journal article·2017-11

Extension of the Mechanical Threshold Stress Model to Static and Dynamic Strain Aging: Application to AA5754-O

Yu Feng, Sudipto Mandal, Brian Gockel, Anthony D. Rollett

Publisher page

Abstract

Based on the mechanical threshold stress model and the visco-plastic self-consistent algorithm, a modified constitutive model is developed to model static strain aging and dynamic strain aging for application to a non-heat treatable aluminum alloy, AA5754-O. The implementation is based on a combination of the evolution of dislocation density and the effect of solutes on both mobile dislocations and forest dislocations. Using this model, the stress–strain behavior of AA5754-O is simulated in multi-path, multi-temperature, and variable strain rate tensile tests. The low temperature and strain rate sensitivities of the modified mechanical threshold stress model in the dynamic strain aging regime are successfully accounted for. The results show quantitative agreement with experimental data from multiple sources.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. H. Lim, C. C. Battaile; J. L. Brown and C. R. Weinberger: Model. Simul. Mater. Sci. Eng., 2016, vol. 24, p. 55018.10.1088/0965-0393/24/5/055018 ↗
2. U. F. Kocks: Philos. Mag., 1966, vol. 13, pp. 541–566.10.1080/14786436608212647 ↗
3. J.L. Amorós, A.H. Cottrell, A. Seeger: Deformation and Flow of Solids/Verformung Und Fliessen Des Festkörpers, Springer, Berlin (1956).
4. P. S. Follansbee: Fundamentals of Strength, 1st ed., John Wiley & Sons, Inc., Hoboken, NJ, USA, 2013.
5. A. H. Cottrell and B. A. Bilby: Proc. Phys. Soc. Sect. A, 1949, vol. 62, p. 49.10.1088/0370-1298/62/1/308 ↗
6. H. Mecking and U. F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865–75.10.1016/0001-6160(81)90112-7 ↗
7. A. Van Den Beukel and U. F. Kocks: Acta Metall., 1982, vol. 30, pp. 1027–34.10.1016/0001-6160(82)90211-5 ↗
8. U.F. Kocks, A.S. Argon, and M.F. Ashby: Thermodynamics and Kinetics of Slip. Pergamon Press, Oxford, 1975.
9. P. S. Follansbee and U. F. Kocks: Acta Metall., 1988, vol. 36, pp. 81–93.10.1016/0001-6160(88)90030-2 ↗
10. A.J. Beaudoin, U.F. Kocks, S.R. MacEwen, S.R. Chen, and M.G. Stout: Hot Deformation of Aluminum Alloys II Symposium, 1999.
11. S. Kok, A. J. Beaudoin, and D. A. Tortorelli: Int. J. Plast., 2002, vol. 18, pp. 715–41.10.1016/S0749-6419(01)00051-1 ↗
12. B. Banerjee and A. Bhawalkar: J. Mech. Mater. Struct., 2008, vol. 3, pp. 391–424.10.2140/jomms.2008.3.391 ↗
13. M. A. Iadicola, L. Hu, A. D. Rollett, and T. Foecke: Int. J. Solids Struct., 2012, vol. 49, pp. 3507–16.10.1016/j.ijsolstr.2012.03.015 ↗
14. A. van den Beukel: Scr. Metall., 1983, vol. 17, pp. 659–63.10.1016/0036-9748(83)90398-8 ↗
15. N. Louat: Scr. Metall., 1981, vol. 15, pp. 1167–70.10.1016/0036-9748(81)90290-8 ↗
16. P. Franciosi: Acta Metall., 1985, vol. 33, pp. 1601–12.10.1016/0001-6160(85)90154-3 ↗
17. P. S. Follansbee: Metall. Mater. Trans. A, 2016, vol. 47, pp. 4455–66.10.1007/s11661-016-3609-1 ↗
18. Y. Estrin and L.P. Kubin: Acta Metall., 1986, vol. 34, pp. 2455–64.10.1016/0001-6160(86)90148-3 ↗
