High-Temperature Dislocation Climb in the γ′ Rafts of Single-Crystal Superalloys: The Hypothesis of a Control by Dislocation Entry into the Rafts
Source abstract
Abstract
The good mechanical resistance to high-temperature creep of [001] oriented single-crystal superalloys is due to the properties of the rafts, i.e., platelets of the L12 γ′ phase embedded in a γ matrix. At temperatures higher than 900 °C, the plastic strain of the rafts results from the climb of dislocation pairs with a total a⋅⟨100⟩ Burgers vector and/or from the climb at the γ/γ′ interfaces of a/2⋅⟨110⟩ dislocation segments. This climb motion involves the exchange of vacancies between these dislocations and vacancy sinks such as pores and the specimens’ surfaces. In this paper, we suggest that the entry of a⋅⟨100⟩ dislocations into the rafts requires the overcoming of a threshold stress and show that this hypothesis gives a natural explanation to some of the most salient aspects of their mechanical behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. F.R.N. Nabarro and F. de Villiers: The Physics of Creep, Taylor & Francis, London, 1995, ISBN-13: 978-0850668520.
2. R. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, ISBN-13: 978-0521070119.
3. L. Dirand, A. Jacques, J. P. Chateau, T. Schenk, O. Ferry and P. Bastie: Philos. Mag, 2013, vol. 93(SI 10–12), pp.1384–1412.10.1080/14786435.2012.746794 ↗
4. A. Jacques and P. Bastie, Philos. Mag. 2003, Vol 83, 26, pp. 3005-27.10.1080/1478643031000149108 ↗
5. R. Trehorel, G. Ribarik, T. Schenk and A. Jacques: J. Appl. Crystallogr. (accepted).
6. M. Feller-Kniepmeier, and T. Link, T., Metall. Trans., 1989, 20, pp. 1233.10.1007/BF02647405 ↗
7. T. Pollock and A. Argon: Acta Metall. Mater., 1992, vol. 40(1), pp. 1–30.10.1016/0956-7151(92)90195-K ↗
8. C. Carry, and J. L. Strudel, Acta metall., 1977, Vol. 25, pp.767-77.10.1016/0001-6160(77)90092-X ↗
9. C. Carry, and J. L. Strudel, Acta metall., 1978, 26, pp. 859-70.10.1016/0001-6160(78)90035-4 ↗
10. A. Epishin and T. Link, Philos. Mag. 2004, Vol. 84, 19, pp.1979-2000.10.1080/14786430410001663240 ↗
11. A. Prakash, J. Guenolé, J. Wang, J. Müller, E. Spiecker, M.J. Mills, I. Povstugar, P. Choi, D. Raabe and E. Bitzek: Acta Mater. , 2015, vol. 92, pp. 33–45.10.1016/j.actamat.2015.03.050 ↗
12. P. Wollgramm, H. Buck, A. Kostka, C. Somsen, A. Dlouhy and G. Eggeler: Acta Mater. , 2015, vol. 90(1), pp. 105–17.10.1016/j.actamat.2015.02.005 ↗
13. R. Srinivasan G. Eggeler and M. J. Mills, Acta mater. 2000, Vol. 48, pp. 4867-78.10.1016/S1359-6454(00)00292-5 ↗
14. M. Huang, L. Zhuo, J. Xiong, J. Li and J. Zhu: Philos. Mag. Lett., vol. 95(10), pp. 496–503.10.1080/09500839.2015.1100763 ↗
15. F. Mompiou, and D. Caillard Mater. Sci. Eng. A 2008 Vol. 483, 1, pp.143-147.10.1016/j.msea.2006.12.166 ↗
