New Constitutive Model for Hot Working
Source abstract
Abstract
Based on plane regressions of a set of key points in the flow curves without using Sellars–Tegart (ST) assumptions, a new approach to determine parameters in classical two-stage constitutive equations in hot working was presented. All the parameters in constitutive equations can be obtained at different temperatures and strain rates. The flow stress and recrystallized volume fraction can be predicted when workpieces undergo different conditions during plastic deformation. Experiment data of 12 pctCr was used to verify the model. The results show that when using ST model, some bounces occurred near the critical points, while using the proposed model, the results show better precision especially in determining the characteristic points such as critical strain, peak strain, and steady stress.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. F. Roters, P. Eisenlohr, L. Hantcherli, D.D. Tjahjanto, T.R. Bieler and D. Raabe: Acta Mater., 2010, vol.58, pp.1152-211.10.1016/j.actamat.2009.10.058 ↗
2. M. Bambach: Acta Mater., 2013, vol.61, pp.6222-33.10.1016/j.actamat.2013.07.006 ↗
3. U.F. Kocks: J. Eng. Mater. Technol., 1976, vol. 98, pp. 76-85.10.1115/1.3443340 ↗
4. A. Laasraoui and J.J. Jonas: Metall. Trans. A, 1991, vol.22, pp.1545-58.10.1007/BF02667368 ↗
5. E.I. Poliak and J.J. Jonas: Acta Mater., 1996, vol.44, pp.127-36.10.1016/1359-6454(95)00146-7 ↗
6. J.J. Jonas, X. Quelennec, L. Jiang and Étienne Martin: Acta Mater., 2009, vol.57, pp.2748-56.10.1016/j.actamat.2009.02.033 ↗
7. M. Avrami: J. Chem. Phys., 1939, vol.7, pp.1103-12.10.1063/1.1750380 ↗
8. M.R. Barnett, G.L. Kelly and P.D. Hodgson: Scripta Mater., 2000, vol.43, pp.365-69.10.1016/S1359-6462(00)00424-3 ↗
9. G. Gottstein, M. Frommert, M. Goerdeler and N. Schäfer: Mater. Sci. Eng. A, 2004, vol.387–389, pp.604-08.10.1016/j.msea.2004.02.098 ↗
10. J.H. Beynon and C.M. Sellars: ISIJ Int., 1992, vol.32, pp.359-67.10.2355/isijinternational.32.359 ↗
11. F. Garofalo and H.A. Wriedt: Acta Metall., 1962, vol.10, pp.1007-12.10.1016/0001-6160(62)90069-X ↗
12. R. Sandström and R. Lagneborg: Acta Metall., 1975, vol.23, pp.387-98.10.1016/0001-6160(75)90132-7 ↗
13. C.M. Sellars and W.J.McG. Tegart: Mem. Sci. Rev. Métal., 1966, vol.63, pp.731-746 (in French).10.1051/metal/196663090731 ↗
14. C.M. Sellars and W.J.McG. Tegart: Int. Metall. Rev., 1972, vol.17, pp.1-24.10.1179/095066072790137765 ↗
15. C.M. Sellars and W.J. McG. Tegart: Acta Metall., 1996, vol.14, pp. 1136-38.10.1016/0001-6160(66)90207-0 ↗
16. H. Mecking and U.F. Kocks: Acta Metall., 1981, vol.29, pp.1865-75.10.1016/0001-6160(81)90112-7 ↗
17. H. Mecking and U.F. Kocks: Prog. Mater. Sci., 2003, vol.48, pp.171-273.10.1016/S0079-6425(02)00003-8 ↗
18. F. Roters, D. Raabe and G. Gottstein: Acta Mater., 2000, vol.48, pp.4181-89.10.1016/S1359-6454(00)00289-5 ↗
19. E. I. Poliak and J. J. Jonas: ISIJ Int., 2003, vol.43, pp.684–91.10.2355/isijinternational.43.684 ↗
20. E. I. Poliak and J. J. Jonas: ISIJ Int., 2003, vol.43, pp.692–700.10.2355/isijinternational.43.692 ↗
21. C. Roucoules, M. Pietrzyk and P.D. Hodgson: Mater. Sci. Eng. A, 2003, vol.339, pp.1-9.10.1016/S0921-5093(02)00120-X ↗
22. D.S. Svyetlichnyy: ISIJ Int., 2005, vol.45, pp.1187-1193.10.2355/isijinternational.45.1187 ↗
23. D.S. Svyetlichnyy: Mater. Sci. Eng. A, 2013, vol.576, pp.140-148.10.1016/j.msea.2013.04.007 ↗
