journal article·2018-09

Creep Behavior of Quinary γ′-Strengthened Co-Based Superalloys

Robert K. Rhein, Patrick G. Callahan, Sean P. Murray, Jean-Charles Stinville, Michael S. Titus, Anton Van der Ven, Tresa M. Pollock

Publisher page

Abstract

First-principles DFT methods are combined with an experimental approach to characterize the creep behavior of quinary Co-based L1 $$_2$$ -containing superalloys at elevated temperature conditions. Temperature-dependent SISF energies have been modeled, combining 0 K formation energies with vibrational free energy calculations to assess deformation mechanisms at finite temperature. Two different Co-Al-W alloys, containing the maximum possible amount of DFT-identified d-block alloying additions, were identified and cast as single crystals via the Bridgman process. Creep tests have been performed at two primary testing conditions, one at 900 $$^\circ $$ C and the other at 982 $$^\circ $$ C. Transmission scanning electron microscopy (TSEM) was performed at 30 kV in a scanning electron microscope to rapidly characterize the defect substructures. We observe a coupled APB/SISF/APB defect structure in Co-based superalloys at the low-temperature condition, similar to the defect structure observed in CoNi, in spite of containing no Ni. At 982 $$^\circ $$ C, there is no evidence of faults and precipitates instead contain antiphase boundaries. The role of composition and temperature-dependent fault energies in the deformation process is addressed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. J. Sato, T. Omori, K. Oikawa, I. Ohnuma, R. Kainuma, and K. Ishida: Science, 2006, vol. 312, pp. 90-91.10.1126/science.1121738 ↗
2. M.S. Titus, A. Suzuki, and T.M. Pollock: Scr. Mater., 2012, vol. 66, pp. 574-577.10.1016/j.scriptamat.2012.01.008 ↗
3. F. Xue, H.J. Zhou, X.H. Chen, H. Chang, M.L. Wang, and Q. Feng: Scr. Mater., 2015, vol. 97, pp. 37-40.10.1016/j.scriptamat.2014.10.015 ↗
4. T.M. Pollock and A.S. Argon: Acta Metall. Mater., 1992, vol. 40, pp. 1-30.10.1016/0956-7151(92)90195-K ↗
5. M.S. Titus, Y.M. Eggeler, A. Suzuki, and T.M. Pollock: Acta Mater., 2015, vol. 82, pp. 530-539.10.1016/j.actamat.2014.08.033 ↗
6. Y.M Eggler, M.S. Titus, A. Suzuki, and T.M. Pollock: Acta Mater., 2014, vol. 77, pp. 352-359.10.1016/j.actamat.2014.04.037 ↗
7. R.C. Reed: The Superalloys: Fundamentals and Applications, 1st ed., Cambridge University Press, Cambridge, U.K., 2006, pp. 16-30.10.1017/CBO9780511541285 ↗
8. R.C. Reed, N. Matan, D.C. Cox, M.A. Rist, and C.M.F. Rae: Acta Mater., 1999, vol. 47, pp. 3367-3381.10.1016/S1359-6454(99)00217-7 ↗
9. M.S. Titus, A. Mottura, R.K. Rhein, M.H. Chen, A. Van der Ven, and T.M. Pollock: Beyond Nickel-Based Superalloys: Conference Proceedings, ECI Digital Archives, 2016.
10. G. Kresse and J. Hafner: Phys. Rev. B, 1993, vol. 47, pp. 558-561.10.1103/PhysRevB.47.558 ↗
11. G. Kresse and J. Furthmüller: Comput. Mater. Sci., 1996, vol. 6, pp. 15-50.10.1016/0927-0256(96)00008-0 ↗
12. G. Kresse and D. Joubert: Phys. Rev. B, 1999, vol. 59, pp. 1758-1775.10.1103/PhysRevB.59.1758 ↗
13. J.P Perdew, K. Burke, and M. Ernzerhof: Phys. Rev. Lett., 1996, vol. 77, pp. 3865-3868.10.1103/PhysRevLett.77.3865 ↗
