journal article·2018-12

Effect of β Grain Size on Stress-Induced Martensitic Transformation in β Solution-Treated 51.1Zr-40.2Ti-4.5Al-4.2V Alloy

Yuanbiao Tan, Wenchang Liu, Song Xiang, Fei Zhao, Yilong Liang

Publisher page

Abstract

The effect of β grain size on stress-induced martensitic transformation in β solution-treated 51.1Zr-40.2Ti-4.5Al-4.2V alloy was investigated by using XRD and TEM techniques. The results show that initial β grain size has a profound effect on the triggering stress of the stress-induced martensitic (SIM) transformation. The triggering stress increases with increasing initial β grain size. The SIM transformation significantly affects the deformation behavior of the alloy. A typical double yielding is observed in the stress-strain curves due to the occurrence of the SIM transformation. The curve of work hardening rate vs. true strain is divided into three stages for the samples with small β grain size. The work hardening rate at stage ΙΙ or ΙΙΙ decreases with increasing initial β grain size, which is attributed to the effect of the SIM transformation during a tensile test.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. J.K. Chakravartty, G.K. Dey, S. Banerjee, Y.V.R.K. Prasad: J. Nucl. Mater., 1995, vol. 218, pp. 247-255.10.1016/0022-3115(94)00379-3 ↗
2. A.V. Dobromyslov, N.I. Taluts, N.V. Kazantseva, E.A. Kozlov: Scripta Mater., 1999, vol. 42, pp. 61-71.10.1016/S1359-6462(99)00311-5 ↗
3. J.K. Chakravartty, R. Kapoor, S. Banerjee, Y.V.R.K. Prasad: J. Nucl. Mater., 2007, vol. 362, pp. 75-86.10.1016/j.jnucmat.2006.11.007 ↗
4. R. Kishore, R.N. Singh, G.K. Dey, T.K. Sinha: J. Nucl. Mater., 1992, vol. 187, pp. 70-73.10.1016/0022-3115(92)90320-K ↗
5. Z.N. Yang, F.C. Liu, F.C. Zhang, Z.G. Yan, Y.Y. Xiao: Mater. Sci. Eng. A, 2012, vol. 544, pp. 54-58.10.1016/j.msea.2012.03.014 ↗
6. T.R.G. Kutty, K. Ravi, C. Ganguly: J. Nucl. Mater., 1999, vol. 265, pp. 91-99.10.1016/S0022-3115(98)00610-2 ↗
7. M. Daunys, R. Dundulis, A. Grybenas, P. Krasauskas: Nucl. Eng. Des., 2008, vol. 238, pp. 2536-2545.10.1016/j.nucengdes.2008.05.018 ↗
8. S.X. Liang, M.Z. Ma, R. Jing, X.Y. Zhang, R.P. Liu: Mater. Sci. Eng. A, 2012, vol. 532, pp. 1-5.10.1016/j.msea.2011.10.053 ↗
9. S.X. Liang, M.Z. Ma, R. Jing, C.L. Tan, R.P. Liu: Mater. Sci. Eng. A, 2012, vol. 541, pp. 67-72.10.1016/j.msea.2012.02.003 ↗
10. S.X. Liang, L.X. Yin, X.Y. Liu, R. Jing, Y.K. Zhou, M.Z. Ma, R.P. Liu: Mater. Sci. Eng. A, 2013, vol. 582, pp. 374-378.10.1016/j.msea.2013.06.007 ↗
11. L. Qu, Z.N. Yang, F.C. Zhang, M. Zhang, X.Y. Zhang, R.P. Liu: J. Alloys Compd., 2014, vol. 612, pp. 80-89.10.1016/j.jallcom.2014.05.156 ↗
12. T.W. Duerig, J. Albrecht, D. Richter, P. Fischer: Acta Metall., 1982, vol. 30, pp. 2161-2172.10.1016/0001-6160(82)90137-7 ↗
13. A. Bhattacharjee, S. Bhargava, V.K. Varma, S.V. Kamat, A.K. Gogia: Scripta Mater., 2005, vol. 53, pp. 195-200.10.1016/j.scriptamat.2005.03.039 ↗
14. T. Grosdidier, Y. Combres, E. Gautier, M.J. Philippe: Metall. Trans. A, 2000, vol. 31 pp. 1095-1106.10.1007/s11661-000-0105-3 ↗
15. M. H. Cai, C.Y. Lee, Y. K. Lee: Scripta Mater., 2012, vol. 66, pp. 606-609.10.1016/j.scriptamat.2012.01.015 ↗
16. T. Grosdidier, C. Roubaud, M.J. Philippe, S. Zaefferer, M. Zandona, E. Gautier, Y. Combre: J. Phys. IV, 1996, vol. 6, pp. 435-444.
17. A. Paradkar, S.V. Kamat, A.K. Gogia, B.P. Kashyap: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 551-558.10.1007/s11661-007-9432-y ↗
18. A. Bhattacharjee, V.K. Varma, S.V. Kamat, A.K. Gogia, S. Bhargava: Metall. Mater. Trans. A, 2006, vol. 37A, 1423-1433.10.1007/s11661-006-0087-x ↗
19. Y.N. Liu, H. Yang: Mater. Sci. Eng. A, 1999, vol. 260, pp. 240-245.10.1016/S0921-5093(98)00959-9 ↗
20. F.J. Gil, J.A. Planell: Mater. Sci. Eng. A, 2000, vol. A283, pp. 17-24.10.1016/S0921-5093(00)00731-0 ↗
21. G.B. Olson, M. Cohen: Metall. Trans. A, 1975, vol. 6A, pp. 791-795.10.1007/BF02672301 ↗
22. L.L. Guo, Z.C. Chen, L. Gao: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8537-8545.10.1016/j.msea.2011.07.076 ↗
23. S.Q. Wang, J.H. Liu, D.L. Chen: Mater. Des., 2014, vol. 56, pp. 174-184.10.1016/j.matdes.2013.11.003 ↗
24. U.F. Kocks, H. Mecking: Prog. Mater. Sci., 2003, vol. 48, pp. 171-273.10.1016/S0079-6425(02)00003-8 ↗
25. J. Mittra, J.S. Dubey, U.D. Kulkarni, G.K. Dey: Mater. Sci. Eng. A, 2009, vol. 512, pp. 87-91.10.1016/j.msea.2009.02.053 ↗
26. T. Grosdidier, M.J. Philippe: Mater. Sci. Eng. A, 2000, vol. 291, pp. 218-223.10.1016/S0921-5093(00)00921-7 ↗
27. X. Feaugas: Acta Mater., 1999, vol. 47, pp. 3617-3632.10.1016/S1359-6454(99)00222-0 ↗