journal article·2020-04

Understanding the Role of Multi-scale Reinforcements on Severe Plastic Deformation of Titanium Matrix Composites

Jianwen Le, Yuanfei Han, Juan Xiang, Liming Lei, Guangfa Huang, Weijie Lu

Publisher page

Abstract

Titanium matrix composites (TMCs) reinforced with different TiBw and La2O3p content were successfully processed by equal channel angular pressing (ECAP), and the role of reinforcements on the microstructure and mechanical properties were investigated. The results show that the addition of reinforcements accelerates continuous dynamic recrystallization (CDRX) and promotes the formation of new ultrafine grains (200 to 500 nm) in ECAPed TMCs. Micron-scale TiBw accelerates recrystallization by particle-stimulated nucleation and the increasing effective strain. CDRX occurs more easily near TiBw tips due to the load-bearing effect. By contrast, nano-scaled La2O3p retards the migration of grain boundaries through Zener drag effect and promotes the evolution of CDRX. The strength of ECAPed TMCs is improved significantly and reinforcements enhance the contribution of grain-refinement strengthening. The TMCs with 1.2 vol pct reinforcements exhibited the largest improvement in total strength, which is 5 times and 3 times of those with 0 vol pct and 2.4 vol pct, respectively. The elongations of both forged and ECAPed TMCs decrease with increasing reinforcement content owing to TiB whisker fracture and interface debonding and the diminishing strain hardening capacity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Shaolou Wei, Lujun Huang, Xinting Li, Yang Jiao, Wei Ren and Lin Geng: Metall. Mater. Trans. A, 2019, vol. 50, pp. 3629-3645.10.1007/s11661-019-05244-7 ↗
2. X. Guo, L. Wang, M. Wang, J. Qin, D. Zhang and W. Lu: Acta Mater., 2012, vol. 60, pp. 2656-2667.10.1016/j.actamat.2012.01.032 ↗
3. W. Chen, C. J. Boehlert, J. Y. Howe and E. A. Payzant: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3046-3061.10.1007/s11661-011-0618-y ↗
4. Ke Geng, Weijie Lu and Di Zhang: Mater. Sci. Eng., A, 2003, vol. 360, pp. 176-182.10.1016/S0921-5093(03)00437-4 ↗
5. R. W. Bush and C. A. Brice: Mater. Sci. Eng., A, 2012, vol. 554, pp. 12-21.10.1016/j.msea.2012.05.083 ↗
6. R. A. Gaisin, V. M. Imayev and R. M. Imayev: J. Alloys Compd., 2017, vol. 723, pp. 385-394.10.1016/j.jallcom.2017.06.287 ↗
7. L. J. Huang, L. Geng, B. Wang, H. Y. Xu and B. Kaveendran: Composites Part A, 2012, vol. 43, pp. 486-491.10.1016/j.compositesa.2011.11.014 ↗
8. Fan Liu, Hao Yuan, Jian Yin and Jing Tao Wang: Mater. Sci. Eng., A, 2016, vol. 662, pp. 578-587.10.1016/j.msea.2016.03.022 ↗
9. Miao Song, Cheng Sun, Youxing Chen, Zhongxia Shang, Jin Li, Zhe Fan, Karl T. Hartwig and Xinghang Zhang: International Journal of Pressure Vessels and Piping, 2019, vol. 172, pp. 212-219.10.1016/j.ijpvp.2019.03.025 ↗
10. Y. J. Chen, Y. J. Li, J. C. Walmsley, S. Dumoulin and H. J. Roven: Metall. Mater. Trans. A, 2009, vol. 41, pp. 787-794.10.1007/s11661-009-0040-x ↗
