The Effect of Dissolved Nitrogen on the Fatigue Behavior of Ti-6Al-4V
Source abstract
Abstract
Abstract The effect of nitrogen additions on fatigue behavior has been examined in near-equiaxed, rolled Ti-6Al-4V bar. This is the first-time nitrogen content that has been systematically explored with respect to monotonic and cyclic properties in a Ti-6Al-4V alloy base composition. Nitrogen additions were found to increase the $$\beta $$-transus temperature and strength, but they decreased ductility, even in microstructures where some $$\beta $$ phase remained. This carried across into both the low- and high cycle fatigue behavior; even small contents of 240 and 560 ppmwN caused reductions in both low cycle fatigue life and high cycle fatigue strength. In samples containing 240 and 560 ppmwN, a conventional striated fractographic appearance was observed, but a dramatic change to a macroscopically brittle fracture surface was observed at 1800 and 3600 ppmwN, but still with substantial evidence of plasticity at the microscale. Therefore, neither microstructure or fractographic examination, nor EDX-based compositional analysis in the electron microscope are necessarily a reliable indicator of an absence of deleterious nitrogen contamination. This is significant for the investigation of potentially nitrogen-contaminated surface-initiated cracks, either due to service or processing exposures.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. R.O. Ritchie, Metall. Trans. A, 8 (1977) 1131–1139.10.1007/BF02667398 ↗
2. A. McQuillan, M. McQuillan, Metallurgy of the Rarer Metals No 4: Titanium, 1st edn, Butterworths Scientific Publications, London (1956).
3. W. Finlay, J. Snyder (1950), Trans. Am. Inst. Min. Metall. Eng. 188, 277.
4. R. Ogden, H.R. Jaffee, D. Maykuth, Trans. Am. Inst. Min. Metall. Eng. 188, 1261 (1950).
5. R. J. Van Thyne, H. D. Kessler, Trans. Am. Inst. Min. Metall Eng. 200 (1954) 193.
6. R. Jaffee, Prog. Met. Phys. 7 (1958) 65–163.10.1016/0502-8205(58)90004-2 ↗
7. H. Conrad, Prog. Mater. Sci. 26 (1981) 123–403.10.1016/0079-6425(81)90001-3 ↗
8. S.K. Nayak, C.J. Hung, V. Sharma, S.P. Alpay, A.M. Dongare, W.J. Brindley, R.J. Hebert, NPJ Comput Mater. 4:11 (2018).10.1038/s41524-018-0068-9 ↗
9. I. Bantounas, T. Lindley, D. Rugg, D. Dye, Acta Mater. 55 (2007) 5655–5665.10.1016/j.actamat.2007.06.034 ↗
10. I. Bantounas: Microtexture and High Cycle Fatigue Cracking in Ti–6Al–4V. Ph.D. Thesis, Imperial College London, 2008.10.1016/j.actamat.2007.06.034 ↗
11. ASTM E1409-13: Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion, ASTM Standards, 2013, pp. 1–7.
12. H.D. Kessler, W. Roster, R.J. Van Thyne, Titanium Phase Diagrams. Armour Research Foundation, WADC Technical Report 52–335, 1953. Available from https://apps.dtic.mil/dtic/tr/fulltext/u2/029976.pdf.
13. H.A. Wriedt, J.L. Murray, Bull. Alloy Phase Diagr. 8 (1987) 378–388.10.1007/BF02869274 ↗
14. C. Dichtl, Z. Zhang, H. Gardner, P. Bagot, A. Radecka, D. Dye, M. Thomas, R. Sandala, J.Q. da Fonseca, M. Preuss, Mater. Charact. 164 (2020) 110327.10.1016/j.matchar.2020.110327 ↗
15. D. Rugg, T.B. Britton, J. Gong, A.J. Wilkinson, P.A. Bagot, Mater. Sci. Eng. A 599 (2014) 166–173.10.1016/j.msea.2014.01.031 ↗
16. T. Nicholas, High Cycle Fatigue: A Mechanics of Materials Perspective (Elsevier, Amsterdam, 2006).
17. ISO: ISO GUIDE 31:2015 Reference Materials—Contents of Certificates, Labels and Accompanying Documentation. Technical Report, ISO, 2015.
18. ISO: ISO 17034:2016 General Requirements for the Competence of Reference Material Producers. Technical Report, ISO, 2016.
19. ISO: ISO/IEC 17025:2017 General Requirements for the Competence of Testing and Calibration Laboratories. Technical Report, ISO, 2017.
20. J. Pauwels, BCR-059 the Certification of Oxygen in Non-ferrous Metals Technical Report, Joint Research Centre-Central Bureau for Nuclear Measurements, Geel, 1979.
21. T.D. McKinley, J. Electrochem. Soc. 103 (1956) 561.10.1149/1.2430157 ↗
22. P.H. DeVries, K.T. Ruth, D.P. Dennies, J. Fail. Anal. Prev. 10 (2010) 120–137.10.1007/s11668-009-9320-4 ↗