Correlation of the Solidification Path with As-Cast Microstructure and Precipitation of Ti,Nb(C,N) on a High-Temperature Processed Steel
Source abstract
Abstract
The solidification path of a high-temperature processed (HTP) X65 sour service steel with 0.039 wt pct C, 0.09 wt pct Nb, and 0.54 wt pct Mn and its effect on the segregation, microstructure, and precipitation distribution of Ti,Nb(C,N) was studied using optical and confocal microscopy, scanning electron microscopy (SEM), and computational simulation (Thermo-Calc and DICTRA). The results were compared with those obtained for another commercial microalloyed steel, containing 0.09 wt pct C, 0.04 wt pct Nb, and 0.97 wt pct Mn. The results indicate that the main parameter that influences microsegregation is the C content, which has a large influence on the solidification path. The difference in segregation between different positions in industrial continuous cast slabs of the steels was also observed, as expected. The larger solidification interval (TL-TS) of the commercial microalloyed steel indicates the formation of a solidification front that has higher solute concentration than the X65 HTP sour service steel, which concurs with the higher macro- and microsegregation observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. G. Krauss: Metall. Mater. Trans. A, 1978, vol. 34A, pp. 781–92.
2. G. Lesoult: Mater. Sci. Eng., A, 2005, vol. 413A, pp. 19–29.10.1016/j.msea.2005.08.203 ↗
3. T. Brune, K. Kortzak, D. Senk, N. Reuther, and M. Schäperkötter: Steel Res. Int., 2015, vol. 86, pp. 33–39.10.1002/srin.201400015 ↗
4. J. Zhao, Z. Jiang, and D. Wei: Adv. Mater. Res., 2013, vols. 652–654, pp. 2465–68.10.4028/www.scientific.net/AMR.652-654.2465 ↗
5. E.J. Pickering: ISIJ Int., 2013, vol. 53, pp. 935–49.10.2355/isijinternational.53.935 ↗
6. W.A. Spitzig: Metall. Trans. A, 1983, vol. 14A, pp. 271–83.10.1007/BF02651624 ↗
7. C. Zhou and R. Priestner: ISIJ Int., 1996, vol. 36, pp. 1397–1405.10.2355/isijinternational.36.1397 ↗
8. E.J. Palmiere, C.I. Garcia, and A.J. Deardo: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 951–60.10.1007/BF02649763 ↗
9. C. Fossaert, G. Rees, T. Maurickx, and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 21–30.10.1007/BF02669791 ↗
10. W.M. Rainforth, M.P. Black, R.L. Higginson, E.J. Palmiere, C.M. Sellars, I. Prabst, P. Warbichler, and F. Hofer: Acta Mater., 2002, vol. 50, pp. 735–47.10.1016/S1359-6454(01)00389-5 ↗
11. M. Perez, E. Courtois, D. Acevedo, T. Epicier, and P. Maugis: Philos. Mag. Lett., 2007, vol. 87, pp. 645–56.10.1080/09500830701427003 ↗
12. Z. Chen, M.H. Loretto, and R.C. Cochrane: Mater. Sci. Technol., 1987, vol. 3, pp. 836–44.10.1179/mst.1987.3.10.836 ↗
13. M.G. Lage and A. Costa e Silva: J. Mater. Res. Technol., 2015, vol. 4, pp. 353–58.10.1016/j.jmrt.2015.06.002 ↗
14. S. Zheng, C. Davis, and M. Strangwood: Mater. Charact., 2014, vol. 95, pp. 94–104.10.1016/j.matchar.2014.06.008 ↗
15. E. Scheil: Z. Metallkd., 1942, vol. 34, pp. 70–72.
16. M.C. Flemings: Solidification Processing, McGraw-Hill, Inc., New York, NY, 1974, pp. 160–67.
17. D. Zhang: Ph.D. Thesis, The University of Birmingham, Birmingham, United Kingdom, 2015.
18. A. Suzuki, T. Suzuki, Y. Nagoaka, and Y. Iwata: J. Jpn. Inst. Met. Mater., 1968, vol. 9, pp. 1301–05.10.2320/jinstmet1952.32.12_1301 ↗
19. S. Roy, S. Patra, S. Neogy, A. Laik, S.K. Choudhary, and D. Chakrabarti: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1845–60.10.1007/s11661-011-1045-9 ↗
20. M.C. Carboni, R.A. Mesquita, E.B. Cruz, D. Fridman, M.A.S. Nogueira: 42º International Steelmaking Seminar, Salvador, Brasil, 2011, pp. 1–13.
21. J. Stock: Master Thesis, Colorado School of Mines, Golden, CO, 2013.
22. J.M. Gray: Companhia Brasileira de Metalurgia e Mineração—CBMM, Proc. Microalloyed Steels for Sour Service Int. Sem., São Paulo, Brasil, 2012, CBMM, Araxá, https://samario01.cbmm.com.br/cgs/publico/VisualizaArquivoBVPublica.ashx?DOC_Codigo=15521.
23. K. Hulka, P. Bordignon, and J.M. Gray: Niobium Technical Report, Niobium Technical, 2004, pp. 1–32.
24. O. Yasuhide and Y. Akira: Corrosion Liquid for Exposing Dendrite of Carbon Steel or Low-Alloy Steel Cast Piece, JP Patent 2001-289839A, 2001.
25. A.L.V. Costa e Silva: Technol. Metall. Mater. Miner., 2014, vol. 11, pp. 3–13.10.4322/tmm.2014.009 ↗
26. Y. El-Bealy and B.G. Thomas: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 689–93.10.1007/BF02915668 ↗
27. Q. Chen and B. Sundman: J. Jpn. Inst. Met. Mater., 2002, vol. 43, pp. 551–59.
28. J. Campbell: Castings, 2nd ed., Butterworth-Heinemann, Oxford, United Kingdom, 2003, pp. 131–33.
29. H. Luo, L.P. Karjalainen, D.A. Porter, H.M. Liimatainen, and Y. Zhang: ISIJ Int., 2002, vol. 42, pp. 273–82.10.2355/isijinternational.42.273 ↗
30. A. Ruiz-Aparicio: Master Thesis, Universidad Nacional Autónoma de México, Mexico City, Mexico, 2000.
31. M. Kapoor, R. O’Malley, and G.B. Thompson: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 1984–95.10.1007/s11661-016-3398-6 ↗
32. D. Chakrabarti, C. Davis, and M. Strangwood: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1963–77.10.1007/s11661-008-9535-0 ↗
33. S. Roy, D. Chakrabarti, and G.K. Dey: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 717–28.10.1007/s11661-012-1409-9 ↗
34. C. Davis and M. Strangwood: Mater. Sci. Technol., 2009, vol. 25, pp. 1126–33.10.1179/174328409X453262 ↗
35. A. Schneider, C. Stallybrass, J. Konrad, A. Kulgemeyer, H. Meuser, and S. Meimeth: Int. J. Mater. Res., 2008, vol. 99, pp. 674–79.10.3139/146.101689 ↗
36. K. Harste, B. Weisgerber, K.H. Tacke, J. Gnauk, M. Bobadilla, G. Lovato, M. Crocenzo, and T. Hätönen: Report No. EUR 19491, Technical Steel Research, European Commission, 2001.