journal article·2016-03

Effect of CVD Process Temperature on Activation Energy and Structural Growth of MWCNTs

S. Shukrullah, N. M. Mohamed, M. S. Shaharun, M. S. M. Saheed, M. I. Irshad

Publisher page

Abstract

This study investigated the effect of process temperature and activation energy on chemical vapor deposition growth of multi-walled carbon nanotubes (MWCNTs). A vertically fluidized bed reactor was used to grow MWCNTs by catalytic decomposition of ethylene over Fe2O3/Al2O3 at the cost of very low activation energy of 19.516 kJ/mole. FESEM, TEM, and Raman spectroscopy were used to characterize the growth parameters of MWCNTs in the temperature range of 873.15 K to 1273.15 K (600 °C to 1000 °C). SAED patterns were taken to investigate the crystallinity of the grown structures. The experimental results revealed that MWCNTs grown at the optimum process temperature of 1073.15 K (800 °C) exhibited hexagonal crystal structures, narrow diameter distribution and shorter inter-layer spacing. However, the inner and outer walls of most of MWCNTs grown at the temperatures above and below the optimum were non-uniform and defective. The higher process temperatures promoted the agglomeration of the catalyst particles and decomposition of the carbon precursor, which in return increased the tube diameter, surface defects and amorphous carbon content in the product. The intensity ratio plots also predicted low crystallinity in MWCNTs grown at unoptimized process temperatures. The highest I G/I D ratio of 1.43 was determined at 1073.15 K (800 °C), which reflects high pct yield, purity and crystalline growth of MWCNTs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Graphene research and applications · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. S. Iijima, Helical microtubules of graphitic carbon, Nature 354, 56-58 (1991).10.1038/354056a0 ↗
2. J. M. Rosolen, C. H. P. Poa, S. Tronto, M. S. Marchesin, and S. R. P. Silva, Electron field emission of carbon nanotubes on carbon felt, Chem. Phys. Lett. 424, 151- 155 (2006).10.1016/j.cplett.2006.04.071 ↗
3. S. Shukrullah, N. M. Mohamed, M. S. Shaharun, and M. Y. Naz, Mass production of carbon nanotubes using Fluidized bed reactor: A short review, Trends Appl. Sci. Res. 9 (3), 121-131 (2014).10.3923/tasr.2014.121.131 ↗
4. S. Shukrullah, N. M. Mohamed, and M. S. Shaharun, Optimum temperature on structural growth of multiwalled carbon nanotubes with low activation energy, Diamond Relat. Mater. 58, 129-138 (2015).10.1016/j.diamond.2015.07.005 ↗
5. K. Dasgupta, J. B. Joshi, and S. Banerjee, Fluidized bed synthesis of carbon nanotubes - A review, Chem. Eng. J. 171, 841- 869 (2011).10.1016/j.cej.2011.05.038 ↗
6. K. J. MacKenzie, O. M. Dunens, and A. T. Harris, An updated review of synthesis parameters and growth mechanisms for carbon nanotubes in fluidized beds, Ind. Eng. Chem. Res. 49, 5323 -5338 (2010).10.1021/ie9019787 ↗
7. A.A. Muataz, A. Fakhru, C. Guan, E. Mahdi, and A. Rinaldi: NANO: Brief Rep. Rev. 1, 251–257 (2006).10.1142/S1793292006000288 ↗
8. A. Nourbakhsh, B. Ganjipour, M. Zahedifar, and E. Arziz, Morphology optimization of CCVD synthesized multiwalled carbon nanotubes, using statistical design of experiments, Nanotechnology 18, 115715 (2007).10.1088/0957-4484/18/11/115715 ↗
9. K. Kim, W. S. Jung, S. Y. Bae, J. Park, J. Choi, and J. Choo, Investigation on the temperature-dependent growth rate of carbon nanotubes using chemical vapor deposition offerrocene and acetylene, Chem. Phys. Lett. 401, 459–464 (2005).10.1016/j.cplett.2004.11.113 ↗
