Effects of Crystal Orientation on Deformation Twinning and Dislocation Slip in Single Crystal Micro-pillars of a Twinning-Induced Plasticity Steel
Source abstract
Abstract
Deformation twinning and dislocation slip in twinning-induced plasticity (TWIP) steels have been shown to depend strongly on the crystal orientation, yet the underlying mechanism is still unclear. Here, we addressed this question by fabricating single crystal micro-pillars with six different crystal orientations in a coarse-grained TWIP steel sample and then conducting compression tests as well as microstructural characterization in these pillars. Depending on the crystal orientation, either twinning or slip dominates the plastic deformation. The critical stresses for twinning and slip were measured to be 147.5 ± 19.2 and 105.4 ± 11.2 MPa, respectively. It is found that the Schmid factors for the leading and trailing partial dislocations on the primary slip plane play a crucial role in the competition between twinning and slip at different orientations. Besides, the occurrence of cross-slip depends on crystal orientation through the Schmid factors for the constriction of extended dislocation cores on the primary slip plane as well as those for cross-slip on the conjugate slip plane.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. O. Bouaziz, H. Zurob, and M. Huang: Steel Res. Int., 2013, vol. 84, pp. 937–47.10.1002/srin.201200288 ↗
2. O. Bouaziz, S. Allain, C.P. Scott, P. Cugy, and D. Barbier: Curr. Opin. Solid State Mater. Sci., 2011, vol. 15, pp. 141–68.10.1016/j.cossms.2011.04.002 ↗
3. Y.S. Chun, K.-T. Park, and C.S. Lee: Scr. Mater., 2012, vol. 66, pp. 960–5.10.1016/j.scriptamat.2012.02.038 ↗
4. B.C. De Cooman, L. Chen, H.S. Kim, Y. Estrin, S.K. Kim, H. Voswinckel, in Microstructure and Texture in Steels, A. Haldar, S. Satyam, and B. Debashish, eds. (Springer, London, 2009), pp 165–83.10.1007/978-1-84882-454-6_10 ↗
5. J.G. Kim, N.A. Enikeev, J.B. Seol, M.M. Abramova, M.V. Karavaeva, R.Z. Valiev, C.G. Park, and H.S. Kim: Sci. Rep., 2018, vol. 8, p. 11200.10.1038/s41598-018-29632-y ↗
6. X. Lu, J. Zhao, Z. Wang, B. Gan, J. Zhao, G. Kang, and X. Zhang: Int. J. Plast., 2020, vol. 130, p. 102703.10.1016/j.ijplas.2020.102703 ↗
7. J. Ding, Z. Shang, J. Li, H. Wang, and X. Zhang: Mater. Sci. Eng. A., 2020, vol. 785, p. 139346.10.1016/j.msea.2020.139346 ↗
8. X. Guo, C. Sun, C. Wang, J. Jiang, and M.W. Fu: Int. J. Plast., 2021, vol. 145, p. 103076.10.1016/j.ijplas.2021.103076 ↗
9. R. Mohammadzadeh and M. Mohammadzadeh: Mater. Sci. Eng. A., 2019, vol. 747, pp. 265–75.10.1016/j.msea.2018.11.085 ↗
10. O. Bouaziz, S. Allain, and C. Scott: Scr. Mater., 2008, vol. 58, pp. 484–7.10.1016/j.scriptamat.2007.10.050 ↗
11. O. Bouaziz: Scr. Mater., 2012, vol. 66, pp. 982–5.10.1016/j.scriptamat.2011.11.029 ↗
12. I. Gutierrez-Urrutia and D. Raabe: Acta Mater., 2012, vol. 60, pp. 5791–802.10.1016/j.actamat.2012.07.018 ↗
13. Z.Y. Liang, Y.Z. Li, and M.X. Huang: Scr. Mater., 2016, vol. 112, pp. 28–31.10.1016/j.scriptamat.2015.09.003 ↗
14. I. Gutierrez-Urrutia, S. Zaefferer, and D. Raabe: Mater. Sci. Eng. A., 2010, vol. 527, pp. 3552–60.10.1016/j.msea.2010.02.041 ↗
15. D. Barbier, N. Gey, S. Allain, N. Bozzolo, and M. Humbert: Mater. Sci. Eng. A., 2009, vol. 500, pp. 196–206.10.1016/j.msea.2008.09.031 ↗
16. I. Gutierrez-Urrutia and D. Raabe: Acta Mater., 2011, vol. 59, pp. 6449–62.10.1016/j.actamat.2011.07.009 ↗
17. X. Wang, Z.Y. Liang, R.D. Liu, and M.X. Huang: Mater. Sci. Eng. A., 2015, vol. 647, pp. 249–55.10.1016/j.msea.2015.09.017 ↗
