journal article·2020-05

Orientation Dependence of Deformation-Induced Martensite Transformation During Uniaxial Tensile Deformation of Carbide-Free Bainitic Steel

Sk. Md. Hasan, Abhijit Ghosh, Debalay Chakrabarti, Shiv Brat Singh

Publisher page

Abstract

The present study investigates the orientation dependence of deformation-induced martensite (DIM) transformation in carbide-free bainitic steel using experimental macrotexture analysis and crystal plasticity-based modelling. The results indicate that the P {110}〈122〉 component of retained austenite preferentially undergoes DIM transformation during uniaxial tensile deformation at room temperature. It is also found that the P component of retained austenite possesses the lowest Schmid factor value compared with other possible texture components. The lowest Schmid factor value of the P component results in the highest resolved shear stress value for its slipping. As a result, during plastic deformation when most of the initial components of the retained austenite reorient themselves to other relatively stable orientations, the P component remains almost unaffected. Accumulation of stress concentration thus increases along this component, which eventually leads to its deformation-induced transformation to martensite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. F.G. Caballero and H.K.D.H. Bhadeshia: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 251–7.10.1016/j.cossms.2004.09.005 ↗
2. J. Pacyna, P. Bala, S. Dobosz, A. Kokosza, and S. Kac: J. Achiev. Mater. Manuf. Eng., 2010, vol. 39, pp. 19–26.
3. F.G. Caballero, S. Allain, J. Cornide, J.D. PuertaVelásquez, C. Garcia-Mateo, and M.K. Miller: Mater. Des., 2013, vol. 49, pp. 667–80.10.1016/j.matdes.2013.02.046 ↗
4. S. Das, S. Sinha, A. Lodh, A.R. Chintha, M. Krugla, and A. Haldar: Mater. Sci. Technol. (United Kingdom), 2017, vol. 33, pp. 1026–37.10.1080/02670836.2016.1268663 ↗
5. S.M. Hasan, M. Ghosh, D. Chakrabarti, and S.B. Singh: Mater. Sci. Eng. A, 2020, vol. 771, p. 138590.10.1016/j.msea.2019.138590 ↗
6. H.K.D.H. Bhadeshia: Bainite in Steels: Transformation, Microstructure and Properties, second edi., The Institute of Materials, London, 2001.
7. C. Garcia-Mateo, F.G. Caballero, J. Chao, C. Capdevila, and C. Garcia De Andres: J. Mater. Sci., 2009, vol. 44, pp. 4617–24.10.1007/s10853-009-3704-4 ↗
8. A. Barbacki: J. Mater. Process. Tech., 1995, vol. 53, pp. 57–63.10.1016/0924-0136(95)01961-D ↗
9. S. Das and A. Haldar: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 1844–54.10.1007/s11661-013-2173-1 ↗
10. B.P.J. Sandvik and H.P. Nevalainen: Met. Technol., 1981, vol. 15, pp. 213–20.10.1179/030716981803275992 ↗
11. Y. Wang, K. Zhang, Z. Guo, N. Chen, and Y. Rong: Mater. Sci. Eng. A, 2012, vol. 552, pp. 288–94.10.1016/j.msea.2012.05.042 ↗
12. M.R. Berrahmoune, S. Berveiller, K. Inal, A. Moulin, and E. Patoor: Mater. Sci. Eng. A, 2004, vol. 378, pp. 304–7.10.1016/j.msea.2003.10.372 ↗
13. S.M. Hasan, D. Chakrabarti, and S.B. Singh: Wear, 2018, vol. 408–409, pp. 151–9.10.1016/j.wear.2018.05.006 ↗
14. B.C. De Cooman: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 285–303.10.1016/j.cossms.2004.10.002 ↗
