Compressive and Corrosion Properties of Lotus-Type Porous Mg-Mn Alloys Fabricated by Unidirectional Solidification
Source abstract
Abstract
Lotus-type porous Mg-Mn alloys were fabricated by solid-gas eutectic unidirectional solidification (the Gasar process) by controlling and optimizing the process parameters. The microstructures, compressive properties and corrosion properties in a simulated body fluid solution were investigated. Porous pure Mg was prepared with a preferentially oriented (11$$ \bar{2} $$2) plane, whereas the Mg-2 wt pct Mn alloy showed a preferentially oriented (10$$ \bar{1} $$3) plane. Mn addition refined the grains, improved the Mn precipitates, activated the {10$$ \bar{1} $$2} twin at the end of the pores and increased the compressive strength from 64 MPa for pure Mg to 74 MPa for 1 wt pctMn and 80 MPa for 2 wt pct Mn. Electrochemical tests showed that 2 wt pct Mn addition could decrease the corrosion current from 1.84 × 10−3 to 4.22 × 10−4 A cm−2. Immersion tests suggest that 2 wt pct Mn addition reduced the sample mass loss, which indicated a better corrosion performance, and exhibited a smaller decrease in compressive strength compared with that of the porous pure Mg. This work shows that the Gasar technique can be a promising fabrication method to prepare lotus-type porous Mg-Mn alloys which are more attractive for application in degradable biomaterials engineering.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. T.C. Xu, Y. Yang, X.D. Peng, J.F. Song, F.S. Pan: J. Magnes. Alloy., 2019, vol. 7, pp. 536-554. https://doi.org/10.1016/j.jma.2019.08.00110.1016/j.jma.2019.08.001 ↗
2. J. Liu, Z.S. Cui: J. Mater. Process. Technol., 2009, vol. 209, pp. 5871-5880. https://doi.org/10.1016/j.jmatprotec.2009.06.01510.1016/j.jmatprotec.2009.06.015 ↗
3. A.A. Luo: J. Magnes. Alloy., 2013, vol. 1, pp. 2-22. https://doi.org/10.1016/j.jma.2013.02.00210.1016/j.jma.2013.02.002 ↗
4. E.Karakulak: J. Magnes. Alloy., 2019, vol. 7, pp. 355-369. https://doi.org/10.1016/j.jma.2019.05.00110.1016/j.jma.2019.05.001 ↗
5. X.N. Gu, Y.F. Zheng: Front. Mater. Sci. China, 2010 vol. 4, pp. 111–115. https://doi.org/10.1007/s11706-010-0024-110.1007/s11706-010-0024-1 ↗
6. F.Wittea, J. Fischera, J. Nellesenb, H.A. Crostackb, V. Kaesec,A. Pischd, F. Beckmanne, H. Windhagena: Biomaterials, 2006, vol. 27, pp. 1013-1018. https://doi.org/10.1016/j.biomaterials.2005.07.03710.1016/j.biomaterials.2005.07.037 ↗
7. N.E.L. Saris, E. Mervaala, H. Karppanen, J.A.Khawaja, A.Lewenstam: Clin. Chim. Acta, 2000, vol. 294, pp. 1-26. https://doi.org/10.1016/S0009-8981(99)00258-210.1016/S0009-8981(99)00258-2 ↗
8. M. P. Staiger, A.M. Pietak, J. Huadmai, G.Dias: Biomaterials, 2006, vol. 27, pp. 1728-1734. https://doi.org/10.1016/j.biomaterials.2005.10.00310.1016/j.biomaterials.2005.10.003 ↗
9. A. Vahid, P. Hodgson, Y.C. Li: J. Alloy. Compd., 2017, vol. 724, pp. 176-186. https://doi.org/10.1016/j.jallcom.2017.07.00410.1016/j.jallcom.2017.07.004 ↗
10. R. D. Carpenter, B. S. Klosterhoff, F. B. Torstrick, K.T. Foley, J.K. Burkus, C.S.D. Lee, K.Gall, R.E.Guldberg, D.L. Safranski: J. Mech. Behav. Biomed., 2018, vol. 80, pp. 68-76. doi: 10.1016/j.jmbbm.2018.01.01710.1016/j.jmbbm.2018.01.017 ↗
11. B.R. Levine, S. Sporer, R.A. Poggie, C.J. DellaValle and J.J. Jacob: Biomaterials, 2006, vol. 27, pp. 4671-4681. doi:10.1016/j.biomaterials.2006.04.041.10.1016/j.biomaterials.2006.04.041 ↗
12. G.Z. Jia, Y. Hou, C.X. Chen, J.L. Niu, H. Zhang, M.P. Xiong, G.Y. Yuan: Mater. Des. 2018, vol. 140, pp. 106-13. doi: 10.1016/j.matdes.2017.11.064.10.1016/j.matdes.2017.11.064 ↗
13. Q.L. Loh, C. Choong :Tissue Eng. Part B 2013, vol. 19, pp. 485-502. https://doi.org/10.1089/ten.teb.2012.043710.1089/ten.teb.2012.0437 ↗
14. H. Seki, M. Tane, M. Otsuka and H. Nakajima: J. Mater. Res., 2007, vol. 22, pp. 1331-1338. https://doi.org/10.1557/JMR.2007.016410.1557/JMR.2007.0164 ↗
15. M.H. Kang, H. Lee, T.S. Jang, Y.J. Seong, H.E. Kim, Y.H. Koh, J. Song, H.D. Jung: Acta Biomaterialia, 2019, vol. 84, pp. 453-467. https://doi.org/10.1016/j.actbio.2018.11.04510.1016/j.actbio.2018.11.045 ↗
