Evolution of Microstructure During Double-Sided Friction Stir Welding of Microalloyed Steel
Source abstract
Abstract
Abstract Microstructures observed by analytical scanning and transmission electron microscopy in the overlap region of a double-sided friction-stir-welded microalloyed steel (EH46) were recorded in detail. They are compared with microstructures in the thermomechanically affected region of the weld and with the base material. The differences suggest that the overlap region has been stirred in the single-phase ferrite, and consists mainly of small equiaxed ferrite grains with strain-induced precipitates, while the thermomechanically affected zone was processed in the austenite-ferrite-phase field, resulting in a mixture of bainite lath packets and ferrite grains. The almost complete absence of pearlite or cementite in the overlap region has led to the suggestion that it dissolved during friction stir welding, providing carbon for strain-induced precipitation. Also, in the complex microstructures of the overlap region, ferrite grains containing a high density of cell-like structures were observed, some of them having precipitates nucleated on their intersections. This implies that strain-induced continuous dynamic recrystallization has occurred.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (86)
Show source-provided references
1. 1. G. Cam, Internal. Met. Revs 2011, vol. 56, pp. 1-48.10.1179/095066010X12777205875750 ↗
2. 2. W. M. Thomas, C. J. Dawes, Weld 1996, vol. 75, pp. 41-45.
3. 3. S. Mironov, Y. S. Sato, H. Kokawa, H. Inoue, S.Tsuge, Acta Mater. 2011, vol. 59, pp. 5472 - 5481.10.1016/j.actamat.2011.05.021 ↗
4. 4. Y. S. Sato, T. W. Nelson, C. J. Sterling, Acta Mater. 2005, vol. 53, pp. 637 - 645.10.1016/j.actamat.2004.10.017 ↗
5. 5. S. Rahimi, T. N. Konkova, I. Violatos, T. N. Baker, Metallurgical and Materials Transactions A 2019, vol. 50, pp. 664-687.10.1007/s11661-018-5023-3 ↗
6. 6. J. Young, D. P. Field, T. W. Nelson, Metall. Mater. Trans. A 2013, vol. 44, pp. 3167 - 3175.10.1007/s11661-013-1684-0 ↗
7. 7. M. Gosh, K. Kumar, R. S. Mishra, Scr. Mater. 2010, vol. 63, pp. 851-854.10.1016/j.scriptamat.2010.06.032 ↗
8. 8. P. J. Konol, J. A. Mathers, R. Johnson, J. R. Pickens, J. Ship Prod. 2003, vol. 19, pp. 159 - 164.10.5957/jsp.2003.19.3.159 ↗
9. 9. T. J. Lienert, W. L. Stellwag, B. B. Grimmett, R. W. Warke, Welding Journal, Research Supplement 2003, vol. 82, pp. 1-9.
10. 10. S. Rahimi, B. P. Wynne, T. N. Baker, Metall. Mater. Trans. A 2017, vol. 48, pp. 362-378.10.1007/s11661-016-3833-8 ↗
11. 11. D. Easton, J. Wood, S. Rahimi, A. Galloway, Y. Zhang and C. Hardie, IEEE Transactions on Plasma Science 2016, vol. 44, pp. 1625-1630.10.1109/TPS.2016.2565205 ↗
12. 12. G. Benghalia, S. Rahimi, J. Wood, H. Coules, S. Paddea, Materials Performance and Characterization 2018, vol. 7, pp. 606-629.10.1520/MPC20170091 ↗
13. 13. W. Rae, Z. Lomas, M. Jackson, S. Rahimi, Materials Characterization 2017, vol. 132, pp. 10 - 19.10.1016/j.matchar.2017.07.042 ↗
14. 14. S. J. Barnes, A. Steuwer, S. Mahawish, R. Johnson, P. J. Withers, Mater. Sci. Eng. A 2008, vol. 492, pp. 35 - 44.10.1016/j.msea.2008.02.049 ↗
15. 15. T. N. Baker, N. A. McPherson, Mater. Sci. Technol. 2017, vol. 33, pp. 234-243.10.1080/02670836.2016.1180752 ↗
16. 16. P. L. Threadgill, Sci. Technol. Weld Join. 2007, vol. 12, pp. 357 - 360.10.1179/174329307X197629 ↗
17. 17. A. Ozekcin, H. W. Jin, J. Y. Koo, N. V. Bangaru, R. Ayer, G. Vaugn, R. Steel, S. Packer, Int. J. Offshore Polar Eng. 2004, vol. 14, pp. 284–288.
