Use of Fe-C Information as Reference for Alloying Effects on BS
Source abstract
Abstract
Abstract Many empirical equations of the variation of the critical temperature with alloy content of the start of bainite formation in steels are available. They are often obtained by regression analysis of measured values for a large number of alloyed steels, usually with several alloying elements. However, such equations differ considerably, especially when applied to pure Fe-C alloys, which results in large differences between reported effects of individual alloying elements since they have not been based on the Fe-C system as a reference. Apparently, for the first time, an empirical equation is now derived by starting with information from Fe-C alloys and low alloy steels and then adding the effect of each alloying element separately, using information from ternary Fe-C-M alloys. Sets of information from the same alloy content but different carbon contents proved particularly useful. Lines connecting such points are regarded as $$ B_{\text{S}} $$ lines for the respective alloy content and the effect of alloying elements was evaluated from their distance from the $$ B_{\text{S}} $$ line for Fe-C alloys. Only under this condition can coefficients for alloying elements be expected to represent the physical effect of the elements. The resulting equation was tested with about 600 experimental $$ B_{\text{S}} $$ temperatures.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. W. Steven and A.G. Haynes: J. Iron and Steel Inst., 1956, vol. 183, pp. 349–59.
2. S. Kang, S. Yoon and S.-J. Lee: ISIJ Int., 2014, vol. 54, pp. 997-99.10.2355/isijinternational.54.997 ↗
3. J.S. Kirkaldy and G Venugopalan: in Phase Transformations in Ferrous Alloys, A.R. Marder and J.I. Goldstein, eds., TMS AIME, Warrendale, PA, 1984, p. 125.
4. M Suehiro, T Senuma, H Yada, Y Matsumura, T Ariyoshi (1987) Tetsu-to-Hagané 73:1026-33.10.2355/tetsutohagane1955.73.8_1026 ↗
5. R.L. Bodnar, T. Ohashi and R.I. Jaffee: Metall. Trans. A, 1989, vol. 20A, pp. 1445-60.10.1007/BF02665502 ↗
6. J. Zhao and Z. Jin: Mater. Sci. Techn., 1992, vol. 8, pp. 1004-10.10.1179/mst.1992.8.11.1004 ↗
7. T. Kunitake and Y. Okada: J. Iron Steel Japan, 1998. vol. 84, pp.137-41.10.2355/tetsutohagane1955.84.2_137 ↗
8. J.K. Lee, Prediction of Tensile Deformation Behavior of Formable Hot Rolled steels. POSCO Technical Research Laboratories Report, POSCO, Pohang, Korea, 1999.
9. J. Zhao, C. Liu, Y. Liu and D.O. Northwood: J. Mater. Sci., 2001, vol. 36. pp. 5045-56.10.1023/A:1011874708194 ↗
10. Y.K. Lee: J. Mater. Sci., 2002, vol. 21, pp.1253-55.
11. S.M.C. van Bohemen: Mater. Sci. Techn., 2012, vol., 28, pp. 487-95.10.1179/1743284711Y.0000000097 ↗
12. P. Kolmskog, L. Leach, L. Höglund, M. Hillert and A. Borgenstam: Comparison of Critical Temperature and Critical Carbon Content of Bainite Formation. (to be published).
13. M. Hillert: The Growth of Ferrite, Bainite and Martensite, Report, Swedish Inst. Metal Research, 1960. Printed in Thermodynamics and Phase Transformations, The Selected Works of Mats Hillert, eds. J. Ågren, Y. Bréchet, C. Hutchinson, J. Philibert and G. Purdy, EDP Science, Les Ulis Cedex, France, 2006.
14. T. Lyman and A.R. Troiano: Trans. ASM, 1946, vol. 37, pp. 402–48.
15. J.O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: Calphad, 2002, vol.26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
16. Thermo-Calc: TCFE8-TCS Steels/Fe-Alloys Database, v8.0, 2015. http://www.thermocalc.com. Accessed 2017.
17. H.I. Aaronson: in Decomposition of Austenite by Diffusional Processes, V.F. Zackay and H.I. Aaronson, eds., Interscience, New York, 1962, pp. 387–546.
18. S.E. Johanson, Thesis, KTH, Stockholm 1959. Quoted in Ref. 13.
19. R.D. Townsend and J. S. Kirkaldy: Trans. ASM, 1968, vol. 61, pp. 605–19.
20. H.I. Aaronson, P.G. Boswell, and K.R. Kinsman: in Mechanical Properties and Phase Transformations in Engineering Materials—Earl L. Parker Symposiumon Structure Property Relationships TMS-AIME, Warrendale, PA (1986), pp. 467–73.
