Tensile Behavior of Air Plasma Spray MCrAlY Coatings: Role of High Temperature Agings and Process Defects
Source abstract
Abstract
$$\beta $$-$$\gamma $$ MCrAlY coatings generally exhibit a brittle mechanical behavior below 600 °C. When exposed at elevated temperatures, the microstructure of such coatings evolves, leading to an increasing content of $$\gamma $$ phase, i.e., the ductile phase, and a decreasing content of $$\beta $$ phase, i.e., the brittle phase. Therefore, the evolution of the mechanical properties of such environment-protective materials is worth of investigation. In the present study, a $$\beta $$-$$\gamma $$ NiCoCrAlY coating was processed by air plasma spray (APS) technology. $$150\,\mu \text {m}$$-thin freestanding specimens were prepared then aged in an oxidative atmosphere at high temperatures (950 oC up to 1150 oC) for different durations to simulate in-service degradation of the coatings. Microtensile testings were conducted at room temperature for all the aging variants and the mechanical properties of the aged specimens were found to evolve as follows: (i) an increase in both Young’s modulus and tensile strength and a loss in ductility for aging temperatures below 1050 °C, (ii) a decrease in Young’s modulus and a gain in ductility for aging temperatures above 1050 °C, and (iii) a significant scatter in mechanical properties for high temperature agings. The low ductility observed for high temperature agings was related to intruded oxides developing during the aging treatment, heterogeneously distributed in the volume of the coating. The gain in ductility was mainly attributed to the $$\beta $$-phase decrease, the loss in interconnection between $$\beta $$ phases compared to the as-received microstructure and a topological inversion of the $$\beta $$-$$\gamma $$ microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. J. L. Chaboche, F. Gallerneau: Fatigue Fract. Eng. Mater. Struct. 2001, vol. 24 (6), pp. 405–418.10.1046/j.1460-2695.2001.00415.x ↗
2. R. Reed: The Superalloys: Fundamentals and Applications: Cambridge University Press, 2008.
3. M. Bensch, C. Konrad, E. Fleischmann, C. Rae, U. Glatzel: Mater. Sci. Eng. A 2013, vol. 577, pp. 179–188.10.1016/j.msea.2013.04.032 ↗
4. R. Mévrel: Mater. Sci. Eng. A 1989, vol. 120-121, pp. 13–24.10.1016/0921-5093(89)90713-2 ↗
5. T. Rhys-Jones: . Corros. Sci. 29:623-646. 1989.10.1016/0010-938X(89)90104-2 ↗
6. S. Bose: High Temperature Coatings: 1st Edition: Vol. 81: Butterworth-Heinemann, 2007.
7. A. Strang, E. Lang: . In: R. Brunetaud, D. Coutsouradis, T. Gibbons, Y. Lindblom, D. Meadowcroft, R. Stickler (Eds.), High Temperature Alloys for Gas Turbines. Springer, Springer. 1982. pp. 469–506.
8. K. Schneider, H. Grünling (1983) Thin Solid Films 107(4): 395-416.10.1016/0040-6090(83)90302-4 ↗
9. J. Veys, R. Mévrel: Mater. Sci. Eng. 88 (1988), pp. 253-26010.1016/0025-5416(87)90093-0 ↗
10. D. Texier: Measurement and Evolution of the Gradient of Mechanical Properties in MCrAlY Coated MC2 Nickel Based Superalloy System. Dissertation, Université de Toulouse, Toulouse, 2013.
11. K. Hemker, B. Mendis, C. Eberl: Mater. Sci. Eng. A 2008, vol. 483-484, pp. 727–730.10.1016/j.msea.2006.12.169 ↗
12. D. Texier, D. Monceau, Z. Hervier, E. Andrieu: Surf. Coat. Technol. 2016, vol. 307, pp. 81–90.10.1016/j.surfcoat.2016.08.059 ↗
13. D. Texier, D. Monceau, F. Crabos, E. Andrieu: Surf. Coat. Technol. 2017, vol. 326, pp. 28–36.10.1016/j.surfcoat.2017.07.026 ↗
14. H. Chen, T. Hyde: Mater. Sci. Eng. A 2017, vol. 680, pp. 203–09.10.1016/j.msea.2016.10.097 ↗
15. T. Fiedler, H.-R. Sinning, J. Rösler, M. Bäker: Surf. Coat. Technol. 2018, vol. 349, pp. 32 – 36.10.1016/j.surfcoat.2018.05.062 ↗
16. G. Jackson, W. Sun, D. McCartney: Mater. Sci. Eng. A 2019, vol. 754, pp. 479 – 490.10.1016/j.msea.2019.03.108 ↗
17. M. Hebsur, R. Miner: Mater. Sci. Eng. 1986, vol. 83, pp. 239–245.10.1016/0025-5416(86)90341-1 ↗