18. 18. T. F. A. Santos, T. F. C. Hermenegildo, C. R. M. Afonso, R. R. Marinho, M. T. P. Paes, A. J. Ramirez, Eng. Frac. Mech. 2010, vol. 77, pp. 2937-2945.10.1016/j.engfracmech.2010.07.022 ↗
19. 19. P. Baillie, S. W. Campbell, A. M. Galloway, S. R. Cater, N. A. McPherson, International Journal of Chemical, Nuclear, Metallurgical and Materials Engineering 2014, vol. 8, pp. 651 - 655.
20. 20. R. M. Alé, J. M. A. Rebello, J. Charlier, Mater. Char. 1996, vol. 37, pp. 89-93.10.1016/S1044-5803(96)00069-1 ↗
21. 21. P. Gong, E. J. Palmiere, W. M. Rainforth, Mater. Char. 2017, vol. 124, pp. 83-89.10.1016/j.matchar.2016.12.009 ↗
22. E. Orowan: Symposium on Internal Stresses in Metals and Alloys, Institute of Metals, 1948, pp. 451–57.
23. 23. A. W. Thompson, Metall. Trans. A 1977, vol. 8, pp. 833-842.10.1007/BF02661564 ↗
24. 24. G. K. Padhy, C. S. Wu, S. Gao, J. Mater. Sci. Technol 2018, vol. 34, pp. 1-38.10.1016/j.jmst.2017.11.029 ↗
25. W.J. Arbegast: in TMS Annual Meeting on Hot Deformation of Aluminum Alloys III, Z. Jin, A. Beaudoin, T.A. Bieler, and B. Radhakrishnan, eds., Warrendale, PA, USA, 2003, p. 313.
26. 26. D. H. Choi, B. W. Ahn, Y. M. Yeon, S. H. C. Park, Y. S. Sato, H. Kokawa, S. B. Jung, Mater. Trans. A 2011, vol. 52, pp. 1500-1505.10.2320/matertrans.M2010438 ↗
27. 27. P. Xue, Z.Y. Ma, Y. Komizo, H. Fujii,, Mater. Lett. 2016, vol. 162, pp. 161-164.10.1016/j.matlet.2015.09.115 ↗
28. 28. L. Y. Wei, T. W. Nelson, Mater. Sci. Eng. A 2012, vol. 556, pp. 51 - 59.10.1016/j.msea.2012.06.057 ↗
29. 29. H. Fujii, L. Cui, N. Tsuji, M.Maeda, K. Nakataand, K. Nogi, Mater. Sci. Eng. A 2006, vol. 429, pp. 50-57.10.1016/j.msea.2006.04.118 ↗
30. 30. P. Baillie, S. W. Campbell, A. M. Galloway, S. R. Cater, N. A. McPherson, Sci. Technol. Weld Join. 2015, vol. 20, pp. 585-593.10.1179/1362171815Y.0000000042 ↗
31. 31. D. J. Shindo, A. R. Rivera, L. E. Murr, J. Mater. Sci. 2002, vol. 37, pp. 4999–5005.10.1023/A:1021023329430 ↗
32. 32. Z. Y. Ma, A. H. Feng, B. L. Xiao, J. Z. Fan, L. K. Shi, Mater. Sci. Forum 2007, vol. 539-543, pp. 3814-3819.10.4028/www.scientific.net/MSF.539-543.3814 ↗
33. 33. A. Azushima, R. Kopp, A. Korhonen, D. Y. Yang, F. Micari, G. D. Lahoti, P. Groche, J. Yanagimoto, N. Tsuj, A. Rosochowski, A. Yanagida, Cirp annals-manufacturing technology 2008, vol. 57, pp. 716-735.10.1016/j.cirp.2008.09.005 ↗
34. 34. A. Ohmori, S. Torizuka, K. Nagai, K. Koseki,Y. Kogo,, Mater. Trans 2004, vol. 45, pp. 2224-2231.10.2320/matertrans.45.2224 ↗
35. 35. C. Borchers, R. Kirchheim, Progress in Materials Science 2016, vol. 82, pp. 405–444.10.1016/j.pmatsci.2016.06.001 ↗
36. 36. F. Wetscher, A. Vorhauer, R. Stock, R. Pippan, Mater. Sci. Eng. A 2004, vol. 387, pp. 809-816.10.1016/j.msea.2004.01.096 ↗
37. 37. M. H. Hong, W. T. Reynolds, T. Tauri, K. Hono, Metall. Mater. Trans. A 1999, vol. 30, pp. 717-727.10.1007/s11661-999-1003-y ↗
38. 38. C. W. Bang, J. B. Seol, Y. S. Yang, C. G. Park, Scr. Mater. 2015, vol. 108, pp. 151–155.10.1016/j.scriptamat.2015.07.004 ↗
39. 39. G. A. Nematollahi, J. V. Pezold, J. Neugebauer, D. Raabe, Acta Mater. 2013, vol. 61, pp. 1773-1784.10.1016/j.actamat.2012.12.001 ↗
40. 40. V. N. Gridnev, V. G. Garvrilyuk, Physics of metals 1982, vol. 4, pp. 531-551.