11. Xicheng Zhao, Wenjie Fu, Xirong Yang and Terence G. Langdon: Scripta Mater., 2008, vol. 59, pp. 542-545.10.1016/j.scriptamat.2008.05.001 ↗
12. I. Kim, J. Kim, D. H. Shin, C. S. Lee and S. K. Hwang: Mater. Sci. Eng., A, 2003, vol. 342, pp. 302-310.10.1016/S0921-5093(02)00318-0 ↗
13. Inyoung Kim, Won-Sik Jeong, Jongryoul Kim, Kyung-Tae Park and Dong Hyuk Shin: Scripta Mater., 2001, vol. 45, pp. 575-580.10.1016/S1359-6462(01)01065-X ↗
14. G. Ramu and Ranjit Bauri: Mater. Des., 2009, vol. 30, pp. 3554-3559.10.1016/j.matdes.2009.03.001 ↗
15. I. Sabirov, O. Kolednik, R. Z. Valiev and R. Pippan: Acta Mater., 2005, vol. 53, pp. 4919-4930.10.1016/j.actamat.2005.07.010 ↗
16. G. S. Wang, G. H. Fan, L. Geng, W. Hu and Y. D. Huang: Mater. Sci. Eng., A, 2013, vol. 571, pp. 144-149.10.1016/j.msea.2013.02.019 ↗
17. Yuanfei Han, Jiuxiao Li, Guangfa Huang, Yuting Lv, Xi Shao, Weijie Lu and Di Zhang: Mater. Des., 2015, vol. 75, pp. 113-119.10.1016/j.matdes.2015.03.018 ↗
18. Liqiang Wang, Xueting Wang, Lai-Chang Zhang and Weijie Lu: Mater. Sci. Eng., A, 2015, vol. 645, pp. 99-108.10.1016/j.msea.2015.08.011 ↗
19. Juan Xiang, Yuanfei Han, Jiuxiao Li, Peikun Qiu, Xianglong Sun and Weijie Lu: J. Alloys Compd., 2017, vol. 726, pp. 57-66.10.1016/j.jallcom.2017.07.294 ↗
20. Juan Xiang, Yuanfei Han, Jianwen Le, Guangfa Huang, Lv Xiao, Jiayu Liu and Weijie Lu: Mater. Charact., 2018, vol. 146, pp. 149-158.10.1016/j.matchar.2018.10.004 ↗
21. Yuntian Theodore Zhu and Terry C. Lowe: Mater. Sci. Eng., A, 2000, vol. 291, pp. 46-53.10.1016/S0921-5093(00)00978-3 ↗
22. Shibayan Roy and Satyam Suwas: J. Alloys Compd., 2013, vol. 548, pp. 110-125.10.1016/j.jallcom.2012.08.123 ↗
23. V. V. Stolyarov, L. Zeipper, B. Mingler and M. Zehetbauer: Mater. Sci. Eng., A, 2008, vol. 476, pp. 98-105.10.1016/j.msea.2007.04.069 ↗
24. Han Yuanfei, Kuang Wei, Yang Xiaofang, Li Jiuxiao, Huang Guangfa, Lv Weijie and Zhang Di: Rare Metal Materials and Engineering, 2016, vol. 45, pp. 3104-3107.10.1016/S1875-5372(17)30062-0 ↗
25. Guangfa Huang, Yuanfei Han, Xianglong Guo, Di Qiu, Liqiang Wang, Weijie Lu and Di Zhang: Mater. Sci. Eng., A, 2017, vol. 688, pp. 155-163.10.1016/j.msea.2017.02.002 ↗
26. Peikun Qiu, Hong Li, Xianglong Sun, Yuanfei Han, Guangfa Huang, Weijie Lu and Di Zhang: J. Alloys Compd., 2017, vol. 699, pp. 874-881.10.1016/j.jallcom.2016.12.418 ↗
27. W. O. Soboyejo, W. Shen and T. S. Srivatsan: Mech. Mater., 2004, vol. 36, pp. 141-159.10.1016/S0167-6636(03)00036-X ↗
28. Jiheng Wang, Xianglong Guo, Jining Qin, Di Zhang and Weijie Lu: Mater. Sci. Eng., A, 2015, vol. 628, pp. 366-373.10.1016/j.msea.2015.01.067 ↗
29. Chao Cai, Shan He, Lifan Li, Qing Teng, Bo Song, Chunze Yan, Qingsong Wei and Yusheng Shi: Composites Part B, 2019, vol. 164, pp. 546-558.10.1016/j.compositesb.2019.01.080 ↗
30. L. J. Huang, L. Geng and H. X. Peng: Mater. Sci. Eng., A, 2010, vol. 527, pp. 6723-6727.10.1016/j.msea.2010.07.025 ↗
