journal article·2019-05-15

Forming of Adhesive-Bonded Sandwich Sheets with a Rubber Pad

Girish Kukreja, R. Ganesh Narayanan

Publisher page

Abstract

The effect of a rubber pad, its quality, and diameter, on the forming limit of adhesive-bonded sandwich steel sheets is studied using hemispherical dome tests. The forming limit curve (FLC) is predicted with finite element simulations and the strain mapping method. The FLCs of sandwich sheets are compared with that of base, i.e., 0.4- and 1.2-mm-thick sheets. The forming limit of sandwich sheets when formed using rubber pads improve significantly, and is equivalent to that of the base sheet of equivalent thickness formed without a rubber pad. The rubber pad leads to a uniform strain distribution due to a cushioning effect provided by the rubber pad which also delays the onset of interface delamination. The polyurethane rubber performs better compared with the silicone rubber in improving the FLC. The effect of the rubber pad diameter is insignificant. The FLCs and forming height predicted by numerical simulations are reasonably accurate, when compared with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Mechanical Behavior of Composites · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. D. Mohr and G. Straza: Advanced Engineering Materials, 2005, Vol. 7 (4), pp. 243-24610.1002/adem.200400216 ↗
2. B.P. Withy: DTA Report 416 NR 1702, New Zealand, 2017, pp. 1–21.
3. K.J. Kim, C.-W. Kim, B.-I. Choi, C.W. Sung, H.Y. Kim, S.T. Won and H.Y. Ryu: Journal of Solid Mechanics and Materials Engineering, 2008, Vol. 2 (4), pp. 574-58110.1299/jmmp.2.574 ↗
4. K.J. Kim, M.H. Rhee, B.-I. Choi, C.-W. Kim, C.W. Sung, C.P. Han, K.W. Kang and S.T. Won: International Journal of Precision Engineering and Manufacturing, 2009, Vol. 10 (4), pp. 71-7510.1007/s12541-009-0073-5 ↗
5. J. Liu and L. Zhuang: International Journal of Advanced Manufacturing Technology, 2018, Vol. 97, pp. 1885–189610.1007/s00170-018-2077-8 ↗
6. H. Palkowski and A. Carradò: Emerging Materials Research, 2014, Vol. 3 (3), pp. 130-13510.1680/emr.13.00050 ↗
7. M.H. Parsa, M.M. Ettehad, P.H. Matin and S. Al Ahkami (2010) ASME J. Eng. Mater. Technol., vol. 132(3), pp. 03100410.1115/1.4001264 ↗
8. M.H. Parsa, M.M. Ettehad and P.H. Matin: Journal of Engineering Materials and Technology, 2013, Vol. 135 (3), pp. 031003-1-031003-1210.1115/1.4023848 ↗
9. A. Kami and D. Banabic: AIP Conference Proceedings, 2018, Vol. 1960 (1), 15000510.1063/1.5035012 ↗
10. K.S. Shin, K.J. Kim, S.W. Choi, M.H. Rhee: Metals and Materials, 1999, Vol. 5 (6), pp 613–61810.1007/BF03026313 ↗
11. B. Engel and J. Buhl: Steel Research International, 2011, Vol. 82(6), pp. 626-63110.1002/srin.201000205 ↗
12. E. Finckenstein, L. Kebler and V. Steininger: Steel Research International, 1996, Vol. 67 (9), pp. 364-36810.1002/srin.199605502 ↗
13. A.A. Zadpoor, J. Sinke and R. Benedictus: International Journal of Adhesion and Adhesives, 2009, Vol. 29 (5), pp. 558-57110.1016/j.ijadhadh.2009.01.003 ↗
