journal article·2019-02-15

Modeling of Carbide Spheroidization Mechanism of 52100 Bearing Steel Under Warm Forming Conditions

Tao He, Yuanming Huo, Xiaojun Shi, Shoushuang Chen

Publisher page

Abstract

Direct deformation spheroidization of bearing steel can produce a fine and homogeneous microstructure. Warm-compression experiments were performed to investigate the carbide spheroidization behavior of 52100 bearing steel at temperatures of 650 °C to 750 °C and strain rates of 0.1 to 10.0 s−1. A set of mechanism-based unified constitutive equations was developed using the internal state variable method to describe the carbide spheroidization and metal flow behaviors of 52100 steel under warm deformation. The carbide spheroidization fraction, dislocation density, and phase transformation were modeled and correlated with unified constitutive equations. Material parameters in the constitutive equations were determined using genetic algorithm optimization techniques. The developed constitutive equations were validated by comparing the predicted and experimental results. Good consistency between these results indicated that the carbide spheroidization and metal flow behavior could be predicted using these constitutive equations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Alloys Wear and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Guohui Zhu and Gang Zheng: Frontiers of Materials Science in China, 2008, vol. 2, pp. 72-75.10.1007/s11706-008-0013-9 ↗
2. Yunhong Jiang and Jing Zhou: Heat Treatment, 2009, vol. 24, pp. 11-16.
3. Meng X., Chen Q.: Journal of Anhui University of Technology(Natural Science), 2013) vol. 30, pp. 119-123.
4. W. K. Yan, M. S. Yang, J. H. Du and F. Yu: Iron & Steel, 2010, vol. 45, pp. 63-67.
5. Sun Mingyi, Du Zhenmin, Zheng Xiufang, Qin Wenming and Guo Juncheng: Metal Products, 2013, vol. 39, pp. 22-27.
6. Wang Donghong, Yang Xiao, Zhu Guohui and Chen Qiwei: Journal of Anhui University of Technology, 2009, vol. 26, pp.239-242.
7. Ye Huili, Li Guozhong, Hui Rong, Deng Fengyun and Jiang Jianqing: Metal Hotworking Technology, 2007, vol. 36, pp.30-31.
8. Lei Mao, Jingrong Liu and Yinzhi Cao: Journal of Northeast University of Technology, 1993, vol. 14, pp. 193-197.
9. Qiwei Chen, Guohui Zhu, Shumin Cao and Aimin Zhao: Advanced Materials Research, 2011, vol. 295-297, pp. 515-519.10.4028/www.scientific.net/AMR.295-297.515 ↗
10. Zhengsheng Li, Yuexiang Xia, Dixian Xue, Yi Peng and Shaowen Wang: Iron and Steel, 1995, vol. 31, pp. 35-38.
11. Dalin Sun, Jingrong Liu, Lei Mao, Jun Ci, Shuqin Pan, Youshan Li and Guangcheng Bai: Iron and Steel, 1994, vol. 29, pp. 48-51.
12. L Storojeva, D Ponge, R Kaspar and D Raabe: Acta Mater., 2004, vol. 52, pp. 2209-2220.10.1016/j.actamat.2004.01.024 ↗
13. Longfei Li, Wangyue Yang and Zuqing Sun: Metallurgical and Materials Transactions A, 2008, vol. 39, pp. 624-635.10.1007/s11661-007-9447-4 ↗
14. Ø. Grong and H. Shercliff: Prog. Mater Sci., 2002, vol. 47, pp. 163-282.10.1016/S0079-6425(00)00004-9 ↗
15. J. Lin, Y. Liu, D. C. J. Farrugia and M. Zhou: Philosophical Magazine, 2005, vol. 85, pp. 1967-1987.10.1080/14786430412331305285 ↗