15. G.K. Tirumalasetty, M.A. Van Huis, C. Kwakernaak, J. Sietsma, W.G. Sloof, and H.W. Zandbergen: Acta Mater., 2012, vol. 60, pp. 1311–21.10.1016/j.actamat.2011.11.026 ↗
16. K. Sugimoto, T. Iida, J. Sakaguchi, and T. Kashima: ISIJ Int., 2000, vol. 40, pp. 902–8.10.2355/isijinternational.40.902 ↗
17. R. Petrov, L. Kestens, A. Wasilkowska, and Y. Houbaert: Mater. Sci. Eng. A, 2007, vol. 447, pp. 285–97.10.1016/j.msea.2006.10.023 ↗
18. K.A. Johnson and C.M. Wayman: Acta Crystallogr., 1963, vol. 16, pp. 480–5.10.1107/S0365110X63001328 ↗
19. J.R. Patel and M. Cohen: Acta Metall., 1953, vol. 1, pp. 531–8.10.1016/0001-6160(53)90083-2 ↗
20. G. Kurdjumov and G. Sachs: Zeitschrift für Phys., 1930, vol. 64, pp. 325–43.10.1007/BF01397346 ↗
21. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–99.10.1016/S1359-6454(02)00577-3 ↗
22. N. Gey, B. Petit, and M. Humbert: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3291–9.10.1007/s11661-005-0003-9 ↗
23. J.C. Bokros and E.R. Parker: Acta Metall., 1963, vol. 11, pp. 1291–301.10.1016/0001-6160(63)90024-5 ↗
24. S. Kundu, A.K. Verma, and V. Sharma: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 2552–65.10.1007/s11661-011-0971-x ↗
25. S. Chatterjee and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2007, vol. 23, pp. 1101–4.10.1179/174328407X226536 ↗
26. G.B. Olson and M. Cohen: Metall. Trans. A, 1982, vol. 13A, pp. 1907–14.10.1007/BF02645934 ↗
27. H.K.D.H. Bhadeshia, S.A. David, J.M. Vitek, and R.W. Reed: Mater. Sci. Technol., 1991, vol. 7, pp. 686–98.10.1179/mst.1991.7.8.686 ↗
28. A. Matsuzaki, H.K.D.H. Bhadeshia, and H. Harada: Acta Metall. Mater., 1994, vol. 42, pp. 1081–90.10.1016/0956-7151(94)90125-2 ↗
29. E. Jimenez-Melero, N.H. van Dijk, L. Zhao, J. Sietsma, J.P. Wright, and S. van der Zwaag: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6407–16.10.1016/j.msea.2011.04.087 ↗
30. R. Blondé, E. Jimenez-Melero, L. Zhao, J.P. Wright, E. Brück, S. van der Zwaag, and N.H. van Dijk: Mater. Sci. Eng. A, 2014, vol. 618, pp. 280–7.10.1016/j.msea.2014.09.008 ↗
31. B.L. Ennis, E. Jimenez-Melero, E.H. Atzema, M. Krugla, M.A. Azeem, D. Rowley, D. Daisenberger, D.N. Hanlon, and P.D. Lee: Int. J. Plast., 2017, vol. 88, pp. 126–39.10.1016/j.ijplas.2016.10.005 ↗
32. E.C. Oliver, P.J. Withers, M.R. Daymond, S. Ueta, and T. Mori: Appl. Phys. A Mater. Sci. Process., 2002, vol. 74, pp. S1143–5.10.1007/s003390201555 ↗
33. T.K. Shan, S.H. Li, W.G. Zhang, and Z.G. Xu: Mater. Des., 2008, vol. 29, pp. 1810–6.10.1016/j.matdes.2008.03.023 ↗
34. Y. Tomota, H. Tokuda, Y. Adachi, M. Wakita, N. Minakawa, A. Moriai, and Y. Morii: Acta Mater., 2004, vol. 52, pp. 5737–45.10.1016/j.actamat.2004.08.016 ↗
35. S.S. Babu, S. Vogel, C. Garcia-Mateo, B. Clausen, L. Morales-Rivas, and F.G. Caballero: Scr. Mater., 2013, vol. 69, pp. 777–80.10.1016/j.scriptamat.2013.08.026 ↗
36. L. Morales-Rivas, F. Archie, S. Zaefferer, M. Benito-Alfonso, S.P. Tsai, J.R. Yang, D. Raabe, C. Garcia-Mateo, and F.G. Caballero: J. Alloys Compd., 2018, vol. 752, pp. 505–19.10.1016/j.jallcom.2018.04.189 ↗
