Creep-Fatigue Cracking Near the Welded Interface in Friction Welding Dissimilar Superalloys INCONEL 718 and MAR-M247
Source abstract
Abstract
A forged INCONEL 718 and a cast MAR-M247 alloy were joined by a friction welding process. The creep-fatigue strength of this joint was investigated. The life of the joint was significantly shorter than that of the base alloys. The joint failed near the interface of the INCONEL 718 side, although the life of INCONEL 718 was longer than that of MAR-M247. To understand this behavior, the stress field in the welding was numerically analyzed using a visco-elastic model. The results suggested that triaxiality in the stress state could be promoted near the welded interface and lead to an acceleration of creep-fatigue crack nucleation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Roger C. Reed: The Superalloys Fundamentals and Applications, Cambridge University Press, Cambridge, United Kingdom, 2006.
2. Matthew J. Donachie and Stephen J. Donachie: Superalloys: A Technical Guide, ASM INTERNATIONAL, Materials Park, OH, 2002.10.31399/asm.tb.stg2.9781627082679 ↗
3. J. Gayda, T.P. Gabb, and P.T. Kantzos: Proc. Int. Symp. Superalloys, 2004, pp. 323–29.10.7449/2004/Superalloys_2004_323_329 ↗
4. T.P. Gabb, P.T. Kantzos, J. Telesman, J. Gayda, C.K. Sudbrack, and B. Palsa: Int. J. Fatigue, 2011, vol. 33 (3), pp. 414–26.10.1016/j.ijfatigue.2010.09.022 ↗
5. T.P. Gabb, R.A. MacKay, S.L. Draper, C.K. Sudbrack, and M.V. Nathal: Report No. NASA/TM-2013-217901, NASA Glenn Research Center, Cleveland, OH, 2013.
6. M. Okazaki, M. Sakaguchi, T.H. Tran, and M. Sekihara: Superalloys, 2008, pp. 221–28.10.7449/2008/Superalloys_2008_221_228 ↗
7. M. Karadge, M. Preuss, P.J. Withers, and S. Bray: Mater. Sci. Eng. A, 2008, vol. 491 (1–2), pp. 446–53.10.1016/j.msea.2008.04.064 ↗
8. O.N. Senkov, D.W. Mahaffey, S.L. Semiatin, and C. Woodward: J. Mater. Eng. Perform., 2015, vol. 24 (3), pp. 1173–84.10.1007/s11665-014-1379-8 ↗
9. J. Hurst: Report No. NASA/TM-2011-216747, NASA Glenn Research Center, Cleveland, OH, 2011.
10. M. Preuss, J.W.L. Pang, P.J. Withers, and G.J. Baxter: Metall. Mater. Trans. A, 2002, 30A, pp. 3227–34.10.1007/s11661-002-0308-x ↗
11. F. Daus, H.Y. Li, G. Baxter, S. Bray, and P. Bowen: Mater. Sci. Technol., 2007, vol. 23 (12), pp. 1424–32.10.1179/174328407X243997 ↗
12. H.Y. Huang, M. Li, M. Preuss, P. Karadge, S. Bowen, G. Bray, and G. Baxter: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1608–19.10.1007/s11661-007-9194-6 ↗
13. M.Y. Amegadzie, O.T. Ola, O.A. Ojo, P. Wanjara, and M.C. Chaturvedi: Superalloys, 2012, pp. 587–94.10.1002/9781118516430.ch65 ↗
14. D. Furrer and Hans Fecht: JOM, 1999, pp. 14–17.10.1007/s11837-999-0005-y ↗
15. S. V. Lalam, G. M. Reddy, T. Mohandas, M. Kamaraj, and B.S. Murty: Mater. Sci. Technol., 2009, vol. 25 (7), pp. 851–61.10.1179/174328408X369384 ↗
16. W.D. Cao: Proc. Int. Symp. on Superalloys, 2008, pp. 789–97.10.7449/2008/Superalloys_2008_789_797 ↗
17. C.J. Boehlert, D.S. Dickmann, and N.C. Eisinger: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 27–40.10.1007/s11661-006-0149-0 ↗
18. R. Damodaram, S.G.S. Raman, D.V.V. Satyanarayana, G.M. Reddy, and K. P. Rao: Mater. Sci. Eng. A, 2014, vol. 612, pp. 414–22.10.1016/j.msea.2014.06.076 ↗
19. R.L. Huddleston: Report No. CONF-930702–44, American Society of Mechanical Engineers (ASME) Pressure Vessel and Piping Conf., Denver, CO, July 1993.
20. M.W. Spindler: Fatigue Fract. Eng. Mater. Struct., 2004, vol. 27 (4), pp. 273–81.10.1111/j.1460-2695.2004.00732.x ↗
21. Ling Yang, Keh-Minn Chang, Sarwan Mannan, and John de Barbadillo: Superalloys 718, 625, 706 and Various Derivatives, TMS, Warrendale, PA, 1997, pp. 353–65.10.7449/1997/Superalloys_1997_353_365 ↗
22. P.R.A.A. Silva, R. Baldan, C.A. Nunes, C.C. Caelho, and A.M.S. Costa: Mater. Charact., 2013, vol. 75, pp. 214–19.10.1016/j.matchar.2012.11.006 ↗
23. D.J. Abson and J.S. Rothwell: Int. Mater. Rev., 2013, vol. 58 (8), pp. 437–73.10.1179/1743280412Y.0000000016 ↗
24. M. Tabuchi, M. Kondo, T. Watanabe, H. Hongo, F. Yin, and F. Abe: Acta Metall. Sinica (English Lett.), 2004, vol. 17 (4), pp. 331–37.
25. R. Damodaram, S. Ganesh Sundara Raman, and K. Prasad Rao: Mater. Des., 2014, vol. 53, pp. 954–61.10.1016/j.matdes.2013.07.091 ↗
26. R. Damodaram, S. Ganesh Sundara Raman, and K. Prasad Rao: Mater. Sci. Eng. A, 2013, vol. 560, pp. 781–86.10.1016/j.msea.2012.10.035 ↗
27. J. Gayda and T. Gabb: Report No. NASA/TM-2005-213650, National Aeronautics and Space Administration Glenn Research Center, Cleveland, OH, June 2005.
28. Special Metals Knowledgebase, Special Metals Corporation, New Hartford, NY, 1998, http://www.specialmetals.com/documents/INCONEL%20alloy%20718.pdf.
29. H.T. Yao, F.Z. Xuan, Z. Wang, and S.T. Tu: Nucl. Eng. Des., 2007, vol. 237, pp. 1969–86.10.1016/j.nucengdes.2007.02.003 ↗