The Investigation on Flow Behavior of Powder Metallurgy Ti-10V-2Fe-3Al Alloy Using the Prasad Stability Criterion
Source abstract
Abstract
Abstract The hot deformation behavior of Ti-10V-2Fe-3Al alloy obtained by the powder metallurgy (PM) method was investigated. Material for the research was produced by blending of elemental powders followed by uniaxial hot pressing. Thermomechanical tests of Ti-10V-2Fe-3Al compacts were carried out to determinate the stress-strain relationships at the temperature range of 800 °C to 1000 °C and strain rate between 0.01 and 10 s−1. Based on the dynamic material model (DMM) theory, processing maps at constant strain value were developed using data obtained from hot compression tests. The processing maps were elaborated for the final strain value, which was 0.9, and with flow instability criterion domains applied to it. Two critical regions associated with the flow behavior of the investigated material were revealed. Microstructural changes during hot deformation at various temperatures and strain rates were discussed. The correlation between calculated efficiency of power dissipation, flow instability criterion, and microstructure evolution was determined. The presence of defects was confirmed in regions predicted by the instability maps. The microstructure of the investigated alloy, corresponding to the high efficiency of power dissipation characterized by the occurrence of dynamic recrystallization (DRX) phenomena, was also shown. Additionally, average hardness values in relation to variable process parameters were designated. Based on the conducted studies and analysis, processing windows for Ti-10V-2Fe-3Al alloy compacts were proposed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. F.W. Chen, G. Xu, X.Y. Zhang, K.C. Zhou, and Y. Cui: J. Alloys Compd., 2017, vol. 702, pp. 352–65.10.1016/j.jallcom.2017.01.209 ↗
2. R.R. Boyer and R.D. Briggs: J. Mater. Eng. Perform., 2013, vol. 22 pp. 2916–20.10.1007/s11665-013-0728-3 ↗
3. H.P. Chang and Y.C. Tseng: J. Med. Sci., 2018, vol. 34, pp. 202–06.
4. M.T. Mohammed: Int. J. Mod. Sci., 2017 vol. 3, pp. 224–30.
5. M. Jackson, N.G. Jones, D. Dye, and R.J. Dashwood: Mater. Sci. Eng., A, 2009 vol. 501, pp. 248–54.10.1016/j.msea.2008.09.071 ↗
6. R.R. Boyer: JOM, 2010, vol. 62, pp. 21–24.10.1007/s11837-010-0071-1 ↗
7. G. Srinivasu, Y. Natraj, A. Bhattacharjee, T.K. Nandy, and G.V.S. Nageswara Rao: Mater. Des., 2013, vol. 47, pp. 323–30.10.1016/j.matdes.2012.11.053 ↗
8. E. Calvert, B. Wynne, N. Weston, A. Tudball, and M. Jackson: J. Mater. Process. Technol., 2018, vol. 254, pp. 158–70.10.1016/j.jmatprotec.2017.11.035 ↗
9. L. Cao, X. Wu, S. Zhu, J. Mei, X. Wu, and C. Bettles: Mater. Sci. Eng., A, 2014, vol. 598, pp. 207–16.10.1016/j.msea.2014.01.013 ↗
10. N. Perevoshchikova, C.R. Hutchinson, and X. Wu: Mater. Sci. Eng., A, 2016, vol. 657, pp. 371–82.10.1016/j.msea.2016.01.082 ↗
11. M. Ahmed, D.G. Savvakin, O.M. Ivasishin, and E.V. Pereloma: J. Alloys Compd., 2017, vol. 714, pp. 610–18.10.1016/j.jallcom.2017.04.266 ↗
12. F. Yang, B. Gabbitas, M. Dore, A. Ogereau, S. Raynova, and L. Bolzoni: Mater. Chem. Phys., 2018, vol. 211, pp. 406–13.10.1016/j.matchemphys.2018.03.007 ↗
13. G. Abakumov, V. Duz, O. Ivasishirr, V. Moxson, and D. Savvakin: Ti 2011—Proc. 12th World Conf. Titanium, 2012, vol. II, pp. 1639–43.
