journal article·2020-04

New Triazole and Isoxazole Compounds as Corrosion Inhibitors for Cu-Ni (90/10) Alloy and Galvanized Steel Substrates

M. A. Domínguez-Crespo, L. Gerardo Zepeda-Vallejo, A. M. Torres-Huerta, S. B. Brachetti-Sibaja, D. Palma-Ramírez, A. E. Rodríguez-Salazar, D. E. Ontiveros-de la Torre

Publisher page

Abstract

Three organic compounds containing azole rings 1-benzyl-4-phenyl-1H-1,2,3-triazole (I1), 5-phenyl-3-propylisoxazole (I2), and 3,5-diphenylisoxazole (I3) were synthesized and characterized as corrosion inhibitors on galvanized steel and copper-nickel (Cu-Ni, 90/10) substrates. The three tested azole inhibitors acted as corrosion inhibitors on galvanized steel in the presence of real cooling water used as electrolyte. Electrochemical performance indicated that the presence of heteroatoms, such as N and O, with free pair electrons, the chain length, and the aromatic ring plays an important role in the capacity to inhibit corrosion of galvanized steel. 3,5-diphenylisoxazole (I3) has the best inhibition activity with jcorr of 2.04 × 10−7 (5 ppm), 7.57 × 10−8 (10 ppm), and 1.73 × 10−8 (20 ppm) A cm−2, followed by compounds I1 and I2. The synthesized compounds are comparable or even higher than the electrochemical performance of commercial inhibitor tolyltriazole (TTA, jcorr = 3.06 × 10−8 A cm−2). Conversely, for Cu-Ni (90/10) substrates, commercial TTA with 20 ppm displayed the lowest corrosion current densities (jcorr = 3.20 × 10−8 A cm−2) through a characteristic anodic pseudo-passivation; however, pits were observed after ~550 mVAg/AgCl. In contrast, the synthesized compounds tended to suppress anodic copper dissolution at positive potentials but, in the best case, displayed greater corrosion rates I3 (1.463 mils per year (MPY)), I2 (1.515 MPY), and I1 (0.677 MPY) in comparison with TTA (0.091 MPY). The low inhibition efficiency (IE) of synthesized compounds is correlated to the weak absorption on the copper surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. A. Colombo, L. Oldani, and S.P. Trasatti: Eng. Fail. Analy., 2018, vol. 84, pp. 46–58.10.1016/j.engfailanal.2017.10.008 ↗
2. J. Ma, Y. Wang, and X. Feng: Energy, 2018, vol. 150, pp. 797–815.10.1016/j.energy.2018.03.029 ↗
3. K. Rahmani: Appl. Therm. Eng., 2017, vol. 114, pp. 849–56.10.1016/j.applthermaleng.2016.12.075 ↗
4. J.C. Hensley: Cooling Tower Fundamentals, 2nd ed., The Marley Cooling Tower Company, Overland Park, KS, 2009, pp. 1–116.
5. J.W. McCoy: The Chemical Treatment of Cooling Water, 2nd ed., Chemical Publishing Company Co. Inc., New York, NY, 1983, pp. 1–301.
