journal article·2020-05

Realization of Selective Strengthening of Ferrite by Nb/V Microalloying in a Medium Carbon Lightweight δ-TRIP Steel

Lan Ye, Junfeng Wang, Zhaoli Zeng, Wandong Wang, Shuangxi Song, Kolan Madhav Reddy, Li Wang, Xiaodong Wang

Publisher page

Abstract

The effect of niobium (Nb) and vanadium (V) microalloying on the mechanical properties and microstructure evolution of medium carbon lightweight δ-TRIP steel was investigated. The results indicate that the pristine and microalloyed δ-TRIP steels comprise mainly delta ferrite, bainite, alpha ferrite and retained austenite. With the addition of trace Nb/V elements to δ-TRIP steel, the volume fraction of retained austenite increased and high-density nano-scale Nb/V carbides precipitated as well, for which substantial tensile strength (1028 MPa) and elongation (26.7 pct) were observed. Extensive characterization revealed that the strength-ductility tradeoff in microalloyed δ-TRIP steel was overcome because of the presence of transformation-induced plasticity effect and pinning of dislocations by nano-sized Nb/V carbides in a ferrite matrix, which enhanced the capacity of ferrite grains to accommodate higher density dislocations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. D. M. Revitt, L.Lundy, F.Coulon and M. Fairley: J. Environ. Manag., 2014, vol. 146, pp. 552-67.10.1016/j.jenvman.2014.05.041 ↗
2. S. Han, S. Shin, H.-J. Lee, B.-J. Lee, S. Lee, N. Kim and J. H. Kwak: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 843-53.10.1007/s11661-011-0942-2 ↗
3. Y.L. Kang: Iron Steel, 2008, vol. 43, pp. 1-7.
4. Y. Zhang, X.M. Lai, P. Zhu and W.R. Wang: Mater. Des., 2006, vol. 27, pp. 64-8.10.1016/j.matdes.2004.09.010 ↗
5. D.H. Bae, W.S. Jung and J.B. Heo: Key Eng. Mater., 2005, vol. 297-300, pp. 2883-7.10.4028/www.scientific.net/KEM.297-300.2883 ↗
6. S.J. Park, B. Hwang, K.H. Lee, T.H. Lee, D.W. Suh and H.N.Han: Scr. Mater., 2013, vol. 68, pp. 365-9.10.1016/j.scriptamat.2012.09.030 ↗
7. W.J. Oh and C.M. Lee: Int. J. Precis. Eng. Man., 2018, vol. 19, pp 299-302.10.1007/s12541-018-0036-9 ↗
8. S. Oliver, T. B. Jones and G. Fourlaris: J. Mate. Sci. Technol., 2007, vol. 23, pp. 423-31.10.1179/174328407X168937 ↗
9. X.D. Wang, B.X. Huang, L. Wang and Y.H. Rong: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1-7.10.1007/s11661-007-9366-4 ↗
10. E. Girault, P. Jacques, P.H. Harlet, K. Mols, J. Van Humbeeck, E. Aernoudt and F. Delannay: Mater. Charact., 1998, vol. 40, pp. 111-8.10.1016/S1044-5803(97)00154-X ↗
11. S. Chatterjee, M. Murugananth, H. Bhadeshia (2013) Mater. Sci. Technol., vol. 23(7), pp. 819-27.10.1179/174328407X179746 ↗
12. H.L. Yi, K.Y. Lee and H.K.D.H. Bhadeshia: Proc R. Soc A, 2010, vol. 467, pp.234-43.10.1098/rspa.2010.0127 ↗
13. J.F. Wang, Q. Yang, X.D. Wang and L. Wang: Metall. Mater. Trans. A, 2016, vol. 47A(12), pp. 5918-31.10.1007/s11661-016-3752-8 ↗
14. H.L. Yi, K.Y. Lee, J.H. Lim, H.K.D.H. Bhadeshia and D.W. Suh: Sci. Technol. Weld. Join., 2013, vol. 15(7), pp. 619-24.10.1179/136217110X12813393169778 ↗
15. G. Frommeyer, E. Drewes and B. Engel: Revue de Me’tallurgie, 2002, vol. 97, pp. 1245-53.10.1051/metal:2000110 ↗
16. S. Pramanik and S. Suwas: JOM, 2014, vol. 66, pp. 1868-76.10.1007/s11837-014-1129-2 ↗
17. S.P. Chen, R. Rana, A. Haldar and R. K. Ray: Prog. Mater. Sci., 2017, vol. 89, pp. 345-91.10.1016/j.pmatsci.2017.05.002 ↗
18. H.J. Pan, H. Ding and M.H. Cai: Mater. Sci. Eng. A, 2018, vol. 736, pp. 375-82.10.1016/j.msea.2018.08.055 ↗
19. A. E. Salas-Reyes, I. Mejía, A. B. Jacuinde, A. Boulaajaj, J. Calvob and J. M. Cabrera: Mater. Sci. Eng. A, 2014, vol. 611, pp. 77-89.10.1016/j.msea.2014.05.072 ↗
20. V. G. García, I. Mejía, and F. R. Calderón: Mater. Charact., 2019, vol. 147, pp. 1-10.10.1016/j.matchar.2018.10.012 ↗
21. B. Jiang, W. Fang, R.M. Chen, D.Y. Guo and Y.Z. Liu: Mater. Sci. Eng. A, 2019, vol. 748, pp. 180-8.10.1016/j.msea.2019.01.094 ↗
22. H. Kong, Q. Chao, M. H. Cai, E. J. Pavlina, B. Rolfe, P. D. Hodgson and H. Beladi: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 1509-19.10.1007/s11661-018-4525-3 ↗
23. K.E. Thelning: Steel and Its Heat Treatment, 2nd ed., Boston: Butterworths, 1984, pp. 90-143.10.1016/B978-0-408-01424-3.50007-8 ↗
24. Z.G. Wang, W. Zhou, L.M. Fu, J.F. Wang, R.C. Luo, X.C. Han, B. Chen and X.D. Wang: Mater. Sci. Eng. A, 2017, vol. 696, pp. 503-10.10.1016/j.msea.2017.04.111 ↗