18. D. Kim, G.H. Jang, T. Lee, and C.S. Lee: Met. Mater. Int., 2020, vol. 26, pp. 1741–8.10.1007/s12540-019-00514-w ↗
19. G.I. Taylor: Plastic Strain in Metals, 1938.
20. M.D. Uchic, D.M. Dimiduk, J.N. Florando, and W.D. Nix: Science., 2004, vol. 305, pp. 986–9.10.1126/science.1098993 ↗
21. J.R. Greer and J.T.M. De Hosson: Prog. Mater Sci., 2011, vol. 56, pp. 654–724.10.1016/j.pmatsci.2011.01.005 ↗
22. S.Z. Wu, H.W. Yen, M.X. Huang, and A.H.W. Ngan: Scr. Mater., 2012, vol. 67, pp. 641–4.10.1016/j.scriptamat.2012.07.023 ↗
23. Z.Y. Liang and M.X. Huang: J. Mech. Phys. Solids., 2015, vol. 85, pp. 128–42.10.1016/j.jmps.2015.09.004 ↗
24. W.S. Choi, B.C. De Cooman, S. Sandlöbes, and D. Raabe: Acta Mater., 2015, vol. 98, pp. 391–404.10.1016/j.actamat.2015.06.065 ↗
25. A. Dumay, J.P. Chateau, S. Allain, S. Migot, and O. Bouaziz: Mater. Sci. Eng. A., 2008, vol. 483–484, pp. 184–7.10.1016/j.msea.2006.12.170 ↗
26. Z.Y. Liang, J.T.M. De Hosson, and M.X. Huang: Acta Mater., 2017, vol. 129, pp. 1–10.10.1016/j.actamat.2017.02.063 ↗
27. W.S. Choi, S. Sandlöbes, N.V. Malyar, C. Kirchlechner, S. Korte-Kerzel, G. Dehm, B.C. De Cooman, and D. Raabe: Acta Mater., 2017, vol. 132, pp. 162–73.10.1016/j.actamat.2017.04.043 ↗
28. Q. Yu, Z.-W. Shan, J. Li, X. Huang, L. Xiao, J. Sun, and E. Ma: Nature, 2010, vol. 463, pp. 335–38.10.1038/nature08692 ↗
29. M.D. Uchic, P.A. Shade, and D.M. Dimiduk: Annu. Rev. Mater. Res., 2009, vol. 39, pp. 361–86.10.1146/annurev-matsci-082908-145422 ↗
30. J.R. Greer, W.C. Oliver, and W.D. Nix: Acta Mater., 2005, vol. 53, pp. 1821–30.10.1016/j.actamat.2004.12.031 ↗
31. Z.C. Luo and M.X. Huang: Scr. Mater., 2018, vol. 142, pp. 28–31.10.1016/j.scriptamat.2017.08.017 ↗
32. Z.C. Luo and M.X. Huang: Scr. Mater., 2020, vol. 178, pp. 264–8.10.1016/j.scriptamat.2019.11.047 ↗
33. M. Madivala, A. Schwedt, U. Prahl, and W. Bleck: Int. J. Plast., 2019, vol. 115, pp. 178–99.10.1016/j.ijplas.2018.11.015 ↗
34. L. Tang, Li. Wang, M. Wang, H. Liu, S. Kabra, Y. Chiu, and B. Cai: Acta Mater., 2020, vol. 200, pp. 943–58.10.1016/j.actamat.2020.09.075 ↗
35. I. Karaman, H. Sehitoglu, K. Gall, Y.I. Chumlyakov, and H.J. Maier: Acta Mater., 2000, vol. 48, pp. 1345–59.10.1016/S1359-6454(99)00383-3 ↗
36. J.P. Hirth and J. Lothe: Theory of Dislocation, Wiley, New York, 1982.
37. T.S. Byun: Acta Mater., 2003, vol. 51, pp. 3063–71.10.1016/S1359-6454(03)00117-4 ↗