41. 41. Y. Ivanisenko, W. Lojkowski, R. Z. Valiev, H. J. Fecht, Acta Mater. 2003, vol. 51, pp. 5555-5570.10.1016/S1359-6454(03)00419-1 ↗
42. 42. H. K. D. H. Bhadeshia, Philosophical Magazine 2013, vol. 93, pp. 3714-3725.10.1080/14786435.2013.775518 ↗
43. 43. E. V. Pereloma, Mater.Sci.Technol. 2016, vol. 32, pp. 99-103.10.1179/1743284715Y.0000000139 ↗
44. 44. C. Aranas Jr, S. F. Rodrigues, R. Grewal, J. J. Jonas, ISIJ Inter. 2015, vol. 55, pp. 2426-2434.10.2355/isijinternational.ISIJINT-2015-320 ↗
45. 45. H. Yada, C-M. Li, H. Yamagata, ISIJ Inter. 2000, vol. 40, pp. 200–206.10.2355/isijinternational.40.200 ↗
46. 46. S-C. Chen, C-Y. Huang, Y-T. Wang, H-W. Yen, Mater. Des. 2017, vol. 134, pp. 434-445.10.1016/j.matdes.2017.08.074 ↗
47. 47. Y. Matsumura, H. Yada, Trans. Iron Steel Inst. Jpn. 1987, vol. 27, pp. 492-498.10.2355/isijinternational1966.27.492 ↗
48. 48. B. Hutchinson, J. Komenda, Mater. Sci. Technol. 2018, vol. 34, pp. 1197–1200.10.1080/02670836.2018.1430726 ↗
49. 49. Y. J. Li, P. Choi, C. Borchers, S. Westerkamp, S. Goto, D. Raabe, R. Kirchheim, Acta Mater. 2011, vol. 59, pp. 3965–3977.10.1016/j.actamat.2011.03.022 ↗
50. D.P. Fairchild, A.J. Wasson, A. Kumar, M.L. Macia, T.D. Anderson, H.W. Jin, R. Ayer, N. Ma, and A. Ozekcin: in 9th International Conference Trends in Welding Research, T. DebRoy, et al., eds., Chicago, 2012, pp. 193–200.
51. 51. F. S. LePera, Metallography 1979, vol. 12, pp. 263-268.10.1016/0026-0800(79)90041-7 ↗
52. H.K.D.H. Bhadeshia: Proc. Int. Semin. ‘Welding of high strength linepipe steels’, CBMM/TMS, USA, 2013, pp. 99–106.
53. 53. T. Takeyama, E. J. Koepel, Philos. Mag. 1963, vol. 8, pp. 2103-2108.10.1080/14786436308209103 ↗
54. 54. T. N. Baker, Acta Metall. 1973, vol. 21, pp. 261- 266.10.1016/0001-6160(73)90012-6 ↗
55. 55. V. K. Heikkinen, Scand. J. Metall. 1974, vol. 3, pp. 41-45.
56. 56. H. P. Van Landeghem, M. Véron, S. D. Catteau, J. Teixeira, J. Dulcy, A. Redjaïmia, S. Denis, Scr. Mater. 2018, vol. 155, pp. 63-67.10.1016/j.scriptamat.2018.06.021 ↗
57. 57. K. Poorhaydari, B. M. Patchett, D. G. Ivey, Mater. Sci. Eng. A 2006, vol. 435–436, pp. 371–382.10.1016/j.msea.2006.07.055 ↗
58. 58. A. T. Davenport, J. Iron Steel Inst. 1968, vol. 206, pp. 499–501.