21. Z.Q. Liu, G. Miyamoto, Z.G. Yang and T. Furuhara: Acta Mater., 2013, vol.61, pp.3120-29.10.1016/j.actamat.2013.02.003 ↗
22. Z.Q. Liu, G. Miyamoto, Z.G. Yang, C. Zhang and T. Furuhara: Metall. Mater. Trans. A, vol. 46A, 2015, pp. 1544-49.10.1007/s11661-015-2744-4 ↗
23. A. Borgenstam, KTH Royal Institute of Technology, Stockholm, Sweden, Unpublished Research, 2005.
24. A. Hultgren: Trans. ASM, 1947, vol. 39, pp. 915-89.
25. M. Hillert: KTH, Royal Institute of Technology, Stockholm, Sweden, Unpublished Research, 1970.
26. S.K. Liu, L. Yang, D.G. Zhu, and J. Zhang: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1991–2000.10.1007/BF02649047 ↗
27. A. Hultgren: Jernkont. Ann. 1951,vol.135, pp. 403-94.
28. K. Tsuzaki, K. Fujiwara, and T. Maki: Mater. Trans., 1991, vol. 8, pp. 667–78.10.2320/matertrans1989.32.667 ↗
29. M. Umemoto and I. Tamura: Acta Metall., 1986, vol. 34, pp. 2235–45.10.1016/0001-6160(86)90169-0 ↗
30. A. Borgenstam and J.M. Ericsson: in Solid-to-Solid Phase Transformations in Inorganic Materials 2005, J.M. Howe, D.E. Laughlin, J.K. Lee, U. Dahmen, and W.A. Soffa, eds., TMS, Warrendale, 2005, pp. 105–10.
31. J.V. Bee, R.W.K. Honeycombe and P.R. Howell: Metall. Trans. A, 1979, vol. 10A, pp. 1207–12.10.1007/BF02811975 ↗
32. H.K.D.H. Bhadeshia, in Solid-to-Solid Phase Transformations 1981, H.I. Aaronson, D.E. Laughlin, R.F. Sekerka, C.M. Wayman, eds., TMS-AIME, Pittsburgh, 1981, pp. 1041–48.
33. H. Goldenstein and H.I. Aaronson: Metall. Trans. A, 1990, vol. 21A, pp. 1465–78.10.1007/BF02672562 ↗
34. F.G. Berry and R.W.K. Honeycombe: Metall. Trans., 1970, vol. 1, pp. 3279–86.10.1007/BF03037854 ↗
35. H. Tsubakino and H. I. Aaronson: Metall. Trans. A, 1987, vol. 18A, pp. 2047–60.10.1007/BF02647077 ↗
36. G.J. Shiflet and H.I. Aaronson: Metall. Trans. A, 1990, vol. 21A, pp. 1413–32.10.1007/BF02672560 ↗
37. W.T. Reynolds, Jr, F.Z. Li, C.K. Shui, and H.I. Aaronson: Metall. Trans. A, 1990, vol. 21A, pp. 1433–63.10.1007/BF02672561 ↗
38. W.T. Reynolds, Jr, S.K. Liu, F.Z. Li, S. Hartfield, and H.I. Aaronson: Metall. Trans. A, 1990, vol. 21A, pp. 1479–91.10.1007/BF02672563 ↗
39. K.M. Wu and M. Enomoto: Scripta Mater., 2002, vol. 46, pp. 569–74.10.1016/S1359-6462(02)00014-3 ↗
40. M. Enomoto: Scripta Mater., 2002, vol. 47, pp. 145–49.10.1016/S1359-6462(02)00120-3 ↗
41. L.M. Pevzner, T.D. Kubyushina, G.M. Rovenskii, and A.I. Samoilov: Soviet Metallography and Treatment of Metals, 1956, vol. 11, pp. 2-20.
42. G. Papadimitriou and J.M.R. Genin, Mater. Res. Soc, 1983, vol. 21, pp. 747-74.10.1557/PROC-21-747 ↗
43. N. Usui, K. Sugimoto, E. Nishida, M. Kobayashi, and S. Hashimoto: CAMP-ISIJ, 1990, vol. 3, p. 2013-14.
44. K. Sugimoto, J. Sakaguchi, T. Iida, and T. Kashima: ISIJ Int., 2000, vol. 40, pp. 920–26.10.2355/isijinternational.40.920 ↗
45. K. Sugimoto, K. Nakano, S. Song, and T. Kashima: ISIJ Int., 2002, vol. 42, pp. 450–55.10.2355/isijinternational.42.450 ↗