18. J. Nicholls: JOM 2000, vol. 52 (1), pp. 28–35.10.1007/s11837-000-0112-2 ↗
19. E. Chataigner, L. Remy: Thermomechanical fatigue behaviour of coated and bare nickel-based superalloy single crystals. In: M. Verrilli, M. Castelli (Eds.), Thermomechanical Fatigue Behavior of Materials, Vol 2. ASTM International, West Conshohocken, 1996. pp. 3–26.10.1520/STP16443S ↗
20. T. Pollock, B. Laux, C. Brundidge, A. Suzuki, M. He: J. Am. Ceram. Soc. 2011, vol. 94 (S1), pp. s136–s145.10.1111/j.1551-2916.2011.04578.x ↗
21. R. Subramanian, Y. Mori, S. Yamagishi, M. Okazaki: Metall. Mater. Trans. A 2015, vol. 46A (9), pp. 3999–4012.10.1007/s11661-015-2996-z ↗
22. P. Sallot, V. Maurel, L. Rémy, F. NGuyen, A. Longuet: Metall. Mater. Trans. A 2015, vol. 46A (10), pp. 4589–4600.10.1007/s11661-015-2857-9 ↗
23. M. Z. Alam, C. Parlikar, D. Chatterjee, D. K. Das: Mater. Des. 2017, vol. 114, pp. 505–514.10.1016/j.matdes.2016.10.069 ↗
24. V. A. Esin, V. Maurel, P. Breton, A. Köster, S. Selezneff: Acta Mater. 2016, vol. 105, pp. 505–518.10.1016/j.actamat.2015.12.008 ↗
25. M. P. Taylor, H. E. Evans, E. P. Busso, Z. Q. Qian: Acta Mater. 2006, vol. 54 (12), pp. 3241–3252.10.1016/j.actamat.2006.03.010 ↗
26. R. Hüttner, J. Gabel, U. Glatzel, R. Völkl: Mater. Sci. Eng. A 2009, vol. 510-511, pp. 307–311.10.1016/j.msea.2008.10.057 ↗
27. M. Eskner, R. Sandstrom: Surf. Coat. Technol. 2003, vol. 165, pp. 71–80.10.1016/S0257-8972(02)00702-8 ↗
28. K. Hemker, W. Sharpe: Annu. Rev. Mater. Res. 2007, vol. 37 (1), pp. 93–126.10.1146/annurev.matsci.36.062705.134551 ↗
29. D. Gianola, C. Eberl: JOM 2009, vol. 61 (3), pp. 24–35.10.1007/s11837-009-0037-3 ↗
30. M. Z. Alam, S. Kamat, V. Jayaram, D. Das: Acta Mater. 2014, vol. 67, pp. 278–296.10.1016/j.actamat.2013.12.033 ↗
31. D. Texier, D. Monceau, J. C. Salabura, R. Mainguy, E. Andrieu: Mater. High Temp. 2016, vol. 33 (4-5), pp. 325–337.10.1080/09603409.2016.1182250 ↗
32. D. Texier, D. Monceau, S. Selezneff, A. Longuet, E. Andrieu: Metall. Mater. Trans. A 2020, vol. 51A, pp. 1475–1480.10.1007/s11661-020-05634-2 ↗
33. S. Saeidi, K. T. Voisey, D. G. McCartney: J. Therm. Spray Technol. 2011, vol. 20 (6), pp. 1231–1243.10.1007/s11666-011-9666-5 ↗
34. D. Pan, M. Chen, P. Wright, K. Hemker: Acta Mater. 2003, vol. 51 (8), pp. 2205–2217.10.1016/S1359-6454(03)00014-4 ↗
35. C. Eberl, D. Gianola, K. Hemker: Exp. Mech. 2010, vol. 50 (1), pp. 85–97.10.1007/s11340-008-9187-4 ↗
36. C. Eberl, R. Thomson, D. Gianola, S. Bundschuh: Digital Image Correlation and Tracking—File Exchange—MATLAB Central https://uk.mathworks.com/matlabcentral/fileexchange/50994-digital-image-correlation-and-tracking, 2010.
37. Praxair Surface Technologies: http://www.praxairsurfacetechnologies.com/components-materials-and-equipment/materials/thermal-spray-powders/mcraly, 2019.
38. T. Kennerknecht: Fatigue of Micro Molded Materials—Aluminum Bronze and Yttria Stabilized Zirconia: Ph.D. thesis: Fraunhofer Institut fr Werkstoffmechanik, 2014.
39. S. A. Slaby, O. Kraft, C. Eberl: Fatigue Fract. Eng. Mater. Struct. 2016, vol. 39 (6), pp. 780–789.10.1111/ffe.12416 ↗
40. D. Knetsch, M. Funk, T. Kennerknecht, C. Eberl: Mater. Test. 2014, vol. 56 (7-8), pp. 535–541.10.3139/120.110594 ↗
41. S. Fliegener, T. Kennerknecht, M. Kabel: Composites B 2017, vol. 112, pp. 327–343.10.1016/j.compositesb.2016.12.051 ↗
42. J. Schindelin, I. Arganda-Carreras, E. Frise, V. Kaynig, M. Longair, T. Pietzsch, S. Preibisch, C. Rueden, S. Saalfeld, B. Schmid, J.-Y. Tinevez, D. James White, V. Hartenstein, K. Eliceiri, P. Tomancak, A. Cardona: Nat. Methods 2012, vol. 9 (7), pp. 676–682.10.1038/nmeth.2019 ↗
43. M. Fukuhara, I. Yamauchi: J. Mater. Sci. 1993, vol. 28 (17), pp. 4681–4688.10.1007/BF00414258 ↗
44. N. Rusović, H. Warlimont: Phys. Status Solid. A 1979, vol. 53 (1), pp. 283–288.10.1002/pssa.2210530132 ↗
45. V. Maurel, L. Helfen, R. Soulignac, T. F. Morgeneyer, A. Koster, L. Rémy: Oxid. Met. 2013, vol. 79 (3-4), pp. 313–323.10.1007/s11085-012-9333-3 ↗