14. A.A. Zadpoor, J. Sinke and R. Benedictus: Materials and Design, 2010, Vol. 31 (10), pp. 4611-462010.1016/j.matdes.2010.05.041 ↗
15. C.D.M. Liljedahl, A.D. Crocombe, M.A. Wahab and I.A. Ashcroft: The Journal of Adhesion, 2006, Vol. 82 (11), pp. 1061-108910.1080/00218460600948495 ↗
16. T. Altan and A.E. Tekkaya: Sheet metal forming Fundamentals, ASM International, Materials Park, 2012
17. D.J. Browne and E. Battikha: Journal of Materials Processing Technology, 1995, Vol. 55, pp. 218-22310.1016/0924-0136(95)02009-8 ↗
18. G. Sala: Materials and Design, 2001, Vol. 22, pp. 299-31510.1016/S0261-3069(00)00088-1 ↗
19. Y. Liu and L. Hua: Journal of Power Sources, 2010, Vol. 195 (11), pp. 3529-353510.1016/j.jpowsour.2009.12.046 ↗
20. C.-Y. Son, Y.-P. Jeon, Y.-T. Kim and C.-G. Kang: Proc IMechE Part B: Journal of Engineering Manufacture, 2012, Vol. 226 (5), pp. 909–91810.1177/0954405411434446 ↗
21. V. Satheeshkumar and R.G. Narayanan: Proc IMechE Part C: J Mechanical Engineering Science, 2014, Vol. 228 (3), pp. 405–42510.1177/0954406213488727 ↗
22. V. Satheeshkumar and R.G. Narayanan: International Journal of Material Forming, 2016, Vol. 9, pp. 663–67510.1007/s12289-015-1253-8 ↗
23. V. Satheeshkumar and R.G. Narayanan: Archives of Civil and Mechanical Engineering, 2015, Vol. 15 (1), pp. 30-4110.1016/j.acme.2014.09.002 ↗
24. K.J. Kim, D. Kim, S.H. Choi, K. Chung, K.S. Shin, F. Barlat, K.H. Oh, J.R. Youn: Journal of Materials Processing Technology, 2003, Vol. 139, pp. 1–710.1016/S0924-0136(03)00173-0 ↗
25. J. Liu, W. Liu and W. Xue: Materials and Design, 2013, Vol. 46, pp. 112–12010.1016/j.matdes.2012.09.057 ↗
26. E. Karajibani, A. Fazli and R. Hashemi: International Journal of Advanced Manufacturing Technology, 2015, Vol. 80, pp. 113–2110.1007/s00170-015-6978-5 ↗
27. L. Belhassen, S. Koubaa, M. Wali and F. Dammak: International Journal of Mechanical Sciences, 2016, Vol. 117, pp. 218-22610.1016/j.ijmecsci.2016.08.015 ↗
28. M. Shahzad, A. Kamran, M. Z. Siddiqui and M. Farhan: Materials Research, 2015, Vol. 18, pp. 918–92410.1590/1516-1439.320414 ↗
29. P.P. Camanho, C.G. Davila and M.F. De Moura: Journal of Composite Materials, 2003, Vol. 37 (16), pp. 1415–143810.1177/0021998303034505 ↗
30. K.S. Chan: Metallurgical Transactions A, 1985, Vol. 16, pp. 62910.1007/BF02814237 ↗
31. Z. Marciniak and K. Kuczynski: International Journal of Mechanical Sciences, 1967, Vol. 9, pp. 609-62010.1016/0020-7403(67)90066-5 ↗
32. B.M. Kami, A.S. Dariani, D.S. Vanini, D. Comsa, D. Banabic: Journal of Materials Processing Technology, 2015, Vol. 216, pp. 472-48310.1016/j.jmatprotec.2014.10.017 ↗
33. J. Lin, M. Mohamed, D. Balint and T.A. Dean: International Journal of Damage Mechanics, 2014, Vol. 23 (5), pp. 684–70110.1177/1056789513507731 ↗
34. B. Li, T.J. Nye and P.D. Wu: The Journal of Strain Analysis for Engineering Design, 2010, Vol. 45 (4), pp. 255-27310.1243/03093247JSA608 ↗
35. M. Borhani, F. Djavanroodi: Materials Science and Engineering A, 2012, Vol. 546, pp. 1– 710.1016/j.msea.2012.02.089 ↗