19. L. P. Kubin, Y. Estrin, and C. Perrier: Acta Metall. Mater., 1992, vol. 40, pp. 1037–44.10.1016/0956-7151(92)90081-O ↗
20. C. Fressengeas, A. J. Beaudoin, M. Lebyodkin, L. P. Kubin, and Y. Estrin: Mater. Sci. Eng. A, 2005, vol. 400–401, pp. 226–30.10.1016/j.msea.2005.02.073 ↗
21. R. A. Lebensohn and C. N. Tomé: Acta Metall. Mater., 1993, vol. 41, pp. 2611–24.10.1016/0956-7151(93)90130-K ↗
22. A. H. Cottrell: Dislocations and Plastic Flow in Crystals, 1st ed., Oxford University Press, New York, 1953.
23. J. Friedel: Dislocations, 1st ed., Addison-Wesley Publishing Company Inc, Massachusetts, 1964.
24. E. Nes: Acta Metall. Mater., 1995, vol. 43, pp. 2189–2207.10.1016/0956-7151(94)00409-9 ↗
25. M. Pham, M. Iadicola, A. Creuziger, L. Hu, and A. D. Rollett: Int. J. Plast., 2015, vol. 75, pp. 226–43.10.1016/j.ijplas.2014.09.010 ↗
26. N. Abedrabbo, F. Pourboghrat, and J. Carsley: Int. J. Plast., 2007, vol. 23, pp. 841–75.10.1016/j.ijplas.2006.10.005 ↗
27. F. Ozturk, S. Toros, and H. Pekel: Mater. Sci. Technol., 2009, vol. 25, pp. 919–24.10.1179/174328408X365775 ↗
28. K. Zhao, R. Fan and L. Wang: J. Mater. Eng. Perform., 2016, vol. 25, pp. 781–89.10.1007/s11665-016-1913-y ↗
29. J. Cheng and S. Nemat-Nasser: Acta Mater., 2000, vol. 48, pp. 3131–44.10.1016/S1359-6454(00)00124-5 ↗
30. M. A. Soare and W. A. Curtin: Acta Mater., 2008, vol. 56, pp. 4046–61.10.1016/j.actamat.2008.04.027 ↗
31. M. A. Soare and W. A. Curtin: Acta Mater., 2008, vol. 56, pp. 4091–4101.10.1016/j.actamat.2008.04.030 ↗
32. F. Zhang, A. F. Bower, and W. A. Curtin: Int. J. Numer. Methods Eng., 2011, vol. 86, pp. 70–92.10.1002/nme.3047 ↗
33. J. Cheng, S. Nemat-Nasser, and W. Guo: Mech. Mater., 2001, vol. 33, pp. 603–16.10.1016/S0167-6636(01)00076-X ↗
34. S. Nemat-Nasser and Y. Li: Acta Mater., 1998, vol. 46, pp. 565–77.10.1016/S1359-6454(97)00230-9 ↗
35. W. A. Curtin, D. L. Olmsted, and L. G. Hector: Nat. Mater., 2006, vol. 5, pp. 875–80.10.1038/nmat1765 ↗
36. S. M. Keralavarma, A. F. Bower, and W. A. Curtin: Nat. Commun., 2014, vol. 5, pp. 4604–12.10.1038/ncomms5604 ↗
37. J. D. Eshelby: Ann. Phys., 1957, vol. 456, pp. 116–21.10.1002/andp.19574560113 ↗
38. P. Franciosi, M. Berveiller, and A. Zaoui: Acta Metall., 1980, vol. 28, pp. 273–83.10.1016/0001-6160(80)90162-5 ↗
39. A. S. Argon and E. Orowan: Physics of Strength and Plasticity, Cambridge, M.I.T. Press, 1969.
40. U. Essmann and H. Mughrabi: Philos. Mag. A, 1979, vol. 40, pp. 731–56.10.1080/01418617908234871 ↗
41. L.P. Kubin and Y. Estrin: Acta Metall. Mater., 1990, vol. 38, pp. 697–708.10.1016/0956-7151(90)90021-8 ↗
42. B. S. Anglin, B. T. Gockel, and A. D. Rollett: Integr. Mater. Manuf. Innov., 2016, vol. 5, p. 11.10.1186/s40192-016-0053-4 ↗
43. L. Hu, A. D. Rollett, M. Iadicola, T. Foecke, and S. Banovic: Metall. Mater. Trans. A, 2012, vol. 43, pp. 854–69.10.1007/s11661-011-0927-1 ↗
44. MATLAB: Version 8.5.0 (R2015a), The MathWorks Inc., Natick, 2015.
45. M.S. Pham, A. Creuziger, M. Iadicola, and A.D. Rollett: J. Mech. Phys. Solids, 2016, DOI:10.1016/j.jmps.2016.08.011.10.1016/j.jmps.2016.08.011 ↗