16. V.I. Shapovalov: U.S. Patent, No. 5181549. January 26, 1993.
17. H.W Zhang, Y.X. Li, and Y. Liu: Acta. Metall. Sin., 2007, vol. 43, pp. 113-118.
18. Y. Liu, Y.X. Li, R.F. Liu,R. Zhou, Y.H. Jiang, Z.H. Li: Acta. Metall. Sin. 2010, vol.46, pp.129-134. https://doi.org/10.3724/SP.J.1037.2009.0052710.3724/SP.J.1037.2009.00527 ↗
19. Y. Liu, Y.X. Li, Y.X, H.W. Zhang, J. Wan: Rare Metal Mater. Eng., 2005, vol. 34, pp. 1128-1130.
20. G.R. Jiang, Y.X. Li and Y. Liu: Trans. Nonferrous Met. Soc. China, 2011, vol. 21, pp. 88-95. https://doi.org/10.1016/S1003-6326(11)60682-110.1016/S1003-6326(11)60682-1 ↗
21. Y. Liu, Y.X. Li, J. Wan, H.W. Zhang: Mater. Sci. Eng. A, 2005, vol. 402, pp. 47-54. doi: 10.1016/j.msea.2005.03.10710.1016/j.msea.2005.03.107 ↗
22. L.T. Chen, H.W Zhang, Y. Liu, Y.X. Li. Acta. Metall. Sin., 2012, vol. 48: 323-333. https://doi.org/10.3724/SP.J.1037.2011.0070310.3724/SP.J.1037.2011.00703 ↗
23. S.K. Hyun, M. Uchikoshi, K. Mimura, M. Isshiki, H. Nakajima: Mater. Trans., 2010, vol. 51, pp. 2076-2079. https://doi.org/10.2320/matertrans.M201021910.2320/matertrans.M2010219 ↗
24. M. Tane, T. Mayama,A. Odaa, H. Nakajima: Acta Metall., 2015, vol. 84, pp. 80-94. https://doi.org/10.1016/j.actamat.2014.10.02410.1016/j.actamat.2014.10.024 ↗
25. Ashby M F, Evans A G:Metal Foams: A Design Guide, San Diego, Butterworth-Heinemann, 2000: 1
26. K. Alvarez, K. Sato, S.K. Hyun, H. Nakajim: Materials Science and Engineering C, 2008, vol. 28, pp. 44–50. https://doi.org/10.1016/j.msec.2007.01.01010.1016/j.msec.2007.01.010 ↗
27. X.N. Gu, W.R. Zhou, Y.F. Zheng, Y. Liu, Y.X. Li: Mater. Lett., 2010, vol. 64, pp. 1871-1974. https://doi.org/10.1016/j.matlet.2010.06.01510.1016/j.matlet.2010.06.015 ↗
28. H. Hoshiyama, T. Ikeda, H. Nakajima:High Temperature Materials and Processes, 2007, Vol. 26, pp. 303-316. https://doi.org/10.1515/HTMP.2007.26.4.30310.1515/HTMP.2007.26.4.303 ↗
29. C. Park, S. R. Nutt: Mat. Res. Soc. Symp. Proc. 1998, Vol. 521, pp. 315-320. https://doi.org/10.1557/proc-521-31510.1557/proc-521-315 ↗
30. X.N. Gu, Y.F. Zheng, Y. Cheng, S.P. Zhong, T.F. Xi: Biomaterials, 2009, vol. 30, pp. 484-498. https://doi.org/10.1016/j.biomaterials.2008.10.02110.1016/j.biomaterials.2008.10.021 ↗
31. N. Li, Y.F. Zheng: J. Mater. Sci. Technol., 2013, vol. 29, pp. 489-502. https://doi.org/10.1016/j.jmst.2013.02.00510.1016/j.jmst.2013.02.005 ↗
