journal article·2013-02

Engineered Coatings for Ni Alloys in High Temperature Reactors

Elizabeth A. Clark, James Y. Yang, Deepak Kumar, Gary S. Was, Carlos G. Levi

Publisher page

Abstract

Alloy 617 is a candidate material for the intermediate heat exchanger of the He-cooled very high temperature reactor. At target temperatures ≥1223 K (950 °C), low level impurities in the gas stream may cause carburization, decarburization, and/or oxidation of 617 with deleterious effects on its mechanical properties. The chromia scale formed naturally by 617 does not provide adequate protection in the expected environment. Alpha alumina offers a greater potential as an effective diffusion barrier with superior stability, but it requires modification of the alloy surface. This work explores two approaches to surface modification based on aluminizing, either alone or in combination with FeCrAlY cladding, followed by pre-oxidation to form alpha alumina. Both approaches yield coatings with promising diffusional stability on alloy 617. Initial corrosion studies in impure He environments reveal that the alpha alumina is stable and protects the underlying substrate in both carburizing and decarburizing environments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. T. Burchell, R.L. Bratton, R.N. Wright, and J. Wright: INL/EXT-06011701, Idaho National Laboratory, Idaho Falls, ID, 2007.
2. T.R. Allen, K. Sridharan, L. Tan, W.E. Windes, J.I. Cole, D.C. Crawford, G.S. Was: Nucl. Technol., 2008, vol. 162, pp. 342-357.10.13182/NT08-A3961 ↗
3. W. Ren, R. Swindeman: J. of Pressure Vessel Technol., 2009, vol. 131, pp. 044002-1-15.
4. W.J. Quadakkers, H. Schuster: Werkst. Korros., 1985, vol. 36, pp. 141-150.10.1002/maco.19850360402 ↗
5. D. Kumar, R. A. Adharapurapu, T. M. Pollock, G. S. Was (2011) Metall. Mater. Trans. A 42A:1245-1265.10.1007/s11661-011-0603-5 ↗
6. R. Adharapurapu, D. Kumar, J. Zhu, C.J. Torbet, G.S. Was, T.M. Pollock: Metallurgical and Materials Transactions A, 2011, vol. 42A, pp. 1229-1244.10.1007/s11661-010-0503-0 ↗
7. J. Klöwer, U. Heubner: Materials and Corrosion, 1998, vol. 49, pp. 237-245.10.1002/(SICI)1521-4176(199804)49:4<237::AID-MACO237>3.0.CO;2-5 ↗
8. P.S. Shankar, K. Natesan: Journal of Nuclear Materials, 2007, vol. 366, pp. 28-36.10.1016/j.jnucmat.2006.12.028 ↗
9. T.C. Totemeier, H. Tian: Materials Science and Engineering A, 2007, vol. 468-470, pp. 81-87.10.1016/j.msea.2006.10.170 ↗
10. G.W. Hollenberg, E.P. Simonen, G. Kalinin, A. Terlain: Fusion Engineering and Design, 1995, vol. 28, pp. 190-208.10.1016/0920-3796(94)00377-J ↗
11. A.G. Evans, D.R. Clarke, C.G. Levi: Journal of the European Ceramic Society, 2008, vol. 28, pp. 1405-1419.10.1016/j.jeurceramsoc.2007.12.023 ↗
12. P. Becker, D.J. Young: Oxidation of Metals, 2007, vol. 67, pp. 267-277.10.1007/s11085-007-9058-x ↗
13. K.S. Forcey, D.K. Ross, C.H. Wu: Journal of Nuclear Materials, 1991, vol. 182, pp. 36-51.10.1016/0022-3115(91)90413-2 ↗