6. I. Gurrappa: J. Mater. Process. Technol., 2005, vol. 166, pp. 256–67.10.1016/j.jmatprotec.2004.09.074 ↗
7. C. Schulze, B. Raabe, C. Herrmann, and S. Thiede: Proc. CIRP, 2018, vol. 69, pp. 277–82.10.1016/j.procir.2017.11.034 ↗
8. P. Imani-Mofrad, Z.H. Saeed, and M. Shanbedi: Energy Conv. Manag., 2016, vol. 127, pp. 199–207.10.1016/j.enconman.2016.09.009 ↗
9. P. Shahali, M. Rahmati, S.R. Alavi, and A. Sedaghat: Int. J. Refriger., 2016, vol. 65, pp. 80–91.10.1016/j.ijrefrig.2015.12.004 ↗
10. A.C.C. Tomás, S.D.O. Araujo, M.D. Paes, A.R.M. Primo, J.A.P. Da Costa, and A.A.V. Ochoa: Appl. Therm. Eng., 2018, vol. 144, pp. 444–56.10.1016/j.applthermaleng.2018.08.076 ↗
11. X.-Q. Zhang, X. Han, X. Zhang, S.-Q. Yang, and M.-X. Du: Sep. Purif. Technol., 2020, vol. 234, p. 116045.10.1016/j.seppur.2019.116045 ↗
12. N. Gilani, A. DoustaniHendijani, and R. Shirmohammadi: Appl. Therm. Eng., 2019, vol. 154, pp. 180–95.10.1016/j.applthermaleng.2019.03.043 ↗
13. M. Rahmati, S.R. Alavi, and M.R. Tavakoli: Energy Conv. Manag., 2016, vol. 126, pp. 971–81.10.1016/j.enconman.2016.08.059 ↗
14. N. Walraven, W. Pool, and C. Chapman: J. Water Process Eng., 2016, vol. 13, pp. 196–205.10.1016/j.jwpe.2016.09.005 ↗
15. X. Qi, Y. Liu, Q. Guo, J. Yu, and S. Yu: Energy, 2016, vol. 97, pp. 435–43.10.1016/j.energy.2015.12.125 ↗
16. R. Hassanzadeh and M. Khalili: J. Build. Eng., 2018, vol. 18, pp. 331–42.10.1016/j.jobe.2018.04.001 ↗
17. M.R. Choudhury, R.D. Vidic, and D.A. Dzombak: Arab. J. Sci. Eng., 2014, vol. 39, pp. 7741–49.10.1007/s13369-014-1385-z ↗
18. E. Ilhan-Sungur, D. Ozuolmez, A. Çotuk, N. Cansever, and G. Muyzer: Anaerobe, 2017, vol. 43, pp. 27–34.10.1016/j.anaerobe.2016.11.005 ↗
19. E. Ilhan-Sungur and A. Çotuk: Corr. Sci., 2010, vol. 52, pp. 161–71.10.1016/j.corsci.2009.08.049 ↗
20. J. Narenkumar, P. Elumalai, S. Subashchandrabose, M. Megharaj, R. Balagurunathan, K. Murugan, and A. Rajasekar: Chemosphere, 2019, vol. 222, pp. 611–18.10.1016/j.chemosphere.2019.01.193 ↗
21. H.-H. Ou, Q.T.P. Tran, and P.-H. Lin: Corr. Sci., 2018, vol. 133, pp. 231–39.10.1016/j.corsci.2018.01.014 ↗
22. M.E. Mitzithra, F. Deby, J.P. Balayssac, and J. Salin: Nucl. Eng. Des., 2015, vol. 288, pp. 42–55.10.1016/j.nucengdes.2015.03.018 ↗
23. A. Dhorat, M.A. Al-Obaidi, and I.M. Mujtaba: Therm. Sci. Eng. Progr., 2019, vol. 9, pp. 30–43.10.1016/j.tsep.2018.10.013 ↗
24. R. Touir, M. Cenoui, M. El Bakri, and M. Ebn Touhami: Corr. Sci., 2008, vol. 50, pp. 1530–37.10.1016/j.corsci.2008.02.011 ↗