31. L. J. Huang, L. Geng, B. Wang and L. Z. Wu: Mater. Des., 2013, vol. 45, pp. 532-538.10.1016/j.matdes.2012.09.043 ↗
32. I. Sen, S. Tamirisakandala, D. Miracle and U. Ramamurty: Acta Mater., 2007, vol. 55, pp. 4983-4993.10.1016/j.actamat.2007.05.009 ↗
33. K. Huang and R. E. Logé: Mater. Des., 2016, vol. 111, pp. 548-574.10.1016/j.matdes.2016.09.012 ↗
34. S. Tamirisakandala, R. B. Bhat, D. B. Miracle, S. Boddapati, R. Bordia, R. Vanover and V. K. Vasudevan: Scripta Mater., 2005, vol. 53, pp. 217-222.10.1016/j.scriptamat.2005.03.038 ↗
35. Xianglong Sun, Hong Li, Yuanfei Han, Jiuxiao Li, Jianwei Mao and Weijie Lu: J. Alloys Compd., 2018, vol. 732, pp. 524-535.10.1016/j.jallcom.2017.10.245 ↗
36. L. Briottet, J. J. Jonas and F. Montheillet: Acta Mater., 1996, vol. 44, pp. 1665-1672.10.1016/1359-6454(95)00257-X ↗
37. J. D. Robson, D. T. Henry and B. Davis: Acta Mater., 2009, vol. 57, pp. 2739-2747.10.1016/j.actamat.2009.02.032 ↗
38. Y. L. Chen, A. R. Jones, R. C. Pond and U. Miller: Metall. Mater. Trans. A, 2002, vol. 33, pp. 3787-3794.10.1007/s11661-002-0251-x ↗
39. Shehreen S. Dheda and Farghalli A. Mohamed: Mater. Sci. Eng., A, 2011, vol. 528, pp. 8179-8186.10.1016/j.msea.2011.07.032 ↗
40. D. Hill, R. Banerjee, D. Huber, J. Tiley and H. L. Fraser: Scripta Mater., 2005, vol. 52, pp. 387-392.10.1016/j.scriptamat.2004.10.019 ↗
41. M. El Wahabi, L. Gavard, F. Montheillet, J. M. Cabrera and J. M. Prado: Acta Mater., 2005, vol. 53, pp. 4605-4612.10.1016/j.actamat.2005.06.020 ↗
42. Dongdong Li, Weifeng Wan, Lvqi Zhu, Yong Jiang, Shouqi Shao, Gaojing Yang, Huiqun Liu, Danqing Yi, Shuo Cao and Qingmiao Hu: Acta Mater., 2018, vol. 151, pp. 406-415.10.1016/j.actamat.2018.03.056 ↗
43. K. Huang and R. E. Logé, In Reference Module in Materials Science and Materials Engineering, (Elsevier: 2016).
44. F. Humphreys, Gregory S. Rohrer and Anthony Rollett: Recrystallization and Related Annealing Phenomena: Third Edition. Elsevier Ltd, 2017.
45. L. J. Huang, L. Geng, H. X. Peng and B. Kaveendran: Mater. Sci. Eng., A, 2012, vol. 534, pp. 688-692.10.1016/j.msea.2011.12.028 ↗
46. H L Cox: British Journal of Applied Physics, 1952, vol. 3, p. 72.10.1088/0508-3443/3/3/302 ↗
47. E. O. Hall: Proceedings of the Physical Society. Section B, 1951, vol. 64, pp. 747-753.10.1088/0370-1301/64/9/303 ↗
48. N. J. Petch: Journal of the Iron and Steel Institute 1953, vol. 174, pp. 25-28.
49. C. J. Boehlert, S. Tamirisakandala, W. A. Curtin and D. B. Miracle: Scripta Mater., 2009, vol. 61, pp. 245-248.10.1016/j.scriptamat.2009.03.054 ↗
50. Xiu Song, Lei Wang, Mitsuo Niinomi, Masaaki Nakai and Yang Liu: Mater. Sci. Eng., A, 2015, vol. 640, pp. 154-164.10.1016/j.msea.2015.05.078 ↗
51. Y. M. Wang and E. Ma: Acta Mater., 2004, vol. 52, pp. 1699-1709.10.1016/j.actamat.2003.12.022 ↗
52. Y. M. Wang and E. Ma: Mater. Sci. Eng., A, 2004, vol. 375-377, pp. 46-52.10.1016/j.msea.2003.10.214 ↗