journal article·2020-08

Hardening Through an Ultrafine Carbide Precipitation in Austenite of a Low-Carbon Steel Containing Titanium and Tungsten

Zhenqiang Wang, Jiandong Wang, Haokai Dong, Yanyuan Zhou, Fengchun Jiang

Publisher page

Abstract

In this study, a significant hardening effect was obtained in a low-carbon steel containing Ti and W by performing a 20 pct hot compressive deformation and 60 seconds stress relaxation at 1148 K to 1198 K (875 °C to 925 °C) in the austenite region. TEM observation indicated that the hardening effect in martensite and bainite was closely associated with a fine dispersion of ultrafine precipitates with particle size of 1 to 10 nm at peak hardness. These ultrafine precipitates were identified as W, Fe-rich (WFeTi)C carbides with MC-type B1 structure, the crystal parameter of which is quite similar to austenite matrix. The precipitation mechanism of these ultrafine particles is discussed and the strength increment from precipitation hardening is estimated by applying a structure-based strength model and microstructure characterization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Q. L. Yong: Microalloyed Steels-Physical and Mechanical Metallurgy, Metall. Industry Press, Beijing, 1989.
2. Q. L. Yong: Secondary Phases in Steels, Metallurgical Industry Press, Beijing, 2006.
3. X. P. Mao, X. D. Huo, X. J. Sun, and Y. Z. Chai: J. Mater. Proc. Technol., 2010, vol. 210, pp. 1660-66.10.1016/j.jmatprotec.2010.05.018 ↗
4. J. Moon, C. Lee, S. Uhm, and J. Lee: Acta Mater., 2006, vol. 54, pp. 1053-61.10.1016/j.actamat.2005.10.037 ↗
5. B. Dutta, E. J. Palmiere, and C. M. Sellars: Acta Mater., 2001, vol. 49, pp. 785-94.10.1016/S1359-6454(00)00389-X ↗
6. V. Rajinikanth, T. Kumar, and B. Mahato: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 5816-38.10.1007/s11661-019-05488-3 ↗
7. S. F. Medina, A. Quispe, and M. Gomez: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 1524-39.10.1007/s11661-013-2068-1 ↗
8. Q. L. Yong, and L. Zheng: Acta Metall. Sinica, 1984, vol. 20, pp. 9-16.
9. Y. Funakawa, T. Shiozaki, and K. Tomita: ISIJ Int., 2004, vol. 44, pp. 1945-51.10.2355/isijinternational.44.1945 ↗
10. Y. W. Kim, S. W. Song, and S. J. Seo: Mater. Sci. Eng. A, 2013, vol. 565, pp. 430-38.10.1016/j.msea.2012.12.055 ↗
11. G.H. Gao: PhD thesis, Tsinghua University, Beijing, 2012.
12. N. Kamikawa, Y. Abe, G. Miyamoto, Y. Funakawa, and T. Furuhara: ISIJ Int., 2014, vol. 54, pp. 212-21.10.2355/isijinternational.54.212 ↗
13. R. Okamoto, A. Borgenstam, and J. Agren: Acta Mater., 2010, vol. 58, pp. 4783-90.10.1016/j.actamat.2010.05.014 ↗
14. H. W. Yen, P. Y. Chen, and C. Y. Huang: Acta Mater., 2011, vol. 59, pp. 6264-74.10.1016/j.actamat.2011.06.037 ↗
15. P. Gong, X. G. Liu, A. Rijkenberg, and W. M. Rainforth: Acta Mater., 2018, vol. 161, pp. 374-87.10.1016/j.actamat.2018.09.008 ↗
16. E. Chandiran, Y. Sato, N. Kamikawa, G. Miyamoto, and T. Furuhara: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 4111–26.10.1007/s11661-019-05353-3 ↗
17. T. P. Wang, F. H. Kao, and S. H. Wang: Mater. Letters, 2011, vol. 65, pp. 396-99.10.1016/j.matlet.2010.10.022 ↗
18. K. Zhang, Z. D. Li, and Z. Q. Wang: J. Mater. Research, 2016, vol. 31, pp. 1254-63.10.1557/jmr.2016.154 ↗
19. M. G. Akben, T. Chandra, and P. Plassiard: Acta Metall, 1984, vol. 32, pp. 591-601.10.1016/0001-6160(84)90070-1 ↗
20. Z. Q. Wang, X. J. Sun, and Z. G. Yang: Mater. Sci. Eng. A, 2013, vol. 573, pp. 84-91.10.1016/j.msea.2013.02.056 ↗
21. Z. Q. Wang, H. Chen, Z. G. Yang, and F. C. Jiang, Metall. Mater. Trans. A, 2018, vol. 49A, pp. 1455-59.10.1007/s11661-018-4552-0 ↗
22. W. J. Liu, and J. J. Jonas: Metall Trans A, 1988, vol. 19A, pp. 1403-13.10.1007/BF02674014 ↗
23. A. Pandit, A. Murugaiyan, and A. S. Podder: Scripta Mater., 2005, vol. 53, pp. 1309-14.10.1016/j.scriptamat.2005.07.003 ↗
24. Z. M. Wang, X. Y. Zhu, and W. Q. Liu: Chinese J. Mater. Research, 2010, vol. 24, pp. 217-22.
25. J. H. Jang, C. H. Lee, Y.U. Heo, and D.W. Suh, Acta Mater., 2012, vol. 60, pp. 208-17.10.1016/j.actamat.2011.09.051 ↗
26. D. Poddar, P. Cizek, H. Beladi, and P. D. Hodgson: Acta Mater., 2014, vol. 80, pp. 1-15.10.1016/j.actamat.2014.07.035 ↗
27. E. J. Pavlina, J. G. Speer, and T. C. J. Van: Scripta Mater., 66 (2012) 243-46.10.1016/j.scriptamat.2011.10.047 ↗
28. E. Hornbogen, and E. A. Starke: Acta Metall. Mater., 1993, vol. 41, pp. 1-16.10.1016/0956-7151(93)90334-O ↗
29. L. García-Sesma, B. López, and B. Pereda: Mater. Sci. Eng. A, 2019, vol. 748, pp. 386-95.10.1016/j.msea.2019.01.105 ↗
30. M. Zhang, Y. H. Wang, and C. L. Zheng: Mater. Sci. Eng. A, 2014, vol. 596, pp. 9-14.10.1016/j.msea.2013.11.097 ↗
31. Z. Y. Zhang, X. J. Sun, and Z. D. Li: Chinese J. Mater. Research, 2015, vol. 29, pp. 269-76.
32. Z. L Guo, and W. Sha: Mater Trans A, 2002, vol. 43, pp. 1273-82.10.2320/matertrans.43.1273 ↗
33. A. J. Kulkarni, and K. Krishnamurthy: J. Mater. Res., 2004, vol. 19, pp. 2765-73.10.1557/JMR.2004.0364 ↗