25. L.J. Yang, L. Chen, X.Z. Du, and Y.P. Yang: Int. J. Therm. Sci., 2013, vol. 64, pp. 178–87.10.1016/j.ijthermalsci.2012.08.010 ↗
26. Y. Lu, Z. Guan, H. Gurgenci, K. Hooman, S. He, and D. Bharathan: Energy Conv. Manag., 2015, vol. 91, pp. 238–48.10.1016/j.enconman.2014.12.018 ↗
27. H.T. Liao, L.J. Yang, X.Z. Du, and Y.P. Yang: Int. J. Therm. Sci., 2015, vol. 94, pp. 178–92.10.1016/j.ijthermalsci.2015.03.004 ↗
28. M. Goodarzi and R. Ramezanpour: Energy Conv. Manag., 2014, vol. 77, pp. 243–49.10.1016/j.enconman.2013.09.022 ↗
29. M.A. Goudarzi: Energy, 2013, vol. 62, pp. 164–72.10.1016/j.energy.2013.09.033 ↗
30. L. Chen, L. Yang, X. Du, and Y. Yang: Appl. Therm. Eng., 2016, vol. 106, pp. 537–50.10.1016/j.applthermaleng.2016.06.046 ↗
31. G.O. Ilevbare and G.T. Burstein: Corr. Sci., 2003, vol. 45, pp. 1545–69.10.1016/S0010-938X(02)00229-9 ↗
32. Q. Ma, S. Qi, X. He, Y. Tang, and G. Lu: Corr. Sci., 2017, vol. 129, pp. 91–101.10.1016/j.corsci.2017.09.025 ↗
33. K. Rahmani, R. Jadidian, and S. Haghtalab: Desalination, 2016, vol. 393, pp. 174–85.10.1016/j.desal.2015.07.026 ↗
34. Y. Qiang, S. Zhang, L. Guo, X. Zheng, B. Xiang, and S. Chen: Corr. Sci., 2017, vol. 119, pp. 68–78.10.1016/j.corsci.2017.02.021 ↗
35. L. Guo, I.B. Obot, X. Zheng, X. Shen, Y. Qiang, S. Kaya, and C. Kaya: Appl. Surf. Sci., 2017, vol. 406, pp. 301–06.10.1016/j.apsusc.2017.02.134 ↗
36. N. Gladkikh, Y. Makarychev, M. Maleeva, M. Petrunin, L. Maksaeva, A. Rybkina, A. Marshakov, and Y. Kuznetsov: Progr. Organ. Coat., 2019, vol. 132, pp. 481–89.10.1016/j.porgcoat.2019.04.004 ↗
37. N. Kovačević and A. Kokalj: Mater. Chem. Phys., 2012, vol. 137, pp. 331–39.10.1016/j.matchemphys.2012.09.030 ↗
38. A. Popova, M. Christov, and A. Zwetanova: Corr. Sci., 2007, vol. 49, pp. 2131–43.10.1016/j.corsci.2006.10.021 ↗
39. R. Subramanian and V. Lakshminarayanan: Corr. Sci., 2002, vol. 44, pp. 535–54.10.1016/S0010-938X(01)00085-3 ↗
40. M. Finšgar, B. Petovar, K. Xhanari, and U. Maver: Corr. Sci., 2016, vol. 111, pp. 370–81.10.1016/j.corsci.2016.05.028 ↗
41. A. Zarrouk, B. Hammouti, T. Lakhlifi, M. Traisnel, H. Vezin, and F. Bentiss: Corr. Sci., 2015, vol. 90, pp. 572–84.10.1016/j.corsci.2014.10.052 ↗
42. A. Dutta, S.K. Saha, P. Banerjee, and D. Sukul: Corr. Sci., 2015, vol. 98, pp. 541–50.10.1016/j.corsci.2015.05.065 ↗
43. L. Li, X. Zhang, S. Gong, H. Zhao, Y. Bai, Q. Li, and L. Ji: Corr. Sci., 2015, vol. 99, pp. 76–88.10.1016/j.corsci.2015.06.003 ↗