10. S. Y. Son, Y. Lee, S. Won, and D. H. Lee, High-quality multiwalled carbon nanotubes from catalytic decomposition of carboneous materials in gas-solid fluidized beds, Ind. Eng. Chem. Res. 47, 2166–2175 (2008).10.1021/ie0711630 ↗
11. K. Liu, K. Jiang, C. Feng, Z. Chen, and S. Fan, A growth mark method for studying growth mechanism of carbon nanotubes arrays, Carbon 43, 2850–2856 (2005).10.1016/j.carbon.2005.06.002 ↗
12. L. Ni, K. Kuroda, L. P. Zhou, T. Kizuka, K. Ohta, K. Matsuishi, and J. Nakamura, Kinetic study of carbon nanotube synthesis over Mo/Co/MgO catalysts, Carbon 44(11), 2265-2272 (2006).10.1016/j.carbon.2006.02.031 ↗
13. U. Narkiewicz, W. Arabczyk, W. Konicki, and I. Kucharewicz, Studies of the kinetics of methane decomposition on the nano crystalline iron to carbon deposition formation, Rev. Adv. Mater. Sci. 8, 53 (2004).
14. V. I. Alexiadis, N. Boukos, and X. E. Verykios, Influence of the composition of Fe2O3/Al2O3 catalysts on the rate of production and quality of carbon nanotubes, Mater. Chem. Phys. 128, 96-108 (2011).10.1016/j.matchemphys.2011.02.075 ↗
15. C. T. Hsieh, Y. T. Lin, W. Y. Chen, and J. L. Wei, Parameter setting on growth of carbon nanotubes over transition metal/alumina catalysts in a fluidized bed reactor, Powder Technol., 192, 16–22 (2009).10.1016/j.powtec.2008.11.004 ↗
16. Y. T. Lee, J. Park, Y. S. Choi, H. Ryu, and H. J. Lee, Temperature – Dependent growth of vertically aligned carbon nanotubes in the range 800 – 1100°C, J. Phys. Chem. B 106, 7614 (2002).10.1021/jp020488l ↗
17. M. Kumar, and Y. Ando, Controlling the diameter distribution of carbon nanotubes grown from camphor on a zeolite support, Carbon 43, 533–540 (2005).10.1016/j.carbon.2004.10.014 ↗
18. X. Fu, X. Cui, X. Wei, and J. Ma, Investigation of low and mild temperature for synthesis of high quality carbon nanotubes by chemical vapor deposition, Appl. Surf. Sci. 292, 645– 649 (2014).10.1016/j.apsusc.2013.12.026 ↗
19. M. Bronikowski, CVD growth of carbon nanotube bundle arrays, Carbon 44, 2822-2832 (2006).10.1016/j.carbon.2006.03.022 ↗
20. O. V. Kharissova and B. I. Kharisov, Variations of interlayer spacing in carbon nanotubes, RSC Adv., 4, 30807 (2014).10.1039/C4RA04201H ↗
21. W. Qian, T. Liu, F. Wei, Z. Wang, and Y. Li, Enhanced production of carbon nanotubes: combination of catalyst reduction and methane decomposition, Appl. Catal. A., 258, 121–124 (2004).10.1016/j.apcata.2003.08.017 ↗
22. M. H. Khedr, K. S. Abdel Halim, and N. K. Soliman, Effect of temperature on the kinetics of acetylene decomposition over reduced iron oxide catalyst for the production of carbon nanotubes, Appl. Surf. Sci. 255, 2375-2381 (2008).10.1016/j.apsusc.2008.07.096 ↗
23. S. Shukrullah, N. M. Mohamed, M. S. Shaharun, and M. Y. Naz, Effect of ferrocene concentration on the quality of multiwalled CNTs grown by floating catalytic chemical vapor deposition technique, Main Group Chem. 13 (3), 251-259 (2014).10.3233/MGC-140138 ↗
24. S. L. Pirard, S. Douven, C. Bossuot, G. Heyen, and J.P. Pirard, A kinetic study of multi- walled carbon naotube synthesis by catalytic chemical vapor deposition using a Fe- Co/ Al2O3 catalyst, Carbon 45, 1167–1175 (2007).10.1016/j.carbon.2007.02.021 ↗
25. J. Nørskov, Covalent effects in the effective-medium theory of chemical binding: Hydrogen heats of solution in the 3d metals, Phys. Rev. B. 26(6), 2875 (1982).10.1103/PhysRevB.26.2875 ↗
26. D. J. Mowbray, J. I. Martinez, F. Calle-Vallejo, J. Rossmeisl, K. S. Thygesen, K. W. Jacobsen, and J. K. Nørskov, Trends in Metal Oxide Stability for Nanorods, Nanotubes, and Surfaces, J. Phys. Chem. C. 115, 2244–2252 (2011).10.1021/jp110489u ↗