14. N. Ashcroft and N. Mermin: Solid State Physics, 1st ed., Brooks Cole, Pacific Grove, 1976.
15. S. Wei and M.Y. Chen: Phys. Rev. Lett., 1992, vol. 69, pp. 2799-2802.10.1103/PhysRevLett.69.2799 ↗
16. M. Born: Dynamical Theory of Crystal Lattices, 1st ed., Clarendon Press, Wotton-under-Edge, UK, 1954.
17. E.A. Lass: Metall. Mater. Trans. A, 2017, vol. 48, pp. 2443-2459.10.1007/s11661-017-4040-y ↗
18. M. Tsunekane, A. Suzuki, and T.M. Pollock: Intermetallics, 2011, vol. 19, pp. 636-643.10.1016/j.intermet.2010.12.018 ↗
19. A.J. Elliot, T.M. Pollock, S. Tin, W.T. King, S.-C. Huang, and M.F.X. Gigliotti: Met. Trans. A, 2004, vol. 35, pp. 3221-3231.10.1007/s11661-004-0066-z ↗
20. C.J. Humphreys: Ultramicroscopy, 1981, vol. 7, pp. 7-12.10.1016/0304-3991(81)90017-6 ↗
21. P.G. Callahan, J.C. Stinville, E.R. Yao, M.P. Echlin, M.S. Titus, D.S. Gianola, M. De Graef, and T.M. Pollock: Ultramicroscopy, 2018, vol. 186, pp. 49-61.10.1016/j.ultramic.2017.11.004 ↗
22. D.J.H. Cockayne: J. Phys., Colloq., 1974, vol. 35, pp. 141-148.10.1051/jphyscol:1974715 ↗
23. A. Mottura, A. Janotti, and T.M. Pollock: Intermetallics, 2012, vol. 28, pp. 138-143.10.1016/j.intermet.2012.04.020 ↗
24. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, vol. 9, pp. 671-675.10.1038/nmeth.2089 ↗
25. J.C. Yen, F.J. Chang, and S. Chang: IEEE Trans. on Image Process., 1995, vol. 4, pp. 370-378.10.1109/83.366472 ↗
26. M. Sezgin and B. Sankur: J. of Elect. Imag., 2004, vol. 13, pp. 146-168.10.1117/1.1631315 ↗
27. K. Tanaka, M. Ooshima, N. Tsuno, A. Sato, and H. Inui: Philos. Mag., 2012, vol. 92, pp. 4011-4027.10.1080/14786435.2012.700416 ↗
28. A. Suzuki, H. Inui, and T.M. Pollock: Ann. Rev. Mater. Res., 2015, vol. 45, pp. 345-368.10.1146/annurev-matsci-070214-021043 ↗
29. F. Xue, C.H. Zenk, L.P. Freund, M. Hoelzel, S. Neumeier, and M. Göken: Scr. Mater., 2018, vol. 142, pp. 129-132.10.1016/j.scriptamat.2017.08.039 ↗
30. K. Harris, G.L. Erickson, and R.E. Schwer: ASME 1983 International Gas Turbine Conference and Exhibit, 1983, vol. 5, pp. 1–11.
31. D.J. Frasier, J.R. Whetstone, K. Harris, G.L. Erickson, and R.E. Schwer: Proceedings of the Part II of Cost Conference, 1990, vol. 5, pp. 1281–90.
32. G.E. Fuchs: J. Mater. Eng. Perform., 2002, vol. 11, pp. 19-25.10.1007/s11665-002-0003-5 ↗
33. M.G. Hebsur and R.V. Miner: NASA Tech. Mem. 88950, 1987, pp. 1-11.
34. Y.M. Eggeler, J. Müller, M.S. Titus, A. Suzuki, T.M. Pollock, and E. Spieker: Acta Mater., 2016, vol. 113, pp. 335-349.10.1016/j.actamat.2016.03.077 ↗
35. K. Tanaka, T. Ohashi, K. Kishida, and H. Inui: Appl. Phys. Lett., 2007, vol. 91, p. 18190710.1063/1.2805020 ↗
36. B. Goodlet, L. Mills, B. Bales, M.A. Charpagne, S.P. Murray, W.C. Lenthe, L. Petzold, and T.M. Pollock: Metall. Mater. Trans. A, 2018, vol. 49, pp. 2324–2339.10.1007/s11661-018-4575-6 ↗
37. M.S. Titus, R.K. Rhein, P.B. Wells, P.C. Dodge, G.B. Viswanathan, M.J. Mills, A. Van der Ven, and T.M. Pollock: Sci. Adv., 2016, vol. 2, e1601796.10.1126/sciadv.1601796 ↗
38. S.K. Makineni, M. Lenz, P. Kontis, A. Kumar, P.J. Felfer, S. Neumeier, M. Herbig, E. Speicker, D. Raabe, and B. Gault: JOM, 2018, vol. 27, pp. 1–8.
39. S.M. Allen and J.W. Cahn: Acta Metall., 1979, vol. 27, pp. 1085-1095.10.1016/0001-6160(79)90196-2 ↗