59. 59. K. Huang, R. E. Logé, Mater Des. 2016, vol. 111, pp. 548-574.10.1016/j.matdes.2016.09.012 ↗
60. 60. T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, J. J. Jonas, Prog. Mater. Sci. 2014, vol. 60, pp. 130–207.10.1016/j.pmatsci.2013.09.002 ↗
61. 61. J. Q. Su, T. W. Nelson, R. Mishra, M. Mahoney, Acta Mater. 2003, vol. 51, pp. 713-729.10.1016/S1359-6454(02)00449-4 ↗
62. 62. P. A. Beck, P. R. Sperry, J. Appl. Phys. 1950, vol. 21, pp. 150-152.10.1063/1.1699614 ↗
63. R. D. Doherty, D. A. Hughes, F. J. Humphreys, J. J. Jonas, D. Juul Jensen, M. E. Kassner, W. E. King, T. R. McNelly, H. J. McQueen, A. D. Rollett, Mater. Sci. Eng. A 1997, vol. 238, pp. 219-274.10.1016/S0921-5093(97)00424-3 ↗
64. 64. K. Haung, K. Marthinsen, Q. Zhao, R. E. Logé, Progr.Mater.Sci. 2018, vol. 92, pp. 284-359.10.1016/j.pmatsci.2017.10.004 ↗
65. 65. T. N. Baker, N. A. McPherson, Metal Sci. 1979, vol. 13, pp. 611-618.10.1179/msc.1979.13.11.611 ↗
66. 66. S. G. Hong, K. B. Kang, C. G. Park, Scr. Mater. 2002, vol. 46, pp. 163-168.10.1016/S1359-6462(01)01214-3 ↗
67. 67. S. Shanmugam, R. D. K. Misra, T. Mannering, D. Panda, S. G. Jansto, Mater. Sci. Eng. A 2006, vol. 437, pp. 436-445.10.1016/j.msea.2006.08.007 ↗
68. 68. Z. Wang, X. Mao, Z. Yanga, X. Sun, Q. Yong, Z. Li, Y. Weng, Mater. Sci. Eng. A 2011, vol. 529, pp. 459–467.10.1016/j.msea.2011.09.062 ↗
69. 69. J. Cheng, J. Qing, H. F. Shen, Strength of Materials 2018, vol. 50, pp. 218–228.10.1007/s11223-018-9962-0 ↗
70. 70. K. Xu, B. G. Thomas, R. O’Malley, Metall.Mater.Trans A 2011, vol. 42, pp. 524-539.10.1007/s11661-010-0428-7 ↗
71. 71. S. F. Medina, A. Quispe, M. Gomez, Metall. Mater. Trans. A 2014, vol. 45, pp. 1524-1539.10.1007/s11661-013-2068-1 ↗
72. 72. A. T. Davenport, L. C. Brossard, R. E. Miner, J. Met. 1975, vol. 27, pp. 21-27.
73. 73. W.B. Lee, S. G. Hong, C. G. Park, K. H. Kim, S. H. Park, Scr. Mater. 2000, vol. 43, pp. 319–324.10.1016/S1359-6462(00)00411-5 ↗
74. 74. M. Nöhrer, W. Mayer, S. Zamberger, E. Kozeschnik, H.Leitner, Steel Res. Internal 2014, vol. 85, pp. 679-688.10.1002/srin.201300185 ↗
75. 75. S. Zajac, Mater. Sci. Forum 2005, vol. 500-501, pp. 75-86.10.4028/www.scientific.net/MSF.500-501.75 ↗
76. 76. A. Kelly, R. B. Nicholson, Progr.Mater.Sci. 1963, vol. 10, pp. 149-391.
77. H. Gleiter and E. Hornbogen: Mater. Sci. Eng., 1967/1968, vol. 2, pp. 285–302.10.1016/0025-5416(68)90047-5 ↗
78. 78. A. J. Ardell, Metal.Trans. A 1985, vol. 16, pp. 2131-2165.10.1007/BF02670416 ↗
79. J. W. Martin, R. D. Doherty: Stability of microstructure in metallic systems. (Cambridge University Press, Cambridge, 1976), pp. 270-275.
80. 80. B. Yang, Y. T. Zhou, D. Chen, X. L. Ma, Sci. Rep. 2013, vol. 3, p. 1039.10.1038/srep01039 ↗
81. T.N. Baker and A.J. Lapointe: in Developments in Electron Microscopy and Analysis, D.L Misell, ed., Institute of Physics, London, 1977, pp. 195–98.
82. 82. S. L. Sass, T. Mura, J. B. Cohen, Philos. Mag. 1967, vol. 16, pp. 679-690.10.1080/14786436708222768 ↗
83. 83. T.N. Baker, Ironmak. Steelmak. 2016, vol. 43, pp. 264-307.10.1179/1743281215Y.0000000063 ↗
84. 84. K. Narita, Trans. Iron Steel Inst. Jpn. 1975, vol. 15, pp. 145-152.10.2355/isijinternational1966.15.145 ↗
85. 85. T. Gladman: Microalloyed Steels. (Institute of Materials, London, 1997).
86. 86. K. A. Taylor, Scripta Metall.Mater. 1995, vol. 32, pp. 7-12.10.1016/S0956-716X(99)80002-8 ↗