32. Y. He, Y.X. Li, H.W. Zhang, Y. Liu: J. Mater. Process Tech., 2017, vol. 245, pp. 106-114. https://doi.org/10.1016/j.jmatprotec.2017.02.02410.1016/j.jmatprotec.2017.02.024 ↗
33. Kokubo T, Takadama H: Biomaterials, 2006, vol. 27, pp. 2907-2915. https://doi.org/10.1016/j.biomaterials.2006.01.01710.1016/j.biomaterials.2006.01.017 ↗
34. L. Gibson, M. Ashby: Ceellar Solids: Structure and Properties, 2nd ed. Cambridge University Press, Cambridge, 1997.10.1017/CBO9781139878326 ↗
35. N. Huber,R.N. Viswanath,N. Mameka, J.Markmann, J.Weißmüller: Acta Materialia, 2014, vol. 67 pp. 252-265. https://doi.org/10.1016/j.actamat.2013.12.00310.1016/j.actamat.2013.12.003 ↗
36. E. W. Kelley, W.F. Hosford: Trans. Met. Soc. AIME, 1968, vol. 242, pp. 5-13.
37. S.V.S.N. Murty, N. Nayan, R. Madhavan, S.C. Sharma, K.M. George, S. Suwas: J. Mater. Eng. Perform., 2015, vol. 24, pp. 2091-2098. https://doi.org/10.1007/s11665-015-1459-410.1007/s11665-015-1459-4 ↗
38. Y.F. Luo, Y.L. Deng, L. Guan, L. Ye, X.B. Guo, A. Luo: Corrosion Science, 2020, vol. 164, 108338 doi: 10.1016/j.corsci.2019.10833810.1016/j.corsci.2019.108338 ↗
39. P. Metalnikov, G.B. Hamu, Y. Templeman, K.S. Shin, L. Meshi: Materials Characterization, 2018, vol. 145, pp. 101-115. https://doi.org/10.1016/j.matchar.2018.08.03310.1016/j.matchar.2018.08.033 ↗
40. K.D. Ralston, N. Birbilis: Corrosion, 2010, vol. 66 (7): 075005. doi:10.5006/1.346291210.5006/1.3462912 ↗
41. G.R. Argade, S.K. Panigrahi, R.S. Mishra: Corrosion Science, 2012, vol. 58, pp. 145-151. https://doi.org/10.1016/j.corsci.2012.01.02110.1016/j.corsci.2012.01.021 ↗
42. D.S. Gandel, M.A. Easton, M.A. Gibson, N. Birbilis: Corrosion, 2013, vol. 69, pp. 744-751. http://dx.doi.org/10.5006/082710.5006/0827 ↗
43. L.P. Xu, E.L, Zhang, D.S. Yin, S.Y. Zeng, K. Yang: J. Mater. Sci. 2008, 19(3):1017-1025. doi: 10.1007/s10856-007-3219-y10.1007/s10856-007-3219-y ↗
44. G.L. Song, R. Mishra, Z.Q. Xu: Electrochem. Commun. 2010, vol. 12, pp. 1009-1012. https://doi.org/10.1016/j.elecom.2010.05.01110.1016/j.elecom.2010.05.011 ↗
45. H.M. Jia, X.H. Feng, Y.S. Yang: J. Mater. Sci. Technol., 2018, vol.34, pp .1229-1235. https://doi.org/10.1016/j.jmst.2017.06.00910.1016/j.jmst.2017.06.009 ↗
46. K. Hagihara, M. Okubo, M. Yamasaki, T. Nakano: Corros. Sci., 2016, vol. 109, pp. 68-85. https://doi.org/10.1016/j.corsci.2016.03.01910.1016/j.corsci.2016.03.019 ↗
47. B.Q. Fu, W. Liu, Z.L. Li: Appl. Surf. Sci., 2009, vol. 255, pp. 9348-9357. https://doi.org/10.1016/j.apsusc.2009.07.03410.1016/j.apsusc.2009.07.034 ↗