Microstructural Changes During Short-Term Heat Treatment of Martensitic Stainless Steel—Simulation and Experimental Verification
Source abstract
Abstract
Abstract Short-term heat treatments of steels are used for tools and cutlery but also for the surface treatment of a variety of other workpieces. If corrosion resistance is required, martensitic stainless steels like AISI 420L or AISI 420MoV are typically used. The influence of short-term heat treatment on the different metastable states of the AISI 420L steel was examined and reported in this article. Starting from a defined microstructural state, the influence of a short-term heat treatment is investigated experimentally with the help of a quenching dilatometer and computer assisted simulations are carried out. With the results obtained, a simulation model is built up which allows to compute the microstructural changes during a short-term heat treatment to be evaluated without the need for an experiment. As an indicator, the value of the martensite start temperature is calculated as a function of different holding times at austenitizing temperature. The martensite start temperature is measured by dilatometry and compared to calculated values. Validation of simulated results reveals the potential of optimizing steel heat treatment processes and provides a reliable approach to save time, resources and energy.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. H. Berns, W. Theisen, Eisenwerkstoffe (Stahl und Gusseisen, Springer Vieweg, 2008).
2. H.G. Bauer, W. Schadt, Walzen von Flachprodukten (Springer Verlag, 2017).10.1007/978-3-662-48091-5 ↗
3. Z.-K. Liu, L. Hoglund, B. Jönsson, J. Ågren, Metallurgical Transactions A 22A(8), 1745–1752 (1991)10.1007/BF02646498 ↗
4. U.R. Lenel, R.W.K. Honeycombe, Metal Science 18(4), 201–206 (1984)10.1179/030634584790420159 ↗
5. C. Garcìa, L. Alvarez, M. Carsi, Welding International 6(8), 612–621 (1992)10.1080/09507119209548251 ↗
6. P. Rosemann, N. Kauss, C. Müller, T. Halle, Conference Paper: 16. Sommerkurs Werkstoffe und Fügen 71–78 (2017)
7. A. Schneider, G. Inden, Acta Materialia 53, 519–531 (2015)10.1016/j.actamat.2004.10.008 ↗
8. A. Kamyabi-Gol, D. Herath, P.F. Mendez, Canadian Metallurgical Quarterly 56(1), 85–93 (2016)10.1080/00084433.2016.1267903 ↗
9. T. Sourmail, V. Smanio, Materials Science and Technology 29(7), 883–888 (2013)10.1179/1743284713Y.0000000209 ↗
10. A. Kamyabi-Gol, S. Clark, J. Gibbs, S. Sridhar, P. Mendez, Acta Materialia 102, 231–240 (2015)10.1016/j.actamat.2015.09.025 ↗
11. J. R. J. Marcuci, E. C. de Souza, C. C. Camilo, P. L. D. Lorenzo, J. ao Manuel Domingos de Almeida Rollo, Engenharia Biomédica 30 (3) (2014) 257–64.10.1590/rbeb.2014.025 ↗
12. T.A. Kop, J. Sietsma, S. van der Zwaag, Journal of Materials Science 36, 519–526 (2001)10.1023/A:1004805402404 ↗
13. ASTM International, ASTM A1033-18 Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations 1 (2018).
14. H.S. Yang, H.K.D.H. Bhadeshia, Materials Science and Technology 23(5), 556–560 (2007)10.1179/174328407X176857 ↗
15. J. Orlich, H.-J. Pietrzeniuk, Atlas zur wärmebehandlung der stähle - band 4, 2. teil (1976).
16. L. Yuan, Nanoscale austenite reversion through partitioning, segregation and kinetic freezing in martensitic stainless steels, Dissertation, RWTH Aachen, (2012).
17. C.G. de Andrés, F. Caballero, C. Capdevila, L. Álvarez, Materials Characterization 48, 101–111 (2002)10.1016/S1044-5803(02)00259-0 ↗
18. C.G. de Andrés, J. Jiménez, L. Álvarez, Metallurgical and materials transactions A 31(1), 53–74 (1996)
19. G. Gottstein, Materialwissenschaften und Werkstofftechnik - Physikalische Grundlagen, Springer Vieweg, (2014).10.1007/978-3-642-36603-1 ↗
20. G. B. Olson, W. S. Owen (Eds.), Martensitic Nucleation, ASM International, 1992, Ch. 9, pp. 149–74.
21. O.D. Sherby, J. Wadsworth, D.R. Lesuer, C.K. Syn, Materials Transactions 49(9), 2016–2027 (2008)10.2320/matertrans.MRA2007338 ↗
22. M. Belde, H. Springer, G. Inden, D. Raabe, Acta Materialia 86, 1–14 (2015)10.1016/j.actamat.2014.11.025 ↗
23. A.M. Bettanini, L. Ding, J.-D. Mithieux, C. Parrens, H. Idrissi, D. Schryvers, L. Delannay, T. Pardoen, P.J. Jacques, Materials and Design 162, 362–374 (2019)10.1016/j.matdes.2018.12.005 ↗
24. M. Hemmleb, Photogrammetrische auswertung elektronenmikroskopischer bilddaten, Dissertation, TU Berlin, (2001).
25. K. Ishida, Journal of Alloys and Compounds 220, 126–134 (1995)10.1016/0925-8388(94)06002-9 ↗
26. A. Bjärbo, M. Hättestrand, Metallurgical and materials transactions A 32, 19–27 (1999)10.1007/s11661-001-0247-y ↗
27. S. Papaefthymiou, M. Bouzouni, R.H. Petrov, Metals 8(8), 646 (2018)10.3390/met8080646 ↗
28. S.B. Hosseinia, R. Dahlgrena, K. Ryttbergb, U. Klemen, Procedia CIRP 14, 107–112 (2014)10.1016/j.procir.2014.03.095 ↗