Improvements in microstructure homogenization and mechanical properties of diffusion-alloyed steel compact by the addition of Cr-containing powders
Source abstract
Abstract
The use of diffusion-alloyed powders for fabricating powder metal parts, despite alleviating the segregation problem of the alloying elements while retaining good compressibility, still cannot attain homogeneous microstructure in as-sintered products. The presence of soft Ni-rich areas and pores causes poor mechanical properties compared to those of wrought steel counterparts. This study investigated the effects of adding 0.5 wt pct Cr, which was introduced in the 316L stainless steel powder form, on the microstructure and mechanical properties of diffusion-alloyed Fe-4Ni-1.5Cu-0.5Mo-0.5C (Metal Powder Industries Federation (MPIF) FD-0405) steels. The results show that weak Ni-rich areas were present in the Cr-free specimen when sintered at 1120 °C and 1250 °C. These areas were lean in carbon because of the strong repelling effect between Ni and C. With the addition of 316L powders, the Cr was uniformly distributed and helped eliminate the soft Ni-rich areas, particularly in specimens sintered at 1250 °C. The distribution of carbon also improved. With a more uniform distribution of Ni and C, and more homogeneous microstructure, which consisted mainly of bainite and martensite, the mechanical properties of the Fe-4Ni-1.5Cu-0.5Mo-0.5C diffusion alloy steels were improved significantly.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. R. Haynes:Powder Metall., 1989, vol. 32 (2), pp. 140–46.10.1179/pom.1989.32.2.140 ↗
2. M. Khaleghi and R. Haynes:Powder Metall., 1985, vol. 28 (4), pp. 217–23.10.1179/pom.1985.28.4.217 ↗
3. S. Berg:Adv. Powder Metall. Part. Mater., compiled by C.L. Rose and M.H. Thibodeau, MPIF, Princeton, NJ, 1999, vol. 2 (part 7), pp. 163–69.
4. N. Douib, I.J. Mellanby, and J.R. Moon:Powder Metall., 1988, vol. 32 (3), pp. 209–14.10.1179/pom.1989.32.3.209 ↗
5. E. Dudrova, M. Kabatova, and M. Kupkova:Kov. Mater., 2002, vol. 40, pp. 24–33.
6. C. Verdu, S. Carabajar, G. Lormand, and R. Fougeres:Mater. Sci. Eng., 2001, vols. 319A–321A, pp. 544–49.10.1016/S0921-5093(01)01053-X ↗
7. S. Carabajar, C. Verdu, A. Hamel, and R. Fougeres:Mater. Sci. Eng., 1998, vol. 257A, pp. 225–34.10.1016/S0921-5093(98)00846-6 ↗
8. R.C. Weast and M.J. Astle:CRC Handbook of Chemistry and Physics, 61st ed., CRC Press, Boca Raton, FL, 1980–1981, p. F-65.
9. A.L. Sozinov and V.G. Gavrilijuk:Scripta Mater., 1999, vol. 41, (6), pp. 679–83.10.1016/S1359-6462(99)00107-4 ↗
10. K. Kanno and Y. Takeda:Adv. Powder Metall. Part. Mater., compiled by V. Arnhold, C.L. Chu, W.F. Jandeska, and H.I. Sanderow, MPIF, Princeton, NJ, 2002, vol. 2 (part 13), pp. 14–22.
11. P. Ortiz and F. Castro:Powder Metall., 2004, vol. 47 (3), pp. 291–98.10.1179/003258904225020747 ↗
12. B. Lindqvist and K. Kanno:Adv. Powder Metall. Part. Mater., compiled by V. Arnhold, C.L. Chu, W.F. Jandeska, and H.I. Sanderow, MPIF, Princeton, NJ, 2002, part 13, pp. 278–90.
13. K.S. Hwang and M.Y. Shiau:Metall. Mater. Trans. B, 1996, vol. 27B, pp. 203–11.10.1007/BF02915046 ↗
14. P.F. Stablein, Jr. and G.C. Kuczynski:Acta Metall., 1963, vol. 11 (3), pp. 1327–37.10.1016/0001-6160(63)90027-0 ↗
15. J. Puckert, W.A. Kaysser, and G. Petzow:Int. J. Powder Metall., 1984, vol. 20 (4), pp. 301–10.
16. S.J. Jamil and G.A. Chadwick:Powder Metall., 1985, vol. 28 (2), pp. 65–71.10.1179/pom.1985.28.2.65 ↗
17. H. Kuroki, G. Han, and K. Shinozaki:Int. J. Powder Metal. Powder Technol., 1999, vol. 32 (2), pp. 57–62.
18. R.L. Lawcock and T.J. Davies:Powder Metall., 1990, vol. 33 (2), pp. 147–50.10.1179/pom.1990.33.2.147 ↗
19. C.T. Huang and K.S. Hwang:Powder Metall., 1996, vol. 39 (2), pp. 119–23.10.1179/pom.1996.39.2.119 ↗
20. N. Chawla and X. Deng:Mater. Sci. Eng., 2005, vol. 390A, pp. 98–112.10.1016/j.msea.2004.08.046 ↗
21. W.A. Spitzig, R.E. Semlser, and O. Richmond:Acta Metall., 1988, vol. 36 (5), pp. 1201–11.10.1016/0001-6160(88)90273-8 ↗
22. R.J. Bourcier, D.A. Koss, R.E. Smelser, and O. Richmond:Acta Metall., 1986, vol. 34 (12), pp. 2443–53.10.1016/0001-6160(86)90147-1 ↗
23. S. St-Laurent, P. Lemieux, and S. Pelletier:Adv. Powder Metall. Part. Mater., compiled by W.B. James and R.A. Chernenkoff, MPIF, Princeton, NJ, 2004, part 10, pp. 145–59.
24. D.A. Porter and K.E. Easterling:Phase Transformations in Metals and Alloys, 2nd ed., CRC Press, Boca Raton, FL, 1992, pp. 96–98.10.1007/978-1-4899-3051-4 ↗
25. W.F. Smith:Structure and Properties of Engineering Alloys, 2nd ed., McGraw-Hill Co., New York, NY, 1993, pp. 136–37.