16. Jianguo Lin, Y. Liu and T.A. Dean: International Journal of Damage Mechanics, 2005, vol. 14, 299-319.10.1177/1056789505050357 ↗
17. Yuanming Huo, Qian Bai, Baoyu Wang, Jianguo Lin and Jing Zhou: J. Mater. Process. Technol., 2015, vol. 223, pp. 274-283.10.1016/j.jmatprotec.2015.04.011 ↗
18. Q Bai, J Lin, TA Dean, DS Balint, T Gao and Z Zhang: Mater. Sci. & Eng. A, 2013, vol. 559, pp. 352-358.10.1016/j.msea.2012.08.110 ↗
19. Yuanming Huo, Tao He, Shoushuang Chen and Riming Wu: JOM, 2018, vol. 70, pp. 1112-1117.10.1007/s11837-018-2914-0 ↗
20. Kai Miao, Yanlin He, Naqiong Zhu, Jingjing Wang, Xiaogang Lu and Lin Li: Journal of Alloys & Compounds, 2015, vol. 622, pp. 513-523.10.1016/j.jallcom.2014.10.115 ↗
21. X. Yang, H. Xu, Y. Wang, and J. Ma: IOP Conf. Ser.: Mater. Sci. Eng., 2017, vol. 207, art. no. 012051, https://doi.org/10.1088/1757-899X/207/1/012051.10.1088/1757-899X/207/1/012051 ↗
22. Ze Chai and Ba Fahai: Materials for Mechanical Engineering, 2015, vol. 39, pp. 42-45.
23. Bai, Q., Lin, J., Dean, T. A., Balint, D. S., Gao, T., & Zhang, Z: Materials Science and Engineering A, 2013, vol. 559, pp.352-358.10.1016/j.msea.2012.08.110 ↗
24. Lin J, Ho K C, Dean T A: International Journal of Machine Tools & Manufacture, 2006, vol. 46, pp.1266-1270.10.1016/j.ijmachtools.2006.01.026 ↗
25. H. Dehghan, S. M. Abbasi, A. Momeni and A. Karimi Taheri: Journal of Alloys & Compounds, 2013, vol. 564, pp. 13-19.10.1016/j.jallcom.2013.01.156 ↗
26. Manel Campillo, M. Teresa Baile, Sergi Menargues, Enric MartãN and Antonio Forn: Solid State Phenomena, 2012, vol. 192-193, pp. 454-459.10.4028/www.scientific.net/SSP.192-193.454 ↗
27. Guan Jianhui, Chen Qiwei and Zhu Guohui: Journal of Anhui University of Technology(Natural Science), 2012, vol. 29, pp. 125-128.
28. Y Estrin: J. Mater. Process. Technol., 1998, vol. 80, pp. 33-39.10.1016/S0924-0136(98)00208-8 ↗
29. Martin Becker and Hans Peter Hackenberg: International Journal of Plasticity, 2011, vol. 27, pp. 596-619.10.1016/j.ijplas.2010.08.005 ↗
30. J. Lin, Y. Liu, D. C. J. Farrugia and M. Zhou: Philosophical Magazine, 2005, vol. 85, pp. 1967-1987.10.1080/14786430412331305285 ↗
31. Y. P. Lin, J. Lin, T. A. Dean and P. D. Brown: American Institute of Physics, 2007, vol.907, pp.1199-1204.
32. Hongchao Ji, Jinping Liu, Baoyu Wang, Xuefeng Tang, Jianguo Lin and Yuanming Huo: Journal of Alloys & Compounds, 2017, vol. 693, pp. 674-687.10.1016/j.jallcom.2016.09.230 ↗
33. Bo Li, Qinglin Pan and Zhimin Yin: Journal of Alloys & Compounds, 2014, vol. 584, pp. 406-416.10.1016/j.jallcom.2013.09.036 ↗
34. J. Cao and J. Lin: International Journal of Mechanical Sciences, 2008, vol. 50, pp. 193-204.10.1016/j.ijmecsci.2007.07.003 ↗
35. J. Lin, B. H Cheong and X. Yao: Journal of Materials Processing Tech, 2002, vol. 125, pp. 199-205.10.1016/S0924-0136(02)00311-4 ↗
36. Lin J, Cheong B H, Yao X: Journal of Materials Processing Tech, 2002, vol. 125, pp.199-205.10.1016/S0924-0136(02)00311-4 ↗
37. Lei Yang, Baoyu Wang, Gang Liu, Huijun Zhao and Wenchao Xiao: Materials & Design, 2015, vol. 85, pp. 135-148.10.1016/j.matdes.2015.06.096 ↗
38. Nan Li, Chaoyang Sun, Ning Guo, Mohamed Momhamed, Jianguo Lin and M. Takeki: Procedia Engineering, 2014, vol. 81, pp. 1744-1749.10.1016/j.proeng.2014.10.224 ↗