37. A. Kisko, R.D.K. Misra, J. Talonen, and L.P. Karjalainen: Mater. Sci. Eng. A, 2013, vol. 578, pp. 408–16.10.1016/j.msea.2013.04.107 ↗
38. E.I. Galindo-Nava and P.E.J. Rivera-Díaz-del-Castillo: Acta Mater., 2017, vol. 128, pp. 120–34.10.1016/j.actamat.2017.02.004 ↗
39. B.D. Cullity: Elements of X-Ray Diffraction, Second Edi., Addision-Wesley Publishing Company, Inc, 1978.
40. R.J. Hill and C.J. Howard: J. Appl. Crystallogr., 1987, vol. 20, pp. 467–74.10.1107/S0021889887086199 ↗
41. D.J. Dyson and B. Holmes: J. Iron Steel Inst., 1970, vol. 208, pp. 469–74.
42. A. Kumar, S.B. Singh, and K.K. Ray: Mater. Sci. Eng. A, 2008, vol. 474, pp. 270–82.10.1016/j.msea.2007.05.007 ↗
43. T.S. Byun, E.H. Lee, and J.D. Hunn: J. Nucl. Mater., 2003, vol. 321, pp. 29–39.10.1016/S0022-3115(03)00195-8 ↗
44. S. Curtze and V.T. Kuokkala: Acta Mater., 2010, vol. 58, pp. 5129–41.10.1016/j.actamat.2010.05.049 ↗
45. H. Gholizadeh: University of Leoben, 2013.
46. R.K. Ray, P. Chapellier, and J.J. Jonas: Textures Microstruct., 1990, vol. 12, pp. 141–53.10.1155/TSM.12.141 ↗
47. R.P. Reed and R.E. Schramm: J. Appl. Phys., 1974, vol. 45, pp. 4705–11.10.1063/1.1663122 ↗
48. R.E. Schramm and R.P. Reed: Metall. Trans. A, 1975, vol. 6A, pp. 1345–51.10.1007/BF02641927 ↗
49. M.F. de Campos, S.A. Loureiro, D. Rodrigues, M.C.A. da Silva, and N.B. de Lima: in Sixth International Latin-American Conference on Powder Technology, Rio de Janeiro, Brazil, 2007, pp. 1–5.
50. O. Engler: J. Appl. Crystallogr., 2009, vol. 42, pp. 1147–57.10.1107/S0021889809041685 ↗
51. R.K. Ray and J.J. Jonas: Int. Mater. Rev., 1990, vol. 35, pp. 1–36.10.1179/095066090790324046 ↗
52. J.D. Eshelby: Math. Phys. Eng. Sci., 1957, vol. 241, pp. 376–96.
53. R.A. Lebensohn and C.N. Tomé: Acta Metall. Mater., 1993, vol. 41, pp. 2611–24.10.1016/0956-7151(93)90130-K ↗
54. G.P. Kang, K. Lee, Y.H. Kim, S.J. Park, and K.S. Shin: Met. Mater. Int., 2017, vol. 23, pp. 930–39.10.1007/s12540-017-6877-4 ↗
55. D. Raabe, F. Roters, F. Barlat, and L.-Q. Chen, eds.: Continuum Scale Simulation of Engineering Materials: Fundamentals – Microstructures – Process Applications, Wiley-VCH, Berlin, 2004.
56. G.E. Dieter: Mechanical Metallurgy, SI metric., McGraw-Hil Book Company, London, 2007.
57. S. Takajo, C.N. Tomé, S.C. Vogel, and I.J. Beyerlein: Int. J. Plast., 2018, vol. 109, pp. 137–52.10.1016/j.ijplas.2018.06.001 ↗
58. J. Jung, J.I. Yoon, D.N. Lee, and H.S. Kim: Acta Mater., 2017, vol. 131, pp. 363–72.10.1016/j.actamat.2017.04.020 ↗
59. C. Tome, G.R. Canova, U.F. Kocks, N. Christodoulou, and J.J. Jonas: Acta Metall., 1984, vol. 32, pp. 1637–53.10.1016/0001-6160(84)90222-0 ↗
60. B. Bal: Int. J. Steel Struct., 2018, vol. 18, pp. 13–23.10.1007/s13296-018-0302-9 ↗
61. B.A. Mohammed: Michigan State University, 2017.
62. S.M. Hasan, A. Mandal, S.B. Singh, and D. Chakrabarti: Mater. Sci. Eng. A, 2019, vol. 751, pp. 142–53.10.1016/j.msea.2019.02.062 ↗
63. E. Schmid: Zeitschrift Für Elektrochemie, 1931, vol. 37, p. 447.
64. I. Tamura: Met. Sci., 1982, vol. 16, pp. 245–53.10.1179/030634582790427316 ↗
65. J.W. Christian: Metall. Trans. A, 1982, vol. 13A, pp. 509–38.10.1007/BF02644415 ↗