24. A. Najafizadeh and J.J. Jonas: ISIJ Int., 2006, vol.46, pp.1679–84.10.2355/isijinternational.46.1679 ↗
25. H. Mirzadeh, A. Najafizadeh and M. Moazeny: Metall. Mater. Trans. A, 2009, vol.40, pp.2950-58.10.1007/s11661-009-0029-5 ↗
26. S. Solhjoo: Mater. Des., 2010, vol.31, pp.1360–64.10.1016/j.matdes.2009.09.001 ↗
27. H. Mirzadeh and A. Najafizadeh: Mater. Des., 2010, vol.31, pp.1174–79.10.1016/j.matdes.2009.09.038 ↗
28. X.G. Fan and H. Yang: Int. J. Plas., 2011, vol.27, pp.1833-52.10.1016/j.ijplas.2011.05.008 ↗
29. H.Mirzadeh, J.M. Cabrera and A. Najafizadeh: Acta Mater., 2011, vol.59, pp.6441–48.10.1016/j.actamat.2011.07.008 ↗
30. H. Mirzadeh, J.M. Cabrera and A. Najafizadeh: Metall. Mater. Trans. A, 2012, vol.43, pp.108-23.10.1007/s11661-011-0836-3 ↗
31. J.J. Jonas, C. Ghosh, X. Quelennec and V.V. Basabe: ISIJ Int., 2013, vol.53, pp.145–51.10.2355/isijinternational.53.145 ↗
32. E.S. Puchi-Cabrera, M.H. Staia, J.D. Guérin, J. Lesage, M. Dubar and D. Chicot: Int. J. Plas., 2013, vol.51, pp.145-60.10.1016/j.ijplas.2013.05.007 ↗
33. E.S. Puchi-Cabrera, M.H. Staia, J.D. Guérin, J. Lesage, M. Dubar and D. Chicot: Int. J. Plas., 2014, vol.54, pp.113-31.10.1016/j.ijplas.2013.08.011 ↗
34. C. Zener and J. Hollomon: J. Appl. Phy., 1944, vol.15, pp.22-32.10.1063/1.1707363 ↗
35. C.M. Sellars and J.A. Whiteman: Metal Sci.,1979, vol.13, pp.187-94.10.1179/msc.1979.13.3-4.187 ↗
36. J. Weertman: J. Appl. Phy., 1955, vol.26, pp.1213-17.10.1063/1.1721875 ↗
37. P. Feltham and J.D. Meakin: Acta Metall., 1959, vol.7, pp.614–27.10.1016/0001-6160(59)90131-2 ↗
38. H.J. McQueen, S. Yue, N.D. Ryan and E. Fry: J. Mater. Process. Technol., 1995, vol.53, pp.293-310.10.1016/0924-0136(95)01987-P ↗
39. A. Cingara and H.J. McQueen: J. Mater. Process. Technol., 1992, vol.36 pp.17-30.10.1016/0924-0136(92)90235-K ↗
40. I. Rieiro, O.A. Ruano, M. Eddahbi and M. Carsi: J. Mater. Process. Technol., 1998, vol.78, pp.177-83.10.1016/S0924-0136(97)00481-0 ↗
41. F. Chen, Z. Cui and S. Chen: Mater. Sci. Eng. A, 2011, vol.528, pp.5073-80.10.1016/j.msea.2011.03.008 ↗
42. C. Huang, E.B. Hawbolt, X. Chen, T.R. Meadowcroft and D.K. Matlock: Acta Mater., 2001, vol.49, pp.1445-52.10.1016/S1359-6454(01)00032-5 ↗
43. J. Liu, Z. Cui and L. Ruan: Mater. Sci. Eng. A, 2011, vol.529, pp.300-10.10.1016/j.msea.2011.09.032 ↗
44. H.J. McQueen and N.D. Ryan: Mater. Sci. Eng. A, 2002, vol.322, pp.43-63.10.1016/S0921-5093(01)01117-0 ↗
45. H. Mirzadeh, J.M. Cabrera, J.M. Prado and A. Najafizadeh: Mater. Sci. Eng. A, 2011, vol.528, pp.3876-82.10.1016/j.msea.2011.01.098 ↗
46. S. Naghdy and A. Akbarzadeh: Mater. Des., 2014, vol.53, pp.910-14.10.1016/j.matdes.2013.07.031 ↗
47. C.A.C. Imbert and H.J. McQueen: Mater. Sci. Eng. A, 2001, vol.313, pp.88-103.10.1016/S0921-5093(01)00976-5 ↗
48. G.R. Stewart, A.M. Elwazri, S. Yue and J.J. Jonas: Mater. Sci. Technol., 2006, vol.22, pp.519-24.10.1179/026708306X81478 ↗
49. J. Weertman: J. Mech. Phy. Solids, 1956, vol.4, pp. 230-34.10.1016/0022-5096(56)90031-X ↗
50. T. Takaki, C. Yoshimoto, A. Yamanaka and Y. Tomita: Int. J. Plas., 2014, vol.52, pp.105-16.10.1016/j.ijplas.2013.09.001 ↗
51. L. Donati, A. Segatori, M. El Mehtedi and L. Tomesani: Int. J. Plas., 2013, vol.46, pp.70-81.10.1016/j.ijplas.2012.11.008 ↗
52. Y. Estrin, L.S. Tóth, A. Molinari and Y. Bréchet: Acta Mater., 1998, vol.46, pp.5509-22.10.1016/S1359-6454(98)00196-7 ↗
53. S. Solhjoo: Mate. Des., 2014, vol.54, pp.390-93.10.1016/j.matdes.2013.08.055 ↗