44. G. Sığırcık, T. Tüken, and M. Erbil: Corr. Sci., 2016, vol. 102, pp. 437–45.10.1016/j.corsci.2015.10.036 ↗
45. N. Kıcır, G. Tansuğ, M. Erbil, and T. Tüken: Corr. Sci., 2016, vol. 105, pp. 88–99.10.1016/j.corsci.2016.01.006 ↗
46. B. Tan, S. Zhang, H. Liu, Y. Qiang, W. Li, L. Guo, and S. Chen: J. Taiwan Inst. Chem. Eng., 2019, vol. 102, pp. 424–37.10.1016/j.jtice.2019.06.005 ↗
47. H. Wang, Y. Hao, S. Chen, M. Cheng, C. Li, S. Sun, and S. Hu: Corr. Sci., 2018, vol. 137, pp. 33–42.10.1016/j.corsci.2018.03.009 ↗
48. E. Garcia-Ochoa, S.J. Guzmán-Jiménez, J.G. Hernández, T. Pandiyan, J.M. Vásquez-Pérez, and J. Cruz-Borbolla: J. Molec. Struct., 2016, vol. 1119, pp. 314–24.10.1016/j.molstruc.2016.04.057 ↗
49. J.V. Custódio, S.M.L. Agostinho, and A.M.P. Simões: Electrochim. Acta, 2010, vol. 55, pp. 5523–31.10.1016/j.electacta.2010.03.072 ↗
50. L. Jiang, Y. Lan, Y. He, Y. Li, Y. Li, and J. Luo: Thin Solid Films, 2014, vol. 556, pp. 395–404.10.1016/j.tsf.2013.12.047 ↗
51. T. Kosec, D.K. Merl, and I. Milošev: Corr. Sci., 2008, vol. 50, pp. 1987–97.10.1016/j.corsci.2008.04.016 ↗
52. F. Grillo, D.W. Tee, S.M. Francis, H. Früchtl, and N.V. Richardson: Nanoscale, 2013, vol. 5, pp. 5269–73.10.1039/c3nr00724c ↗
53. R. Ravichandran, S. Nanjundan, and N. Rajendran: Appl. Surf. Sci., 2004, vol. 236, pp. 241–50.10.1016/j.apsusc.2004.04.025 ↗
54. J.M. Bastidas, P. Pinilla, E. Cano, J.L. Polo, and S. Miguel: Corr. Sci., 2003, vol. 45, pp. 427–49.10.1016/S0010-938X(02)00123-3 ↗
55. K.H. Wall and I. Davies: J. Appl. Chem., 1965, vol. 15, pp. 389–92.10.1002/jctb.5010150808 ↗
56. A. Fateh, M. Aliofkhazraei, and A.R. Rezvanian: Arab. J. Chem., 2017, vol. 13, pp. 481-54410.1016/j.arabjc.2017.05.021 ↗
57. M.B. PetrovićMihajlović, M.B. Radovanović, Ž.Z. Tasić, and M.M. Antonijević: J. Molec. Liq., 2017, vol. 225, pp. 127–36.10.1016/j.molliq.2016.11.038 ↗
58. Y. Yan, H. Shi, J. Wang, F. Liu, E.-H. Han: Acta Metall. Sinica, 2019, vol. 32, pp. 471–80.10.1007/s40195-018-0777-6 ↗
59. P.B. Raja, M. Ismail, S. Ghoreishiamiri, J. Mirza, M.C. Ismail, S. Kakooei, and A.A. Rahim: Chem. Eng. Comm., 2016, vol. 203, pp. 1145–56.10.1080/00986445.2016.1172485 ↗
60. C.M. Fernandes, L.X. Alvarez, N.E. dos Santos, A.C. MaldonadoBarrios, and E.A. Ponzio: Corr. Sci., 2019, vol. 149, pp. 185–94.10.1016/j.corsci.2019.01.019 ↗
61. A. Espinoza-Vázquez, F.J. Rodríguez-Gómez, B.I. Vergara-Arenas, L. Lomas-Romero, D. Angeles-Beltrán, G.E. Negrón-Silva, and J.A. Morales-Serna: RSC Adv., 2017, vol. 7, pp. 24736–24746.10.1039/C7RA01325F ↗
