Fracture Toughness and Fracture Mechanism of EH47 High-Strength Steel Subjected to Different Temperatures
Source abstract
Abstract
The objective of this work was to investigate the effect of temperature on the fracture behavior of EH47 high-strength steel, which is one of the materials used for large ocean freighter decks. The fracture toughness and mechanism were studied using compact tensile (CT) specimens at different temperatures. The results showed that the fracture toughness (characterized by the crack tip opening displacement, CTOD) δ of the EH47 high-strength steel decreased with decreasing temperature and that the average values of the fracture toughness tested at different temperatures followed a Boltzmann distribution. The fracture surface analysis showed that the fracture mechanism changed from ductile fracture (above 0 °C) to ductile–brittle mixed fracture (− 20 °C to − 60 °C) and then to complete brittle fracture (below − 80 °C). In particular, the extension of fibrous cracks was the main factor affecting the fracture toughness in the transition temperature region (− 20 °C to − 60 °C). The distance from the cleavage initiation site to the fibrous crack tip increased with the fibrous crack width. Moreover, the Weibull and Boltzmann distribution functions were combined, a prediction model of the fracture toughness with different temperatures and failure probabilities was proposed, and the predicted results were in good agreement with the test results.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. T. Kawabata, T. Inoue, T. Tagawa, T. Fukui, Y. Takashima, K. Shibanuma, and S. Aihara: Mar. Struct., 2020, vol. 71, 102737.10.1016/j.marstruc.2020.102737 ↗
2. S.W. Thompson: Mater. Sci. Eng. A, 2018, vol. 711, pp. 424–33.10.1016/j.msea.2017.11.022 ↗
3. R.V. Penna, L.N. Bartlett, and T. Constance: Int. J. Metalcast., 2019, vol. 13, pp. 286–99.10.1007/s40962-018-0273-9 ↗
4. M.J. Perez-Martin, B. Erice, and F. Galvez: Eng. Fract. Mech., 2019, vol. 205, pp. 498–510.10.1016/j.engfracmech.2018.11.044 ↗
5. F.J. Witt and T.R. Mager: Nucl. Eng. Des., 1971, vol. 17, pp. 91–102.10.1016/0029-5493(71)90042-2 ↗
6. W.O. Shabbits, W.H. Pryle, and E.T. Wessel: J. Fluid Eng. Trans. ASME, 1971, vol. 93, pp. 231–36.10.1115/1.3425218 ↗
7. N.B. Shaw and G.M. Spink: Metall. Mater. Trans. A, 1983, vol. 14A, pp. 751–59.10.1007/BF02643792 ↗
8. M. Yamagiwa, M. Nakano, T. Kataoka, K. Azuma, and K. Kishida: Mater. Trans. JIM, 1990, vol. 32, pp. 61–9.10.2320/matertrans1989.32.61 ↗
9. R. Bonadé, P. Mueller, and P. Spätig: Eng. Fract. Mech., 2008, vol. 75, pp. 3985–4000.10.1016/j.engfracmech.2008.01.016 ↗
10. P. Mueller, R. Bonadé, and P. Spätig: Mater. Sci. Eng. A, 2008, vol. 483–484, pp. 346–49.10.1016/j.msea.2006.09.172 ↗
11. K.H. Lee, M.C. Kim, W.J. Yang, and B.S. Lee: Mater. Sci. Eng. A, 2013, vol. 565, pp. 158–64.10.1016/j.msea.2012.12.024 ↗
12. A. Kumar, S.G. Roberts, and A.J. Wilkinson: Int. J. Fract., 2007, vol. 144, pp. 121–29.10.1007/s10704-007-9084-3 ↗
13. G.C. Xiao, H.Y. Jing, L.Y. Xu, L. Zhao, and J.C. Ji: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3044–48.10.1016/j.msea.2010.12.075 ↗
14. S.Y. Shin, B. Hwang, S. Kim, and S. Lee: Mater. Sci. Eng. A, 2006, vol. 429, pp. 196–204.10.1016/j.msea.2006.05.086 ↗
