journal article·2011-07

Modeling of the Effect of Path Planning on Thermokinetic Evolutions in Laser Powder Deposition Process

Ehsan Foroozmehr, Radovan Kovacevic

Publisher page

Abstract

A thermokinetic model coupling finite-element heat transfer with transformation kinetics is developed to determine the effect of deposition patterns on the phase-transformation kinetics of laser powder deposition (LPD) process of a hot-work tool steel. The finite-element model is used to define the temperature history of the process used in an empirical-based kinetic model to analyze the tempering effect of the heating and cooling cycles of the deposition process. An area is defined to be covered by AISI H13 on a substrate of AISI 1018 with three different deposition patterns: one section, two section, and three section. The two-section pattern divides the area of the one-section pattern into two sections, and the three-section pattern divides that area into three sections. The results show that dividing the area under deposition into smaller areas can influence the phase transformation kinetics of the process and, consequently, change the final hardness of the deposited material. The two-section pattern shows a higher average hardness than the one-section pattern, and the three-section pattern shows a fully hardened surface without significant tempered zones of low hardness. To verify the results, a microhardness test and scanning electron microscope were used.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. A.F.H. Kaplan and G. Groboth: J. Manuf. Sci. Eng. Trans. ASME, 2001, vol. 123, pp. 609-14.10.1115/1.1344899 ↗
2. M. Labudovic, D. Hu, and R. Kovacevic: J. Mater. Sci., 2003, vol. 38, pp. 35-49.10.1023/A:1021153513925 ↗
3. L. Wang and S. Felicelli: J. Manuf. Sci. Eng., 2007, vol. 129, pp. 1028-34.10.1115/1.2738962 ↗
4. J. Choi and Y. Chang: Int. J. Mach. Tool Manuf., 2004, vol. 45, pp. 597-607.10.1016/j.ijmachtools.2004.08.014 ↗
5. J. Choi and Y. Hua: J. Laser Appl., 2004, vol. 16-4, pp. 245-51.10.2351/1.1809638 ↗
6. L. Costa, T. Reti, A.M. Deus, and R. Vilar: Proc. Int. Conf. Manuf. Sci. Eng., MPIF, Princeton, NJ, 2002, pp. 172.
7. L. Costa, R. Vilar, T. Reti, R. Colaço, A.M. Deus, and I. Felde: Mater. Sci. Forum, 2005, vols. 473–474, pp. 315-20.10.4028/www.scientific.net/MSF.473-474.315 ↗
8. L. Costa, R. Vilar, T. Reti, and A.M. Deus: Acta Mater., 2005, vol. 53, pp. 3987-99.10.1016/j.actamat.2005.05.003 ↗
9. S.M. Kelly, S.S. Babu, S.A. David, T. Zacharia, and S.L. Kampe: TMS Ann. Meet., Charlotte, NC, 2004, pp. 45-52.
10. S. Ghosh and J. Choi: J. Laser Appl., 2005, vol. 17-3, pp. 144-58.10.2351/1.1961688 ↗
11. S. Ghosh and J. Choi: J. Heat Tran., 2006, vol. 128, pp. 662-79.10.1115/1.2194037 ↗
12. S. Ghosh and J. Choi: J. Manuf. Sci. Eng., 2007, vol. 129, pp. 319-32.10.1115/1.2401620 ↗
13. D.F. Watt, M. Coon, M. Bibby, J. Goldak, and C. Henwood: Acta Metall., 1988, vol. 36, pp. 3029-35.10.1016/0001-6160(88)90185-X ↗
14. E. Foroozmehr and R. Kovacevic: Metall. Mater. Trans. A, 2009, vols. 40A, pp. 1935-43.10.1007/s11661-009-9870-9 ↗
15. G.A. Roberts, G. Krasuss, and R. Kennedy: Tool Steels, ASM, Materials Park, OH, 1998.10.31399/asm.tb.ts5.9781627083584 ↗
16. R.S. Lakhkar, Y.C. Shin, and M.J.M. Krane: Mater. Sci. Eng. A, 2008, vol. 480, pp. 209-17.10.1016/j.msea.2007.07.054 ↗
17. M.A. Golozar: Principles and Applications of Heat Treatment of Steels, Isfahan Univ. Tech. Press, Isfahan, Iran, 2001.
18. W.F. Smith: Structure and Properties of Engineering Alloys, 2nd ed., McGraw-Hill, New York, NY, 1993.
19. O.O.D. Neto and R. Vilar: J. Laser Appl., 2002, vol. 14-1, pp. 46-51.10.2351/1.1436485 ↗
20. Z. Hu, G. Zhou, and P. Nash: Modeling of Casting, Welding, and Advanced Solidification Processes, XI ed., TMS, Warrendale, PA, 2006, pp. 879-86.
21. C. Cho, G. Zhao, S.Y. Kwak, and C.B. Kim: J. Mater. Process Technol., 2004, vols. 153–154, pp. 494–500.10.1016/j.jmatprotec.2004.04.016 ↗
22. M. Labudovic, D. Hu, and R. Kovacevic: Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 2000, vol. 214-8, pp. 683-92.10.1243/0954405001518062 ↗
23. S. Zekovic: Numerical Simulation and Experimental Investigation of Laser-Based Direct Metal Deposition, UMI Dissertation Services, Ann Arbor, MI, 2006.
24. Y. Lin, K.M. McHugh, Y. Zhou, and E.J. Lavernia: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1632-37.10.1007/s11661-007-9159-9 ↗
25. D. Au: Postgraduate Diploma of Research, Auckland University of Technology, Auckland, New Zealand, 2006.
26. D.P. Koistinen and R.E. Marburger: Acta Metall., 1959, vol. 7, pp. 59-60.10.1016/0001-6160(59)90170-1 ↗
27. D. Dean and M. Hidekazu: J. Comp. Mater. Sci., 2006, vol. 37, pp. 209-19.10.1016/j.commatsci.2005.06.010 ↗
28. T. Reti, M. Gergely, and P. Tardy: J. Mater. Sci. Tech., 1987, vols. 3–5, pp. 365-71.10.1179/mst.1987.3.5.365 ↗
29. T. Miokovic, V. Schulze, O. Vohringer, and D. Lohe: Mater. Sci. Eng. A, 2006, vols. 435–436, pp. 547-55.10.1016/j.msea.2006.07.037 ↗
30. L. Wang, H. Kadiri, E. Felicelli, S. Horstemeyer, and M.P. Wang: SPIE Defense and Security Symposium, Orlando, FL, 2007.
31. R. Colaco and R. Vilar: J. Mater. Sci. Lett., 1998, vol. 17, pp. 563-67.10.1023/A:1006573620796 ↗
32. G.E. Totten and M.A.H. Howes: Steel Heat Treatment Handbook, Marcel Dekker Publishers, New York, NY, 1997, pp. 632-33.
33. B.L. Bramfitt and A.O. Benscoter: Metallographer’s Guide, Practices and Procedures for Irons and Steels, ASM, Materials Park, OH, 2002.10.31399/asm.tb.mgppis.9781627082587 ↗