14. C.F. McDonald: Applied Thermal Engineering, 1996, vol. 16, pp. 3-32.10.1016/1359-4311(95)00016-7 ↗
15. M.W. Brumm, H.J. Grabke: Corrosion, 1992, vol. 33, pp. 1677-1690.10.1016/0010-938X(92)90002-K ↗
16. J.C. Yang, E. Schumann, I. Levin, M. Rühle: Acta Materialia, 1998, vol. 46, pp. 2195-2201.10.1016/S1359-6454(97)00378-9 ↗
17. H.J. Grabke: Intermetallics, 1999, vol. 7, pp. 1153-1158.10.1016/S0966-9795(99)00037-0 ↗
18. V.K. Tolpygo, D.R. Clarke: Materials at High Temperatures, 2000, vol. 17, pp. 59-70.10.1179/mht.2000.011 ↗
19. F.H. Stott, G.C. Wood, M.G. Hobby: Oxidation of Metals, 1971, vol. 3, pp. 103-113.10.1007/BF00603481 ↗
20. G.W. Goward, D.H. Boone: Oxidation of Metals, 1971, vol. 3, pp. 475-495.10.1007/BF00604047 ↗
21. D. Kumar, C.J. Torbet, G.S. Was (2009) Measurement Science and Technology 20:095708–095708.
22. W.J. Quadakkers, H. Schuster: Werkstoffe und Korrosion, 1885, vol. 36, pp. 335-347.10.1002/maco.19850360802 ↗
23. N.S. Jacobson, J.L. Smialek, J.I. Eldridge, D.L. Humphrey: Oxidation of Metals, 2008, vol. 69, pp. 343-358.10.1007/s11085-008-9101-6 ↗
24. L. Bencze, D.D. Raj, D. Kath, W.A. Oates, L. Singheiser, K. Hilpert: Metallurgical and Materials Transactions B, 2004, vol. 35, pp. 867-876.10.1007/s11663-004-0081-x ↗
25. C.G. Levi, E. Sommer, S.G. Terry, A. Catanoiu, M. Rühle: Journal of the American Ceramic Society, 2002, vol. 86, pp. 676-85.10.1111/j.1151-2916.2003.tb03357.x ↗
26. C.G. Levi: Acta Materialia, 1998, vol. 46, pp. 787-800.10.1016/S1359-6454(97)00260-7 ↗
27. J. Toscano, A.G. Naumenko, L. Singheiser, W.J. Quadakkers: Materials and Corrosion, 2008, vol. 59, pp. 501-507.10.1002/maco.200804134 ↗
28. A. Chien, D. Gan, P. Shen: Materials Science and Engineering, 1996, vol. A206, pp. 215-224.10.1016/0921-5093(95)09899-2 ↗
29. T. Narita, K.Z. Thosin, L. Fengqun, S. Hayashi, H. Murakami, B. Gleeson, D. Young: Materials and Corrosion, 2005, vol. 56, pp. 923-929.10.1002/maco.200503924 ↗
30. T.S. Jo, S.J. Kim, Y.D. Kim: Surface and Coatings Technology, 2011, vol. 205, pp. 4743-4749.10.1016/j.surfcoat.2011.03.017 ↗
31. A. Chien, D. Gan, P. Shen: Materials science and Engineering A, 1999, vol. A272, pp. 207-214.10.1016/S0921-5093(99)00454-2 ↗
32. H.L. Huang, Y.Z. Chen, D. Gan: Materials science and Engineering A, 2002, vol. A328, pp. 238-244.10.1016/S0921-5093(01)01699-9 ↗
33. A. Paul, A.A. Kodentsov, F.J.J. van Loo (2005) J Alloys Compd. 403:147–153.10.1016/j.jallcom.2005.04.194 ↗
34. Q.C. Xu, A. Van der Ven: Physical Review B, 2010, vol. 81, pp. 064303.10.1103/PhysRevB.81.064303 ↗
35. N.C. Oforka, C.W. Haworth: Scandinavian Journal of Metallurgy, 1987, vol. 16, pp. 184-188.
36. H.L. Huang, D. Gan: Materials Science and Engineering A, 2008, vol. 485, pp. 550-557.10.1016/j.msea.2007.09.017 ↗
37. Y. Wu, X.W. Li, G.M. Song, Y.M. Wang, T. Narita: Oxidation of Metals, 2010, vol. 74, pp. 287-303.10.1007/s11085-010-9211-9 ↗