journal article·2020-12

Validation of Novel Geometrically Necessary Dislocations Calculation Model Using Nanoindentation of the Metal Matrix Nanocomposite

Harprabhjot Singh, Deepak Kumar

Publisher page

Abstract

The present work aims to develop a geometrically necessary dislocations (GNDs) generation model to accommodate the mismatch of the coefficient of thermal expansion (CTE) and elastic modulus between the matrix and reinforcement. Interstitial prismatic loops have been punched in the spherical ceramic reinforced matrix. The developed model is verified using nanoindentation experimentation into the metal matrix nanocomposite (MMnC). The nanoreinforcements are in-situ developed into the Mg matrix. As per hypothesis, Taylor strengthening dominates the Orowan and Hall–Petch strengthening. The experimentally obtained yield strength is very close to the theoretically estimated one.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. T.W. Clyne and P.J. Withers: An Introduction to Metal Matrix Composites. Cambridge: Cambridge University Press, 1993.10.1017/CBO9780511623080 ↗
2. N.M. Chelliah, H. Singh, and M.K. Surappa: Mater. Chem. Phys., 2017, vol. 194, pp. 65–76.10.1016/j.matchemphys.2017.03.025 ↗
3. N. Tahreen, D.F. Zhang, F.S. Pan, X.Q. Jiang, D.Y. Li, and D.L. Chen: J. Mater. Sci. Technol., 2018, vol. 34, pp. 1110–18.10.1016/j.jmst.2017.12.005 ↗
4. M.F. Ashby: Phil. Mag., 1969, vol. 21, pp. 399–424.10.1080/14786437008238426 ↗
5. G.I. Taylor: Proc. R. Soc. London, Ser. A, 1934, vol. 145, pp. 362–404.10.1098/rspa.1934.0106 ↗
6. R.J. Arsenault and N. Shi: Mater. Sci. Eng., 1986, vol. 81, pp. 175–87.10.1016/0025-5416(86)90261-2 ↗
7. W.S. Miller and F.J. Humphreys: Scripta Metall. Mater., 1991, vol. 25, pp. 33–38.10.1016/0956-716X(91)90349-6 ↗
8. L.H. Dai, Z. Ling, and Y.L. Bai: Compos. Sci. Technol., 2001, vol. 61, pp. 1057–63.10.1016/S0266-3538(00)00235-9 ↗
9. A. Sanaty-Zadeh: Mater. Sci. Eng. A, 2012, vol. 531, pp. 112–18.10.1016/j.msea.2011.10.043 ↗
10. V.C. Nardone and K.M. Prewo: Scripta Metall., 1986, vol. 20, pp. 43–48.10.1016/0036-9748(86)90210-3 ↗
11. M.S. Kujur, V. Manakari, G. Parande, K.S. Tun, A. Mallick, and M. Gupta: Ceram. Int., 2018, vol. 44, pp. 15035–15043.10.1016/j.ceramint.2018.05.133 ↗
12. C.S. Goh, M. Gupta, J. Wei, and L.C. Lee: J. Compos. Mater., 2007, vol. 41, pp. 2325–35.10.1177/0021998307075445 ↗
13. J.F. Nye: Acta Metall., 1953, vol. 1, pp. 153–62.10.1016/0001-6160(53)90054-6 ↗
14. W.D. Nix and H. Gao: J. Mech. Phys. Solids, 1998, vol. 46, pp. 411–25.10.1016/S0022-5096(97)00086-0 ↗
15. H. Singh, D. Kumar, and H. Singh: J. Compos. Mater., https://doi.org/10.1177/0021998320946432.10.1177/0021998320946432 ↗
16. H. Singh, S. Kumar, and D. Kumar: Mater. Sci. Eng. A, 2020, vol. 789, pp. 1–9.10.1016/j.msea.2020.139577 ↗
17. U.C. Archiopoli, N. Mingolo, and O.E. Martínez: Surf. Coat. Technol., 2011, vol. 205, pp. 3087–92.10.1016/j.surfcoat.2010.11.022 ↗
18. C.H. Cáceres, J.R. Griffiths, A.R. Pakdel, and C.J. Davidson: Mater. Sci. Eng. A, 2005, vol. 402, pp. 258–68.10.1016/j.msea.2005.04.042 ↗
19. B.Q. Han and D.C. Dunand: Mater. Sci. Eng. A, 2000, vol. 277, pp. 297–304.10.1016/S0921-5093(99)00074-X ↗
20. N.M. Chelliah, H. Singh, R. Raj, and M.K. Surappa: Mater. Sci. Eng. A, 2017, vol. 685, pp. 429–38.10.1016/j.msea.2017.01.001 ↗