journal article·2016-07

Plunger Kinematic Parameters Affecting Quality of High-Pressure Die-Cast Aluminum Alloys

Elena Fiorese, Franco Bonollo

Publisher page

Abstract

The selection of the optimal process parameters in high-pressure die casting has been long recognized as a complex problem due to the involvement of a large number of interconnected variables. Among these variables, the effect of the plunger motion has been proved to play a prominent role, even if a thorough and exhaustive study is still missing in the literature. To overcome this gap, this work aims at identifying the most relevant plunger kinematic parameters and estimates their correlation with the casting quality, by means of a statistically significant sample manufactured with different plunger motion profiles. In particular, slow and fast shot velocities and switching position between two stages have been varied randomly in accordance with design of experiment methodology. The quality has been assessed through the static mechanical properties and porosity percentage. As a further proof, the percentage of oxides has been estimated on the fracture surfaces. These measurements have been correlated to novel parameters, representing the mechanical energy and the inertial force related to the plunger motion, that have been extracted from the time-history of the displacement curves. The application of statistical methods demonstrates that these novel parameters accurately explain and predict the overall quality of castings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical and Thermal Properties Analysis · Material Properties and Applications · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. L. Wang, P. Turnley and G. Savage: J. Mater. Process. Technol., 2011, vol. 211, pp. 1510-1515.10.1016/j.jmatprotec.2011.03.024 ↗
2. J.A. Francis and G.M.D. Cantin: Mater. Sci. Eng. A, 2005, vol. 407A, pp. 322-329.10.1016/j.msea.2005.07.042 ↗
3. F. Bonollo, E. Fiorese, G. Timelli, L. Arnberg, and A.R. Adamane: 71st World Foundry Congress: Advanced Sustainable Foundry, WFC 2014.
4. A.R. Adamane, L. Arnberg, E. Fiorese, G. Timelli and F. Bonollo: Int. J. Metalcasting, 2015, vol. 9(1), pp. 43-53.10.1007/BF03355601 ↗
5. C. Thibault and M. Funke: Hydraulics & pneumatics, 2000, vol. 53(10), pp. 51-54.
6. G.O. Verran, R.P.K. Mendes and L.V.O. Dalla Valentina: J. Mater. Process. Technol., 2008, vol. 200, pp. 120-125.10.1016/j.jmatprotec.2007.08.084 ↗
7. M.S. Dargusch, G. Dour, N. Schauer, C.M. Dinnis and G. Savage: J. Mater. Process. Technol., 2006, vol. 180, pp. 37-43.10.1016/j.jmatprotec.2006.05.001 ↗
8. D.R. Gunasegaram, B.R. Finnin and F.B. Polivka: Mater. Sci. Technol., 2007, vol. 23(7), pp. 847-856.10.1179/174328407X176992 ↗
9. R. Lumley, N. Deeva and M. Gershenzon: Int. J. Metalcasting, 2011, vol. 5(3), pp. 37-56.10.1007/BF03355517 ↗
10. Ł. Pałyga, M. Stachowicz and K. Granat: Arch. Foundry Eng., 2015, vol. 15(2), pp. 85-90.10.1515/afe-2015-0044 ↗
11. Z.P. Guo, S.M. Xiong, B.C. Liu, M. Li and J. Allison: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2896-2905.10.1007/s11661-008-9640-0 ↗
12. A. Hamasaiid, G. Dour, M.S. Dargusch, T. Loulou, C. Davidson and G. Savage: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 853-864.10.1007/s11661-007-9452-7 ↗
13. L.W. Garber: Die Cast. Eng., 1982, vol. 26(3), pp. 14-15.
14. R. Zamora, F. Faura, J. López and J. Hernández: Int. J. Adv. Manuf. Technol., 2007, vol. 33(3-4), pp. 266-276.10.1007/s00170-006-0456-z ↗
15. A.J. Nikroo, M. Akhlaghi and M.A. Najafabadi: Int. J. Adv. Manuf. Technol., 2009, vol. 41, pp. 31-41.10.1007/s00170-008-1444-2 ↗
16. A. Krimpenis, P.G. Benardos, G.C. Vosniakos and A. Koukouvitaki: Int. J. Adv. Manuf. Technol., 2006, vol. 27(5-6), pp. 509-517.10.1007/s00170-004-2218-0 ↗
17. J. Zheng, Q. Wang, P. Zhao and C. Wu: Int. J. Adv. Manuf. Technol., 2009, vol. 44(7-8), pp. 667-674.10.1007/s00170-008-1886-6 ↗
18. R.V. Rao, V.D. Kalyankar and G. Waghmare: Appl. Math. Model., 2014, vol. 38, pp. 5592-5608.10.1016/j.apm.2014.04.036 ↗
19. J.K. Kittur, M.N. Choudhari and M.B. Parappagoudar: Int. J. Adv. Manuf. Technol., 2015, vol. 77, pp. 211-224.10.1007/s00170-014-6451-x ↗
20. J.K. Kittur, G.M. Patel and M.B. Parappagoudar: Int. J. Metalcasting, 2016, vol. 10(1), pp. 70-87.10.1007/s40962-015-0001-7 ↗
21. I. Palomba, D. Richiedei, and A. Trevisani: in: Proceedings of 26 th International Conference on Noise and Vibration Engineering (ISMA), P. Sas, H. Denayer, and D. Moens, eds., 2014, Leuven, Belgium, pp. 2899–2914.
22. S. Wu, L. Xie, J. Zhao and H. Nakae: Scr. Mater., 2008, vol. 58, pp. 556-559.10.1016/j.scriptamat.2007.11.010 ↗
23. G. Dour, M. Dargusch, C. Davidson and A. Nef: J. Mater. Process. Technol., 2005, vol. 169, pp. 223-233.10.1016/j.jmatprotec.2005.03.026 ↗
24. P. Homayonifar, R. Babaei, E. Attar, S. Shahinfar and P. Davami: Int. J. Adv. Manuf. Technol., 2008, vol. 39, pp. 219-228.10.1007/s00170-007-1214-6 ↗
25. N. Roy, A.M. Samuel and F.H. Samuel: Metall. Mater. Trans. A, 1996, vol. 27(2), pp. 415-429.10.1007/BF02648419 ↗
26. H.E. Merritt: Hydraulic control systems, Wiley, New York, 1967.
27. G. Boschetti, R. Caracciolo, D. Richiedei and A. Trevisani: Mech. Syst. Signal Process., 2013, vol. 34 (1-2), pp. 116-130.10.1016/j.ymssp.2012.07.010 ↗
28. D.C. Montgomery: Design and Analysis of Experiments, eighth ed., Wiley, New York, 2012.
29. S. Otarawanna, H.I. Laukli, C.M. Gourlay and A.K. Dahle: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1836-1846.10.1007/s11661-010-0222-6 ↗
30. D.C. Montgomery and G.C. Runger: Applied statistics and probability for engineers. John Wiley & Sons, New York, 2010.
31. J.J. Faraway: Linear models with R. CRC Press, Boca Raton, 2014.
32. L. Wu: Mixed effects models for complex data, Chapman and Hall/CRC, Boca Raton, 2009.10.1201/9781420074086 ↗
33. VDG Specification: Examples of microstructures with different pore contents. BDG-Reference Sheet, 2010, pp. 1–24.