gun and M. Ferry: Metall. Mater. Trans. A , 2009, vol 40, pp. 2377–87.10.1007/s11661-009-9929-7 ↗
30. [30] A. Inoue, T. Zhang and T. Masumoto: J. Non. Cryst. Solids., 1993, vol 156–158, pp. 473–80.10.1016/0022-3093(93)90003-G ↗
31. [31] Z.P. Lu, Y. Li and S.C. Ng: J. Non. Cryst. Solids., 2000, vol 270, pp. 103–14.10.1016/S0022-3093(00)00064-8 ↗
32. [32] Z.P. Lu and C.T. Liu: Acta Mater., 2002, vol 50, pp. 3501–12.10.1016/S1359-6454(02)00166-0 ↗
33. [33] X.H. Du, J.C. Huang, C.T. Liu and Z.P. Lu: J. Appl. Phys., 2007, vol 101, pp. 23–25.
34. [34] P. Błyskun, P. Maj, M. Kowalczyk, J. Latuch and T. Kulik: J. Alloys Compd., 2014, vol 625, pp. 13–17.10.1016/j.jallcom.2014.11.112 ↗
35. [35] Z. Long, W. Liu, M. Zhong, Y. Zhang, M. Zhao, G. Liao and Z. Chen: J. Therm. Anal. Calorim., 2018, vol 132, pp. 1645–60.10.1007/s10973-018-7050-0 ↗
36. [36] K.K. Song, S. Pauly, Y. Zhang, P. Gargarella, R. Li, N.S. Barekar, U. Kühn, M. Stoica and J. Eckert: Acta Mater., 2011, vol 59, pp. 6620–30.10.1016/j.actamat.2011.07.017 ↗
37. [37] B. Escher, U. Kühn, J. Eckert, C. Rentenberger and S. Pauly: Mater. Sci. Eng. A., 2016, vol 673, pp. 90–98.10.1016/j.msea.2016.06.081 ↗
38. [38] J. Perepezko, C. Santhaweesuk, J. Wang, S.D. Imhoff: J. Alloys Compd., 2014, vol 615, pp. S192-9710.1016/j.jallcom.2013.11.220 ↗