62. A.L.G.M. Stern: J. Electrochem. Soc., 1957, vol. 104, pp. 56–63.10.1149/1.2428496 ↗
63. F. Friscourt and G.-J. Boons: Org. Lett., 2010, vol. 12, pp. 4936–39.10.1021/ol1022036 ↗
64. S. Zhai, Y. Ma, Y. Chen, D. Li, J. Cao, Y. Liu, M. Cai, X. Xie, Y. Chen, and X. Luo: Polym. Chem., 2014, vol. 5, pp. 1285–97.10.1039/C3PY01325A ↗
65. H. Li, Q. Zheng, and C. Han: Analyst, 2010, vol. 135, pp. 1360–64.10.1039/c0an00023j ↗
66. H. Naeimi, S. Dadashzadeh, and M. Moradian: Res. Chem. Intermed., 2015, vol. 41, pp. 2687–95.10.1007/s11164-013-1379-6 ↗
67. H. Naeimi and R. Shaabani: Ultrason. Sonochem., 2017, vol. 34, pp. 246–54.10.1016/j.ultsonch.2016.05.043 ↗
68. S.G. Aziz, S.A. Elroby, A. Alyoubi, O.I. Osman, and R. Hilal: J. Molec. Model., 2014, vol. 20, p. 2078.10.1007/s00894-014-2078-y ↗
69. R. Huisgen: Ang. Chem. Int. Ed. Engl., 1963, vol. 2, pp. 633–45.10.1002/anie.196306331 ↗
70. W.D.G. Brittain, B.R. Buckley, and J.S. Fossey: ACS Cataly., 2016, vol. 6, pp. 3629–36.10.1021/acscatal.6b00996 ↗
71. G. Cheng and X. Cui: Organ. Lett., 2013, vol. 15, pp. 1480–83.10.1021/ol400219n ↗
72. P.A. Ledin, F. Friscourt, J. Guo, and G.-J. Boons: Chem. Eur. J., 2011, vol. 17, pp. 839–46.10.1002/chem.201002052 ↗
73. I.A. Muhammad Naeem Ahmed, W. Bo, S. Hammed, B. Ahmad Khan, K. Ansar Yasin, and M. Moazzam Nasser: Chin. J. Struct. Chem., 2014, vol. 12, pp. 1749–56.
74. P. Grunanger and P. Vita-Finzi: Chemistry of Heterocyclic Compounds, John Wiley & Sons, Inc., New York, NY, 1991, pp. 1–416.
75. J. Stothers: Carbon-13 NMR Spectroscopy: Organic Chemistry, A Series of Monographs, 24th volume, Academic Press, New York, NY, 1972, pp. 1–547.
76. L. Di Nunno, A. Scilimati, and P. Vitale: Tetrahedron, 2002, vol. 58, pp. 2659–65.10.1016/S0040-4020(02)00125-4 ↗
77. C.D. Turner and M.A. Ciufolini: Rev. Acc., 2011, vol. 2011, pp. 410–28.
78. A.M. Jawalekar, E. Reubsaet, F.P.J.T. Rutjes, and F.L. van Delft: Chem. Commun., 2011, vol. 47, pp. 3198–3200.10.1039/c0cc04646a ↗
79. G.K. Gomma: Mater. Chem. Phys., 1998, vol. 56, pp. 27–34.10.1016/S0254-0584(98)00086-8 ↗
80. H. Rahmani and E.I. Meletis: Appl. Surf. Sci., 2019, vol. 497, p. 143759.10.1016/j.apsusc.2019.143759 ↗
81. E.-S.M. Sherif, R.M. Erasmus, and J.D. Comins: Electrochim. Acta, 2010, vol. 55, pp. 3657–63.10.1016/j.electacta.2010.01.117 ↗
82. M.S. El-Sayed: Int. J. Electrochem. Sci., 2012, vol. 7, pp. 1884–97.10.1016/S1452-3981(23)13847-8 ↗
83. W.A. Badawy, K.M. Ismail, and A.M. Fathi: Electrochim. Acta, 2006, vol. 51, pp. 4182–89.10.1016/j.electacta.2005.11.037 ↗
