In Situ Growth of Carbon Nanotubes on Ti Powder for Strengthening of Ti Matrix Composite via Nanotube–Particle Dual Morphology
Source abstract
Abstract
In situ synthesis of carbon nanotubes (CNTs) on Ti powder decorated with Ni catalyst enabled us to obtain a high-quality CNTs/Ti composite powder via fluidized bed chemical vapor deposition (FBCVD) process. The composite powder was characterized by a combination of high structural integrity and uniform dispersion of CNTs, which is not obtained by traditional ball-milling route. These advantages enabled the retention of CNTs in the near-fully dense titanium matrix composite (TMC), together with the uniform dispersion of TiC particles. The CNTs and TiC particles coordinated with each other and contributed to a synergistic effect involving load transfer from the matrix to CNTs and dispersion strengthening of TiC particles. The nanotube–particle-reinforced TMC exhibited superior mechanical properties in comparison to single-phase-reinforced TMCs. The catalytic behavior of Ni, controllable synthesis of CNTs, the retention behavior of CNTs, and the formation mechanism of TiC particles during the sintering process are discussed in detail.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. M.D. Hayatb, H. Singh, Z. He, and P. Cao: Compos. A Appl. Sci. Manuf., 2019, vol. 121, pp. 418–38.10.1016/j.compositesa.2019.04.005 ↗
2. H. Singh, M. Hayat, Z. He, V.K. Peterson, R. Das, and P. Cao: Compos. A Appl. Sci. Manuf., 2019, vol. 124, pp. 105501.10.1016/j.compositesa.2019.105501 ↗
3. X.J. Zhang, F. Song, Z.P. Wei, W.C. Yang, and Z.K. Dai: Mater. Sci. Eng. A, 2017, vol. 705, pp. 153–9.10.1016/j.msea.2017.08.079 ↗
4. L.J. Huang, L. Geng, and H.X. Peng: Prog. Mater. Sci., 2015, vol. 71, pp. 93–168.10.1016/j.pmatsci.2015.01.002 ↗
5. N. Shamsaei, A. Yadollahi, L. Bian, and S.M. Thompson: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2859–62.10.1016/j.msea.2010.12.046 ↗
6. L.J. Huang, L. Geng, H.Y. Xu, and H.X. Peng: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2859–62.10.1016/j.msea.2010.12.046 ↗
7. C. Cai, B. Song, C.L. Qiu, L.F. Li, P.J. Xue, Q.S. Wei, J.X. Zhou, H. Nan, H.X. Chen, and Y.S. Shi: J. Alloy. Compd., 2017, vol. 710, pp. 364–74.10.1016/j.jallcom.2017.03.160 ↗
8. Shirvanimoghaddam K, Hamim SU, Akbari MK, Fakhrhoseini SM, Khayyam H, Pakseresht AH, Ghasali E, Zabet M, Munir KS, Jia S, Davim JP, Naebe M (2017) Composites A 92:70–9610.1016/j.compositesa.2016.10.032 ↗
9. A. Azarniya, S. Sovizi, H.R.M. Hosseini, T. Varol, A. Kawasaki, and S. Ramakrishn: Prog. Mater. Sci., 2017, vol. 90, pp. 276–324.10.1016/j.pmatsci.2017.07.007 ↗
10. B. Chen, S.F. Li, H. Imai, L. Jia, J. Umeda, M. Takahashi, and K. Kondoh: Compos. Sci. Technol., 2015, vol. 113, pp. 1–8.10.1016/j.compscitech.2015.03.009 ↗
11. J. Xiang, Y.F. Han, J.X. Li, P.K. Qiu, X.L. Sun, and W.J. Lu: J. Alloy. Compd., 2017, vol. 723, pp. 57–66.10.1016/j.jallcom.2017.07.294 ↗
12. L. Jia, X. Li, K. Kondoh, B. Chen, S.F. Li, J. Umeda, and Z.L. Lu: Mater. Charact., 2019, vol. 151, pp. 6–14.10.1016/j.matchar.2019.02.026 ↗
13. Y. Jiao, L.J. Huang, and L. Geng: J. Alloy. Compd., 2018, vol. 767, pp. 1169–215.10.1016/j.jallcom.2018.07.100 ↗
14. S.F. Li, K. Kondoh, H. Imai, B. Chen, L. Jia, J. Umeda, and Y. Fu: Mater. Des., 2016, vol. 95, pp. 127–32.10.1016/j.matdes.2016.01.092 ↗
15. F.C. Ma, T.R. Wang, P. Liu, W. Li, X.K. Liu, X.H. Chen, D. Pan, and W.J. Lu: Mater. Sci. Eng. A, 2016, vol. 654, pp. 352–8.10.1016/j.msea.2015.12.071 ↗
