Combined Effect of Sodium Lauryl Sulphate and Saccharin on Microstructure and Corrosion Performance of Electrodeposited Nickel Prepared from Modified Watts Bath
Source abstract
Abstract
Additives in Watts bath influence the surface properties of the electrodeposited nanocrystalline nickel. The changes in the properties are led by the alteration in the nucleation and plating over-potentials ( $$ En $$ & $$ Ep $$ ). A galvanodynamic polarization technique was used to determine the $$ En $$ & $$ Ep $$ in the modified Watts bath. From all the commercially available additives, sodium lauryl sulfate (SLS) was used as an anti-pitting agent, and saccharin (SAC) was added as a grain refiner. The concentration of SAC was varied in the range from 1.5 to 10 $$ {\text{ml}}/{\text{l}} $$ while keeping SLS concentration constant at 1.1 $$ {\text{g}}/{\text{l}} $$ in order to see its effect on polarization potentials, surface roughness, and corrosion behavior. Refinement of surface roughness and crystallite size, corresponding to steady values of $$ En $$ & $$ Ep $$ was obtained for SAC at 3 ml/l and SLS at 1.1 g/l. The deposits with fine crystallite size showed minimal passivation current density and highest polarization resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition · Anodic Oxide Films and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Z. Ahmad: Principles of Corrosion Engineering and Corrosion Control, 1st ed., Elsevier/ Butterworth-Heinemann, 2006, pp. 382–437.10.1016/B978-075065924-6/50008-8 ↗
2. O. S. I. Fayomi, I. G. Akande, and A. A. Sode: J. Phys. Conf. Ser., 2019, vol. 1378, p. 022063.10.1088/1742-6596/1378/2/022063 ↗
3. M. J. Cruz, I. V. Makarova, D. S. Kharitonov, I. Dobryden, A. A. Chernik, M. Grageda, and S. Ushak: Surf. Interface Anal., 2019, vol. 51(9), pp. 943–53.10.1002/sia.6683 ↗
4. Y. Wang, Z. Gu, Y. Xin, N. Yuan, and J. Ding: Colloids Surfaces A Physicochem. Eng. Asp., 2018, vol. 538, pp. 500–5.10.1016/j.colsurfa.2017.11.055 ↗
5. Y. K. Wei, Y. J. Li, Y. Zhang, X. T. Luo, and C. J. Li: Corros. Sci., 2018, vol. 138, pp. 105–15.10.1016/j.corsci.2018.04.018 ↗
6. G. Zangari: Encyclopedia of Interfacial Chemistry: Surface Science and Electrochemistry, 1st ed., Elsevier, Amsterdam, Netherlands, 2018, pp. 141–60.10.1016/B978-0-12-409547-2.11700-7 ↗
7. L. Guo and P. C. Searson: Electrochim. Acta, 2010, vol. 55(13), pp. 4086–91.10.1016/j.electacta.2010.02.038 ↗
8. M. S. Moats and A. Derrick: Electrometallurgy, 1st ed., Wiley, New York, 2012, pp. 125–37.10.1002/9781118371350.ch14 ↗
9. X. Zhou, Y. Wang, Z. Liang, and H. Jin: Materials (Basel)., 2018, vol. 11(7), p. 1124.10.3390/ma11071124 ↗
10. L. Yuan, Z. Y. Ding, S. J. Liu, W. F. Shu, and Y. N. He: Trans. Nonferrous Met. Soc. China (English Ed.), 2017, vol. 27(7), pp. 1656–64.10.1016/S1003-6326(17)60188-2 ↗
11. P. A. Adcock, A. Quillinan, B. Clark, O. M. G. Newman, and S. B. Adeloju: J. Appl. Electrochem., 2004, vol. 34(8), pp. 771–80.10.1023/B:JACH.0000035604.53451.25 ↗
12. L. Schoeman, E. N. Nsiengani, K. C. Sole, and R. Sandenbergh: Hydrometallurgy, 2020, vol. 194, p. 105332.10.1016/j.hydromet.2020.105332 ↗
13. L. Schoeman and K. C. Sole: Can. Metall. Q., 2017, vol. 56(4), pp. 393–400.10.1080/00084433.2017.1361179 ↗
14. D. E. Rusu, A. Ispas, A. Bund, C. Gheorghies, and G. Cârâ: J. Coat. Technol. Res., 2012, vol. 9(1), pp. 87–95.10.1007/s11998-011-9343-0 ↗
15. R. Mishra and R. Balasubramaniam: Corros. Sci., 2004, vol. 46(12), pp. 3019–29.10.1016/j.corsci.2004.04.007 ↗
16. E. P. S. Schmitz, S. P. Quinaia, J. R. Garcia, C. K. De Andrade, and M. C. Lopes: Int. J. Electrochem. Sci, 2016, vol. 11, pp. 983–97.10.1016/S1452-3981(23)15899-8 ↗