14. M. Wojtaszek, T. Śleboda, M. Rumiński, and J. Łuksza: Appl. Mech. Mater., 2014, vol. 606, pp. 119–23.10.4028/www.scientific.net/AMM.606.119 ↗
15. H. Azizi, H. Zurob, B. Bose, S.R. Ghiaasiaan, X. Wang, S. Coulson, V. Duz, and A.B. Phillion: Addit. Manuf., 2018, vol. 21, pp. 529–35.10.1016/j.addma.2018.04.006 ↗
16. Chen W, Chen C, Zi X, Cheng X, Zhang X, Lin YC, Zhou K (2018) Mater. Sci. Eng., A 726:240–50.10.1016/j.msea.2018.04.087 ↗
17. C. Zopp, S. Blümer, F. Schubert, and L. Kroll: Ain Shams Eng. J., 2017, vol. 8, pp. 475–79.10.1016/j.asej.2016.11.004 ↗
18. X. Bai, Y. Zhao, W. Zeng, and Z. Jia: Rare Met. Mater. Eng., 2015, vol. 44, pp. 12–17.10.1016/S1875-5372(15)30003-5 ↗
19. Ma X, Li F, Cao J, Li J, Sun Z, Zhu G, Zhou S (2018) Mater. Sci. Eng., A 710:1–9.10.1016/j.msea.2017.10.057 ↗
20. M. Ahmed, D. Wexler, G. Casillas, O.M. Ivasishin, and E.V. Pereloma: Acta Mater. 2015, vol. 84, pp. 124–35.10.1016/j.actamat.2014.10.043 ↗
21. M. Ahmed, D. Wexler, G. Casillas, D.G. Savvakin, and E.V. Pereloma: Acta Mater., 2016, vol. 104, pp. 190–200.10.1016/j.actamat.2015.11.026 ↗
22. Y. Li, X. Ou, S. Ni, and M. Song: Mater. Sci. Eng. A, 2019, vol. 742, pp. 390–99.10.1016/j.msea.2018.11.035 ↗
23. D. Qin, D. Guo, L. Zheng, and Y. Li: J. Alloys Compd., 2018, vol. 76, pp. 725–31.10.1016/j.jallcom.2018.08.053 ↗
24. J. Zhao, J. Zhong, F. Yan, F. Chai, and M. Dargusch: J. Alloys Compd., 2017, vol. 710, pp. 616–27.10.1016/j.jallcom.2017.03.219 ↗
25. O. Lypchanskyi, K. Zyguła, T. Śleboda, M. Wojtaszek, and A. Łukaszek Sołek: IOP Conf. Ser.: Mater. Sci. Eng., 2018 vol. 461, p. 012048.10.1088/1757-899X/461/1/012048 ↗
26. H. Matsumoto, M. Kitamura, Y. Li, Y. Koizumi, and A. Chiba: Mater. Sci. Eng., A, 2014, vol. 611 pp. 337–44.10.1016/j.msea.2014.06.006 ↗
27. Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, K.A. Lark, and D.R. Barker: Metall. Trans. A, 1984, vol. 15A, pp. 1883–92.10.1007/BF02664902 ↗
28. J.G. Kaufman: Titanium Alloy Database–Knovel, 2012, https://app.knovel.com. Accessed January 2, 2019.
29. Z. Du, S. Jiang, and K. Zhang: Mater. Des., 2015, vol. 86, pp. 464–73.10.1016/j.matdes.2015.07.027 ↗
30. Srinivasan N, Prasad YVRK, RamaRao P (2008) Mater. Sci. Eng., A 476:146–15610.1016/j.msea.2007.04.103 ↗
31. Y.C. Lin, J. Huang, D. He, X. Zhang, Q. Wu, L. Wang, C. Chen, and K. Zhou: J. Alloys Compd., 2019 vol. 795 pp. 471–82.10.1016/j.jallcom.2019.04.319 ↗
32. F. Chen, G. Xu, X. Zhang, and K. Zhou: Mater. Des., 2017, vol. 130, pp. 302–16.10.1016/j.matdes.2017.05.078 ↗
33. Saito T, Takamiya H, Furuta T (1998) Mater. Sci. Eng., A, 243:273–78.10.1016/S0921-5093(97)00813-7 ↗
34. Philippart I, Rack HJ (1998) Mater. Sci. Eng., A 243:196–200.10.1016/S0921-5093(97)00800-9 ↗
35. Q. Wang, Y.C. Lin, Y. Jiang, X. Liu, X. Zhang, D. Chen, C. Chen, and K. Zhou: Mater. Charact., 2019, vol. 151, pp. 358–67.10.1016/j.matchar.2019.03.034 ↗
36. Balasubrahmanyam VV, Prasad YVRK (2002) Mater Sci Eng A 336(1–2):150–58.10.1016/S0921-5093(01)01982-7 ↗
37. Y.C. Lin, J. Huang, H. Li, and D. Chen: Vacuum, 2018, vol. 157, pp. 83–91.10.1016/j.vacuum.2018.08.020 ↗
38. S. Nemat-Nasser, W.G. Guo, and J.Y. Cheng: Acta Mater., 1999, vol. 47, pp. 3705–20.10.1016/S1359-6454(99)00203-7 ↗
39. Y. Sun, Z. Wan, and J. Ren: Mater. Des., 2015, vol. 86, pp. 922–32.10.1016/j.matdes.2015.07.140 ↗
40. W. Chuan and H. Liang: Vacuum, 2018, vol. 156, pp. 384–401.10.1016/j.vacuum.2018.07.056 ↗
41. M. Wojtaszek and T. Śleboda: J. Alloys Compd., 2015, vol. 615, pp. S546–S550.10.1016/j.jallcom.2014.01.161 ↗