84. Ž.Z. Tasić, M.B. PetrovićMihajlović, M.B. Radovanović, A.T. Simonović, and M.M. Antonijević: J. Molec. Struct., 2018, vol. 1159, pp. 46–54.10.1016/j.molstruc.2018.01.031 ↗
85. D. Gopi, E.-S.M. Sherif, M. Surendiran, D.M. AngelineSakila, and L. Kavitha: Surf. Interface Analy., 2015, vol. 47, pp. 618–25.10.1002/sia.5755 ↗
86. D. Gopi, K.M. Govindaraju, V. CollinsArunPrakash, D.M. AngelineSakila, and L. Kavitha: Corr. Sci., 2009, vol. 51, pp. 2259–65.10.1016/j.corsci.2009.06.008 ↗
87. A.C. Bastos, M.G.S. Ferreira, and A.M. Simões: Progr. Organ. Coat., 2005, vol. 52, pp. 339–50.10.1016/j.porgcoat.2004.09.009 ↗
88. M. Mouanga, P. Berçot, and J.Y. Rauch: Corr. Sci., 2010, vol. 52, pp. 3984–92.10.1016/j.corsci.2010.08.003 ↗
89. M. Mouanga and P. Berçot: Corr. Sci., 2010, vol. 52, pp. 3993–4000.10.1016/j.corsci.2010.08.018 ↗
90. K. Tebbji, I. Bouabdellah, A. Aouniti, B. Hammouti, H. Oudda, M. Benkaddour, and A. Ramdani: Mater. Lett., 2007, vol. 61, pp. 799–804.10.1016/j.matlet.2006.05.063 ↗
91. Z. Tang: Curr. Opin. Solid State Mater. Sci., 2019, vol. 23, p. 100759.10.1016/j.cossms.2019.06.003 ↗
92. L.L. Liao, S. Mo, J.L. Lei, H.Q. Luo, and N.B. Li: J. Coll. Interface Sci., 2016, vol. 474, pp. 68–77.10.1016/j.jcis.2016.04.015 ↗
93. C. Shi, Y. Wang, Y. Yu, J. Li, D. Zhang, and L. Gao: Corr. Sci., 2018, vol. 145, pp. 100–08.10.1016/j.corsci.2018.09.019 ↗
94. D.S. Chauhan, M.A. Quraishi, C. Carrière, A. Seyeux, P. Marcus, and A. Singh: J. Mol. Liq., 2019, vol. 289, p. 111113.10.1016/j.molliq.2019.111113 ↗
95. S.U. Ofoegbu, T.L.P. Galvão, J.R.B. Gomes, J. Tedim, H.I.S. Nogueira, M.G.S. Ferreira, and M.L. Zheludkevich: Phys. Chem. Chem. Phys., 2017, vol. 19, pp. 6113–29.10.1039/C7CP00241F ↗
96. A.-R. El-Sayed, H.S. Mohran, and H.M. AbdEl-Lateef: J. Power Sources, 2010, vol. 195, pp. 6924–36.10.1016/j.jpowsour.2010.03.071 ↗
97. S. Savita, P. Mourya, N. Chaubey, V.K. Singh, and M.M. Singh: Metall. Mater. Trans. B, 2016, vol. 47B, pp. 47–57.10.1007/s11663-015-0488-6 ↗
98. T. Tüken, N. Kıcır, N.T. Elalan, G. Sığırcık, and M. Erbil: Appl. Surf. Sci., 2012, vol. 258, pp. 6793–99.10.1016/j.apsusc.2012.03.086 ↗
99. H. OtmacicCurkovic, E. Stupnisek-Lisac, and H. Takenouti: Corr. Sci., 2010, vol. 52, pp. 398–405.10.1016/j.corsci.2009.09.026 ↗
100. F. King: “Critical Review of the Literature on the Corrosion of Copper by Water,” TR-10-69, Svensk Kärnbränslehantering AB, Swedish Nuclear Fuel, and Waste Management Co., Stockholm, 2010.