16. M.Y. Koo, J.S. Park, M.K. Park, K.T. Kim, and S.H. Hong: Scr. Mater., 2012, vol. 66, pp. 487–90.10.1016/j.scriptamat.2011.12.024 ↗
17. F.C. Wang, Z.H. Zhang, Y.J. Sun, Y. Liu, Z.Y. Hu, H. Wang, A.V. Korznikov, E. Korznikova, and Z.F. Liu: Carbon, 2015, vol. 95, pp. 396–407.10.1016/j.carbon.2015.08.061 ↗
18. K. Kondoh, T. Threrujirapapong, J. Umeda, and B. Fugetsu: Compos. Sci. Technol., 2012, vol. 72, pp. 1291–7.10.1016/j.compscitech.2012.05.002 ↗
19. S.F. Li, B. Sun, H. Imai, and K. Kondoh: Carbon, 2013, vol. 61, pp. 216–28.10.1016/j.carbon.2013.04.088 ↗
20. P.M. Ajayan: Chem. Rev., 1999, vol. 99, pp. 1787–800.10.1021/cr970102g ↗
21. K.S. Munir and C. Wen: Crit. Rev. Solid State Mater. Sci., 2016, vol. 41, pp. 347–66.10.1080/10408436.2015.1127205 ↗
22. K.S. Munir, Y.C. Li, M. Qian, and C. Wen: Carbon, 2016, vol. 99, pp. 384–97.10.1016/j.carbon.2015.12.041 ↗
23. V.S.A. Challa and R.D.K. Misra: Mater. Technol., 2017, vol. 32, pp. 109–15.10.1080/10667857.2016.1143691 ↗
24. R.D.K. Misra, D. Depan, V.S.A. Challa, and J.S. Shah: Phys. Chem. Chem. Phys., 2014, vol. 16, pp. 19122–9.10.1039/C4CP02089H ↗
25. R.D.K. Misra, D. Depan, V.S.A. Challa, and J.S. Shah: Phys. Chem. Chem. Phys., 2013, vol. 15, pp. 12988–97.10.1039/c3cp51236c ↗
26. D. Depan and R.D.K. Misra: Nanoscale, 2012, vol. 4, pp. 6325–35.10.1039/c2nr31345f ↗
27. R.D.K. Misra and P. Chaudhari: J. Biomed. Mater. Res. A, 2013, vol. 101A, pp. 1059–68.10.1002/jbm.a.34409 ↗
28. R.D.K. Misra and P. Chaudhari: J. Biomed. Mater. Res. A, 2013, vol. 101, pp. 528–536.10.1002/jbm.a.34351 ↗
29. Q. Yuan, Q. Bao, and R.D.K. Misra: Mater. Technol., 2012, vol. 27, pp.289–94.10.1179/1753555712Y.0000000016 ↗
30. R.D.K. Misra, D. Depan, and H. Narsale: Chem. Phys., 2012, vol. 213, pp. 1321–1329.
31. Z. Jia, F. Feng, Q. Yuan, and R.D.K. Misra: Mater. Sci. Eng. B, 2012, vol. 177, pp. 666–72.10.1016/j.mseb.2012.03.042 ↗
32. C. Lei, G.Y. Zhang, Q.S. Zhu, and Z.H. Xie: Powder Technol., 2016, vol. 296, pp. 79–86.10.1016/j.powtec.2015.12.024 ↗
33. S.F. Li, C. Tan, Y. Liu, P.P. Lv, Q.S. Zhu, Y. Shi, and Y.F. Yang: Materialia, 2018, vol. 2, pp. 68–72.10.1016/j.mtla.2018.06.010 ↗
34. L. Zhang, F.X. Xin, Z. Du, M.Q. Xiang, Y.F. Yang, Q.S. Zhu, and Y. Shi: J. Am. Ceram. Soc., 2019, vol. 102, pp. 1599–607.10.1111/jace.16076 ↗
35. L. Zhang, F.X. Xin, S.F. Li, Y.F. Yang, Q.S. Zhu, and G. Wang: J. Am. Ceram. Soc., 2019, vol. 102, pp. 4492–501.10.1111/jace.16362 ↗
36. S.M. George: Chem. Rev., 2010, vol. 110, pp. 111–31.10.1021/cr900056b ↗
37. Y. Yan, J. Miao, Z. Yang, F.X. Xiao, H.B. Yang, B. Liu, and Y.H. Yang: Chem. Soc. Rev., 2015, vol. 44, pp. 3295–346.10.1039/C4CS00492B ↗
38. K.S. Munir, D.T. Oldfield, and C. Wen: Adv. Eng. Mater., 2016, vol. 18, pp. 294–303.10.1002/adem.201500346 ↗
39. K.S. Munir, Y. Zheng, D. Zhang, J. Lin, Y. Li, and C. Wen: Mater. Sci. Eng. A, 2017, vol. 696, pp. 10–25.10.1016/j.msea.2017.04.026 ↗
40. K. Vasanthakumar, N.S. Karthiselva, N.M. Chawake, and S.R. Bakshi: J. Alloy. Compd., 2017, vol. 709, pp. 829–41.10.1016/j.jallcom.2017.03.216 ↗
41. A.O. Adegbenjoa, P.A. Olubambia, J.H. Potgieter, M.B. Shongwe, and M. Ramakokovhu: Mater. Des., 2017, vol. 128, pp. 119–29.10.1016/j.matdes.2017.05.003 ↗
42. K.S. Munir, Y.F. Zheng, D.L. Zhang, J.X. Lin, Y.C. Li, and C. Wen: Mater. Sci. Eng. A, 2017, vol. 688, pp. 505–23.10.1016/j.msea.2017.02.019 ↗
43. F. Xue, J.H. Sui, F. Yan, and C. Wei: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1586–9.10.1016/j.msea.2009.12.003 ↗
44. F.M. Zhang and T.F. Liu, Compos. Part B Eng., 2019, vol. 165, pp. 143–54.10.1016/j.compositesb.2018.11.110 ↗