15. Z.X. Wang, F. Xue, J. Lu, H.J. Shi, and G.G. Shu: Int. J. Damage Mech., 2010, vol. 19, pp. 611–29.10.1177/1056789509338318 ↗
16. C.C. Menzemer, T.S. Srivatsan, and R. Ortiz: Mater. Des., 2001, vol. 22, pp. 659–67.10.1016/S0261-3069(01)00011-5 ↗
17. Y.C. Jang and Y.S. Lee: Eng. Fract. Mech., 2011, vol. 78, pp. 2082–87.10.1016/j.engfracmech.2011.03.008 ↗
18. A. Lambert, A.F. Gourgues, and J. Besson: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1039–53.10.1007/s11661-004-1007-6 ↗
19. B. Djordjevic, A. Sedmak, B. Petrovski, and A. Dimic: Eng. Fail. Anal., 2021, vol. 125, 105392.10.1016/j.engfailanal.2021.105392 ↗
20. A.R. Shen, P.C. Li, G.A. Qian, Z.S. Yu, F. Berto, and W. Wu: Int. J. Press. Ves Pip., 2019, vol. 178, 103999.10.1016/j.ijpvp.2019.103999 ↗
21. M.W. Wu, Z.J. Lin, C.Y. Lin, S.X. Chi, M.K. Tsai, and K. Ni: Mater. Sci. Eng. A, 2021, vol. 814, 141182.10.1016/j.msea.2021.141182 ↗
22. W.J. Yang, B.S. Lee, M.Y. Huh, and J.H. Hong: J. Nucl. Mater., 2003, vol. 317, pp. 234–42.10.1016/S0022-3115(03)00106-5 ↗
23. J.H. Chen, G. Li, R. Cao, and X.Y. Fang: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5044–54.10.1016/j.msea.2010.04.063 ↗
24. J.H. Chen, Q. Wang, G.Z. Wang, and Z. Li: Acta Mater., 2003, vol. 51, pp. 1841–55.10.1016/S1359-6454(02)00581-5 ↗
25. D.S. Liu, M. Luo, B.G. Cheng, R. Cao, and J.H. Chen: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4918–36.10.1007/s11661-018-4823-9 ↗
26. H.T. Wang, Y. Tian, Q.B. Ye, R.D.K. Misra, Z.D. Wang, and G.D. Wang: Mater. Sci. Eng. A, 2019, vol. 761, 138009.10.1016/j.msea.2019.06.019 ↗
27. P. Spätig, G.R. Odette, and G.E. Lucas: J. Nucl. Mater., 1999, vol. 275, pp. 324–31.10.1016/S0022-3115(99)00121-X ↗
28. F. Yanagimoto, T. Hemmi, Y. Suzuki, Y. Takashima, T. Kawabata, and K. Shibanuma: Acta Mater., 2019, vol. 177, pp. 96–106.10.1016/j.actamat.2019.06.038 ↗
29. T. Iung and A. Pineau: Fatigue Fract. Eng. Mater., 1996, vol. 19, pp. 1369–81.10.1111/j.1460-2695.1996.tb00173.x ↗
30. P. Haušild, I. Nedbal, C. Berdin, and C. Prioul: Mater. Sci. Eng. A, 2002, vol. 335, pp. 164–74.10.1016/S0921-5093(01)01913-X ↗
31. M. Holzmann, L. Juràšek, and I. Dlouhý: Int. J. Fract., 2007, vol. 148, pp. 13–28.10.1007/s10704-007-9173-3 ↗
32. R. Cao, G. Li, and X.Y. Fang: Mater. Sci. Eng. A, 2013, vol. 564, pp. 509–24.10.1016/j.msea.2012.11.120 ↗
33. E. Ostby, C. Thaulow, and Z.L. Zhang: Eng. Fract. Mech., 2007, vol. 74, pp. 1770–92.10.1016/j.engfracmech.2006.09.013 ↗
34. A.J. Cooper, W.J. Brayshaw, and A.H. Sherry: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 811–16.10.1007/s11661-018-4466-x ↗
35. S.R. Yu, Z.G. Yan, R. Cao, and J.H. Chen: Eng. Fract. Mech., 2006, vol. 73, pp. 331–47.10.1016/j.engfracmech.2005.08.005 ↗
36. S. Kim, B. Hwang, and S. Lee: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1275–81.10.1007/s11661-003-0238-2 ↗
37. S. Lee, S. Kim, B. Hwang, B.S. Lee, and C.G. Lee: Acta Mater., 2002, vol. 50, pp. 4755–62.10.1016/S1359-6454(02)00313-0 ↗
38. J.H. Chen, G.Z. Wang, and H.J. Wang: Acta Mater., 1996, vol. 44, pp. 3979–89.10.1016/S1359-6454(96)00041-9 ↗
39. G.Z. Wang and J.H. Chen: Int. J. Fract., 2001, vol. 108, pp. 235–50.10.1023/A:1011033208335 ↗
40. K. Wallin: Eng. Fract. Mech., 1984, vol. 19, pp. 1085–93.10.1016/0013-7944(84)90153-X ↗
41. V.S. Barbosa and C. Ruggieri: Int. J. Press. Ves. Pip., 2020, vol. 188, 104228.10.1016/j.ijpvp.2020.104228 ↗