16. F. Touratier, B. Viguier, C. Siret, S. Lesterlin and E. Andrieu: in Eurosuperalloys 2010, pp. 7–12, doi:https://doi.org/10.4028/www.scientific.net/AMR.278.10.4028/www.scientific.net/AMR.278 ↗
17. A. Srivastava, S. Gopagoni, A. Needleman, V. Seetharaman, A. Staroselsky, and R. Banerjee, Acta Mater. 2012, Vol. 60, 16, Pp. 5697-5711.10.1016/j.actamat.2012.06.043 ↗
18. L. Agudo Jacome, P. Nörtershäuser, C. Somsen, A. Dlouhy, and G. Eggeler, Acta Mater. 2014, Vol. 69, pp. 246–64.10.1016/j.actamat.2014.01.021 ↗
19. F. Mompiou and D. Caillard: Mater. Sci. Eng A, 2008, vol. 483(1), pp. 143–47.10.1016/j.msea.2006.12.166 ↗
20. J.P. Hirth and J. Lothe: Theory of Dislocations, 2nd ed., Krieger Publishing Company, Malabar, 1983, p. 544.10.1115/1.3167075 ↗
21. D. Texier, D. Monceau, J.C. Salabura, R. Mainguy and E. Andrieu, Mater. High Temp. 2016, Vol. 33, 4-5, pp. 325–37. https://doi.org/10.1080/09603409.2016.1182250.10.1080/09603409.2016.1182250 ↗
22. R. Hüttner, R. Völkl, J. Gabel, and U. Glatzel: in TMS Superalloys 2008, pp. 719–23, https://www.tms.org
23. S. Dryepondt, D. Monceau, F. Crabos, and E. Andrieu, Acta Materialia 2005, Vol.53, 15, Pp. 4199-4209.10.1016/j.actamat.2005.05.018 ↗
24. R. Trehorel: PhD Thesis, Université de Lorraine, 2018.
25. J. B. le Graverend, A. Jacques, J. Cormier, O. Ferry, T. Schenk and J. Mendez, Acta Mater. 2015, Vol. 84, pp. 65–79.10.1016/j.actamat.2014.10.036 ↗
26. J. X. Zhang, T. Murakumo, Y. Koizumi, H. Harada, J. Mater. Sci. 2003, Vol. 38, pp. 4883–4888.10.1023/B:JMSC.0000004409.70156.6a ↗
27. P. Kontis, Z. Li, D. M. Collins, J. Cormier, D. Raabe, B. Gault, Scripta Mater. 2018, Vol 145, pp.76–80.10.1016/j.scriptamat.2017.10.005 ↗
28. A.B. Parsa, P. Wollgramm, H. Buck, A. Kostka, C. Somsen, A. Dlouhy and G. Eggeler, Acta Materialia 2015, Vol. 90, pp 105–17.10.1016/j.actamat.2015.02.005 ↗
29. A B. Parsa, P. Wollgramm, H. Buck, C. Somsen, A. Kostka, I. Povstugar, P. Choi, D. Raabe, A. Dlouhy, J. Müller, E. Spiecker, K. Demtroder, J. Schreuer, K. Neuking and G. Eggeler, Adv. Eng. Mater. 2015, Vol. 17, No. 2, pp. 216-230.10.1002/adem.201400136 ↗
30. L. M. Roncery, I. Lopez-Galilea, B. Ruttert, D. Bürger, P. Wollgramm, G. Eggeler, W. Theisen, Adv. Eng. Mat. 2016 Vol. 18, No. 8, pp. 1381-87.10.1002/adem.201600071 ↗
31. J. Komenda and P.J. Henderson, Scripta Mater. 1997, Vol. 37, 11, pp. 1821-26.10.1016/S1359-6462(97)00341-2 ↗
32. H. Buck, P. Wollgramm, A. B. Parsa, G. Eggeler, Mat.-wiss. u. Werkstofftech. 2015, Vol. 46, No. 6, p577-590.10.1002/mawe.201500379 ↗
33. T. Link, S. Zabler, A. Epishin, A. Haibel, M. Bansal, and X. Thibault, Mater. Sci. Eng. A 2006, Vol. 425, pp. 47-54.10.1016/j.msea.2006.03.005 ↗
34. J.B. le Graverend, J. Adrien, and J. Cormier, Mater. Sci. Eng. A 2017, Vol. 695, pp. 367–78.10.1016/j.msea.2017.03.083 ↗