journal article·2015-02

Influence of Casting Defects on S–N Fatigue Behavior of Ni-Al Bronze

Aritra Sarkar, Abhishek Chakrabarti, A. Nagesha, T. Saravanan, K. Arunmuthu, R. Sandhya, John Philip, M. D. Mathew, T. Jayakumar

Publisher page

Abstract

Nickel-aluminum bronze (NAB) alloys have been used extensively in marine applications such as propellers, couplings, pump casings, and pump impellers due to their good mechanical properties such as tensile strength, creep resistance, and corrosion resistance. However, there have been several instances of in-service failure of the alloy due to high cycle fatigue (HCF). The present paper aims at characterizing the casting defects in this alloy through X-ray radiography and X-ray computed tomography into distinct defect groups having particular defect size and location. HCF tests were carried out on each defect group of as-cast NAB at room temperature by varying the mean stress. A significant decrease in the HCF life was observed with an increase in the tensile mean stress, irrespective of the defect size. Further, a considerable drop in the HCF life was observed with an increase in the size of defects and proximity of the defects to the surface. However, the surface proximity indicated by location of the defect in the sample was seen to override the influence of defect size and maximum cyclic stress. This leads to huge scatter in S–N curve. For a detailed quantitative analysis of defect size and location, an empirical model is developed which was able to minimize the scatter to a significant extent. Further, a concept of critical distance is proposed, beyond which the defect would not have a deleterious consequence on the fatigue behavior. Such an approach was found to be suitable for generating S–N curves for cast NAB.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Science · Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. W.A. Nabach: The Effects of Isothermal Deformation and Annealing on the Microstructure of NAB Propeller Material, Naval Post Graduate School, US Navy, 2003.
2. “Standard Specification for Aluminium-Bronze Sand Castings”, ASTM, B-148-97 (Reapproved 2009).
3. J. Linder, M. Axelsson, and H. Nilsson: Int. J. Fatigue, 2006, vol. 28, pp. 1752–58.10.1016/j.ijfatigue.2006.01.001 ↗
4. S. Fintová, R. Konečná, and G. Nicoletto: Acta Metall., 2013, vol. 19, pp. 223–31.
5. Y. Nadot, J. Mendez, N. Ranganathan, and A.S. Beranger: Fatigue Fract. Eng. Mater. Struct., 1999, vol. 22, pp. 289–300.10.1046/j.1460-2695.1999.00162.x ↗
6. M.R. Mitchell: J. Eng. Mater. Technol. Trans. ASME, 1977, vol. 99, pp. 329–43.10.1115/1.3443549 ↗
7. L. Collini, A. Pirondi, R. Bianchi, M. Cova, and P.P. Milella: Proc. Eng., 2011, vol. 10, pp. 2898–2903.10.1016/j.proeng.2011.04.481 ↗
8. H. Mayer, M. Papakyriacou, B. Zettle, and S.E. Standz-Tschegg: Int. J. Fatigue, 2003, vol. 25, pp. 245–56.10.1016/S0142-1123(02)00054-3 ↗
9. J.F. Knott, P. Bowen, J. Luo, H. Jiang, and H.L. Sun: Mater. Sci. Forum, 2000, vol. 331–337, pp. 1401–12.10.4028/www.scientific.net/MSF.331-337.1401 ↗
10. W.J. Evans, Z.-J. Lu, J.A. Spittle, and J. Devlukia: High Cycle Fatigue of Structural Materials, The Minerals Metals and Materials Society, Warrendale, PA, 1997, pp. 445–57.
11. C.M. Sonsino and J. Ziese: Int. J. Fatigue, 1993, vol. 15, pp. 75–84.10.1016/0142-1123(93)90001-7 ↗
12. A. Chakrabarti, A. Sarkar, T. Saravanan, A. Nagesha, R. Sandhya, and T. Jayakumar: Proc. Eng., in press.
13. D.M. Lloyd, G.W. Lorimer, and N. Ridley: Met. Technol., 1980, vol. 114, pp. 114–19.10.1179/030716980803286577 ↗
14. A. Nagesha, P. Parameswaran, N. Kumar, R. Sandhya, and M.D. Mathew: Mater. High Temp., 2012, vol. 29, pp. 49–53.10.3184/096034012X13269868036418 ↗
15. G.W. Dieter: Mechanical Metallurgy, 1998, McGraw Hill Book Company (UK) limited, pp. 394–98.
16. Y. Murakami, S. Kodama, and M. Konuma: Int. J. Fatigue, 1989, vol. 11, pp. 291–98.10.1016/0142-1123(89)90054-6 ↗
17. Y. Murakami and H. Usuki: Int. J. Fatigue, 1989, vol. 11, pp. 299–307.10.1016/0142-1123(89)90055-8 ↗
18. Y. Murakami and M. Endo: Int. J. Fatigue, 1994, vol. 16, pp. 163–81.10.1016/0142-1123(94)90001-9 ↗
19. W.J. Shickworth and E. Ineson: Iron Steel Inst. Spec. Rep., 1963, vol. 77, pp. 87–103.
20. Y. Murakami and M. Endo: Eng. Fract. Mech., 1983, vol. 17, pp. 1–15.10.1016/0013-7944(83)90027-9 ↗
21. Y. Murakami and M. Endo: in The Behavior of Short Fatigue Cracks, K.J. Miller and E.R. de los Rios, eds., EGF Publication 1, Mechanical Engineering Publications, London, 1986, pp. 275–93.
22. O. Caty, J. Buffiere, E. Maire, and J. Adrien: Adv. Eng. Mater., 2011, vol. 13, pp. 194–98.10.1002/adem.201000236 ↗