17. A. Ciszewski, S. Posluszny, G. Milczarek, and M. Baraniak: Surf. Coat. Technol., 2004, vol. 183(2–3), pp. 127–33.10.1016/j.surfcoat.2003.09.054 ↗
18. D. H. Nam, K. S. Hong, J. S. Kim, J. L. Lee, G. E. Kim, and H. S. Kwon: Surf. Coatings Technol., 2014, vol. 248, pp. 30–7.10.1016/j.surfcoat.2014.03.031 ↗
19. R. Elansezhian, B. Ramamoorthy, and P. K. Nair: J. Mater. Process. Technol., 2009, vol. 209(1), pp. 233–40.10.1016/j.jmatprotec.2008.01.057 ↗
20. J. Sudagar, J. S. Lian, Q. Jiang, Z. H. Jiang, G. Y. Li, and R. Elansezhian: Progress in Organic Coatings, 2012, vol. 74(4), pp. 788–93.10.1016/j.porgcoat.2011.10.022 ↗
21. K. Sarkar, A. Mondal, A. Chakraborty, M. Sanbui, N. Rani, and M. Dutta: Surf. Coatings Technol., 2018, vol. 348, pp. 64–72.10.1016/j.surfcoat.2018.05.036 ↗
22. J. R. López, P. F. Méndez, J. J. P. Bueno, G. Trejo, R. Antaño, J. Torres-González, G. Stremsdoerfer, and Y. Meas: J. Electrochem. Soc., 2017, vol. 164(7), pp. D524–D31.10.1149/2.0231709jes ↗
23. R. Solmaz, E. Altunba, and G. Karda: Mater. Chem. Phys., 2011, vol. 125(3), pp. 796–801.10.1016/j.matchemphys.2010.09.056 ↗
24. A. Zarebidaki, H. Mahmoudikohani, and M. R. Aboutalebi: J. Alloys Compd., 2014, vol. 615, pp. 825–30.10.1016/j.jallcom.2014.07.046 ↗
25. W. R. Tyson and W. A. Miller: Surf. Sci., 1977, vol. 62(1), pp. 267–76.10.1016/0039-6028(77)90442-3 ↗
26. S. M. Hassan Zadeh Shirazi, M. E. Bahrololoom, and M. H. Shariat: Surf. Eng. Appl. Electrochem., 2016, vol. 52(5), pp. 434–42.10.3103/S1068375516050112 ↗
27. Y. Li, J. Yao, and X. Huang: Int. J. Metall. Mater. Eng., 2016, vol. 2(1), p. 123.10.15344/2455-2372/2016/123 ↗
28. U. S. Mohanty, B. C. Tripathy, P. Singh, A. Keshavarz, and S. Iglauer: Journal of Applied Electrochemistry, 2019, vol. 49(9), pp. 847–70.10.1007/s10800-019-01335-w ↗
29. L. Yuan, J. Hu, Z. Ding, and S. Liu: Int. J. Electrochem. Sci, 2017, vol. 12, pp. 7312–25.10.20964/2017.08.56 ↗
30. L. H. Mendoza-Huizar and C. H. Rios-Reyes: Cent. Eur. J. Chem., 2013, vol. 11(8), pp. 1381–92.
31. H. Fischer and H. F. Heiling: Trans. IMF, 1954, vol. 31(1), pp. 90–105.10.1080/00202967.1954.11869631 ↗
32. P. A. Adcock, S. B. Adeloju, and O. M. G. Newman: J. Appl. Electrochem., 2002, vol. 32(10), pp. 1101–07.10.1023/A:1021251603240 ↗
33. X. Huang, Y. Chen, J. Zhou, Z. Zhang, and J. Zhang: J. Electroanal. Chem., 2013, vol. 709, pp. 83–92.10.1016/j.jelechem.2013.09.012 ↗
34. L.K. Wu, W.K. Wang, H.Z. Cao, G.Y. Hou, Y.P. Tang, and G.Q. Zheng: J. Electrochem. Soc., 2016, vol. 163(14), pp. D829–D35.10.1149/2.1121614jes ↗
35. R. G. Kelly, J. R. Scully, D. Shoesmith, and R. G. Buchheit: Electrochemical Techniques in Corrosion Science and Engineering, 1st ed., CRC Press, New York, NY, 2002, pp. 55-123.10.1201/9780203909133 ↗
36. S. Esmailzadeh, M. Aliofkhazraei, and H. Sarlak: Prot. Met. Phys. Chem. Surfaces, 2018, vol. 54(5), pp. 976–89.10.1134/S207020511805026X ↗
37. K. D. Ralston, N. Birbilis, and C. H. J. Davies: Scr. Mater., 2010, vol. 63(12), pp. 1201–04.10.1016/j.scriptamat.2010.08.035 ↗
38. [38] S. Gollapudi: Corros. Sci., 2012, vol. 62, pp. 90–4.10.1016/j.corsci.2012.04.040 ↗
39. [39] S. Gollapudi, W. Cai, S. Patibanda, K. V. Rajulapati, and L. Neelakantan: Emergent Mater., 2020, vol. 3(6), pp. 989–97.10.1007/s42247-020-00135-9 ↗
40. B. I. Onyeachu, E. E. Oguzie, I. C. Ukaga, D. I. Njoku, and X. Peng: Port. Electrochim. Acta, 2017, vol. 35(3), pp. 127–36.10.4152/pea.201703127 ↗
41. [41] Y. Zhang, Z. Xiao, Y. Zhao, Z. Li, Y. Xing, and K. Zhou: Mater. Chem. Phys., 2017, vol. 199, pp. 54–66.10.1016/j.matchemphys.2017.06.041 ↗